转自红黑联盟Goldengate升级之目标端(replicat端升级

要升级replicat端的原因为:目标端OGG软件版本与源端OGG软件版本不同,在实际生产应用中,经常发现replicat端事务丢失的情况,所以,需要将目标端的OGG软件升级为与源端OGG相同软件版本。

1、升级前环境情况

Goldengate升级之目标端(replicat端)升级-LMLPHP

源端OGG版本11.2.1.0.1

目标端OGG版本11.1.1.1.2

升级前,为了解决源端、目标端OGG版本不一致不能正常同步的问题,在源端抽取Tail file格式时,加了format release 11.1的格式转换命令,在extract与data pump进程中均配置,其配置方式如下:

EXTTRAIL ./dirdat/tr, format release 11.1

2、升级目标

将目标端OGG版本从11.1.0.2升级到与源端一致的11.2.0.1版本

3、升级前准备

3.1 停止源端的extract和datapump进程

GGSCI>stop exttr

GGSCI>stop dpetr

3.2 停止目标端的replicat和mgr进程

GGSCI>stop reptr

GGSCI>stop mgr

3.3 去除extract和datapump进程中的format release参数

因为在extract与datadump进程中都配置有formatrelease 11.1关键字,在目标端升级后,该配置需要取消,但是,取消该配置,并不只是从配置文件中删除这么简单的事,还需要对进程做ETROLLOVER操作,否则进程启动时,会报如下错误:

ERROR OGG-01416 File ./dirdat/tr000008, with format RELEASE 10.4/11.1, does not match

current format specification of RELEASE 11.2.Modify the parameter file to specify format RELEASE 10.4/11.1

or issueETROLLOVER prior to restart.

操作方法:在OGG中以edit paramsextract_name和edit params datadump_name的方式进入进行修改(具体操作:略)。

3.4 对extract与datadump进程做ETROLLOVER操作

因为extract与datadump都修改了format release信息,所以,都需要做ETROLLOVER操作

GGSCI>alter extract exttrETROLLOVER

GGSCI>alter extract dpetrETROLLOVER

3.5 修改源端datapump进程的EXTSEQNO号和EXTRBA号

因为源端的extract-exttr进程执行ETROLLOVER操作后,进程的extseqno和extrba号被重置至下一个extseqno号的第0号extrba,而datapump并不知道extract进程发生了这个变化,仍然守望在extract ETROLLOVER前的extseqno和extrba号上,永远也等不到这个extseqno上有新的RBA变化,造成就无法将extract新抽取到的数据,传递到目标端去。

所以,在extract进程ETROLLOVER后,需要使用“Alterextract group_name EXTSEQNO X, EXTRBA 0”的命令,重置checkpoint位置,datadump进程才能正常的将数据继续传递到远端。

3.5.1 记录下exttr进程ETROLLOVER后的extseqno和extrba号

GGSCI> info exttr, detail

GGSCI (server1) 140> info exttr, detail

EXTRACT EXTTR Initialized 2015-01-30 13:02 Status STOPPED

Checkpoint Lag 00:00:00 (updated 00:00:27 ago)

Log Read Checkpoint Oracle Redo Logs

2015-01-30 13:18:27 Seqno 365, RBA 17822208

SCN 0.17726669 (17726669)

Target Extract Trails:

Remote Trail Name Seqno RBA Max MB

./dirdat/tr 4 0 100

Extract Source Begin End

……

3.5.2 修改datadump进程的extseqno和extrba号

GGSCI>Alter extract dpetr EXTSEQNO 4,EXTRBA 0

3.6 查出datadump进程ETROLLOVER后的Target ExtractTrails的extseqno和extrba号

GGSCI (server1) 160> info dpetr, detail

EXTRACT DPETR Initialized 2015-01-30 13:03 Status STOPPED

Checkpoint Lag 00:00:00 (updated 00:02:10 ago)

Log Read Checkpoint File ./dirdat/tr000003

2015-01-30 13:18:18.000000 RBA 48953966

Target Extract Trails:

Remote Trail Name Seqno RBA Max MB

./dirdat/tr 4 0 100

……

3.7 备份目标端的OGG目录

#cp –ra /u01/ogg /u01/ogg_backup

3.8 记录下目标端replicat的checkpoint信息

GGSCI (server2) 1> info reptr, showch

REPLICAT REPTR Last Started 2015-01-30 13:03 Status STOPPED

Checkpoint Lag 00:00:00 (updated 00:10:36 ago)

Log Read Checkpoint File ./dirdat/tr000003

2015-01-30 13:18:16.296427 RBA 48953996

Current Checkpoint Detail:

Read Checkpoint #1

GGS Log Trail

Startup Checkpoint (starting position in the data source):

Sequence #: 0

RBA: 0

Timestamp: Not Available

Extract Trail: ./dirdat/tr

Current Checkpoint (position of last record read in the data source):

Sequence #: 3

RBA: 48953996

Timestamp: 2015-01-30 13:18:16.296427

Extract Trail: ./dirdat/tr

……

Current Checkpoint为 Sequence #: 3 RBA: 48953996

4、OGG软件升级

4.1 将新版OGG 11.2.1.0.1软件复制到原旧版OGG目录下

$ cp ogg112101_fbo_ggs_Linux_x64_ora11g_64bit.zip/u01/ogg

4.2 删除OGG目录下的fbo_ggs_Linux_x64_ora11g_64bit.tar文件

fbo_ggs_Linux_x64_ora11g_64bit.tar文件是旧版OGG安装时解压出来的tar文件,新版OGG软件unzip解压时,也会生成此文件,当然也可以使用unzip解压时的覆盖替代手工删除

$rm fbo_ggs_Linux_x64_ora11g_64bit.tar

4.3 在原版OGG目录中安装(解压)新版OGG软件

$unzip ogg112101_fbo_ggs_Linux_x64_ora11g_64bit.zip

$tar xvf fbo_ggs_Linux_x64_ora11g_64bit.tar

4.4 验证升级成功情况

$cd $OGG

[oracle@server2 u01]$ cd $OGG

[oracle@server2 ogg]$ ./ggsci

Oracle GoldenGate Command Interpreter for Oracle

Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO

Linux, x64, 64bit (optimized), Oracle 11g on Apr 23 2012 08:32:14

Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.

GGSCI (server2) 1>

从这里看到,OGG软件版本已经升级至11.2.1.0.1

5、验证升级后replicat的checkpoint是否为一致

5.1 查看升级后replicat的checkpoint是否与升级前一致

GGSCI (server2) 46> info reptr, detail

REPLICAT REPTR Last Started 2015-01-30 13:03 Status STOPPED

Checkpoint Lag 00:00:00 (updated 00:12:58 ago)

Log Read Checkpoint File ./dirdat/tr000003

2015-01-30 13:18:16.296427 RBA 48953996

Extract Source Begin End

./dirdat/tr000003 * Initialized * 2015-01-30 13:18

./dirdat/tr000000 * Initialized * First Record

Current directory /u01/ogg

Report file /u01/ogg/dirrpt/REPTR.rpt

Parameter file /u01/ogg/dirprm/reptr.prm

Checkpoint file /u01/ogg/dirchk/REPTR.cpr

Checkpoint table GOLDENGATE.CHECKPOINT_REPTR_01

Process file /u01/ogg/dirpcs/REPTR.pcr

Stdout file /u01/ogg/dirout/REPTR.out

Error log /u01/ogg/ggserr.log

Current Checkpoint 跟升级前一样,仍为Sequence #: 3 RBA: 48953996,进一步证明升级成功。

6、验证升级后可正常同步数据场景准备

6.1 先记录下源端、目标端数据量为一致

(生产库环境此步可以跳过,因为生产库的表受业务的操作数据不断发生变化,本案例为创建一张专用用于测试升级的表进行测试)

源端

目标端

SQL> select count(*) from goldengate.ogg_upg;

COUNT(*)

----------

2150000

SQL> select count(*) from goldengate.ogg_upg;

COUNT(*)

----------

2150000

源端和目标端数据量一致。

6.2 在目标端replicat进程启动前在源端删除部分数据

SQL> delete goldengate.ogg_upg where rownum <1000001;

1000000 rows deleted.

SQL> commit;

SQL> select count(*) from goldengate.ogg_upg;

COUNT(*)

----------

1150000

7、重建目标端replicat进程

重建replicat进程的原因:ogg_11.1.1.1.2每条replicat进程只有CHECKPOINT一张表,而ogg_11.2.x.x.1每条replicat进程有CHECKPOINT,CHECKPOINT_LOX两张表,所以,如果在升级后,直接启动replicat进程,是无法启动的,会报如下错误:

ERROR OGG-00665 OCI Error describe for query (status = 942-ORA-00942: table or view does not exist), SQL<SELECT a.current_dir, a.seqno, a.rba, a.audit_ts, a.log_csn, a.log_xid, a.log_cmplt_csn, a.log_cmplt_xids, b.log_cmplt_xids FROM GOLDENGATE.CHECKPOINT_REPTR_01 a LEFT JOIN GOLDENGATE.CHECKPOINT_REPTR_01_lox b ON a.group_name = b.group_name AND a.group_key = b.group_key AND a.log_cmplt_csn = b.log_cmplt_csn WHERE a.group_name = 'REPTR' AND a.group_key = 2810015614>.

2015-01-28 05:12:59 ERROR OGG-01668 PROCESS ABENDING.

提示表不存在,这张表是指:GOLDENGATE.CHECKPOINT_REPTR_01_lox表(CHECKPOINT_LOX表),重建replicat的最终目的是让在重建进程时,自动将两张checkpoint表都自动创建起来。

7.1 删除replicat进程与checkpoint表

GGSCI>dblogin userid goldengate,password goldengate

GGSCI>delete replicat reptr

GGSCI>delete checkpointtable GOLDENGATE.CHECKPOINT_REPTR_01

7.2 重新建立replicat进程

GGSCI>dbloginuserid goldengate, password goldengate

GGSCI>add checkpointtable goldengate.checkpoint_reptr_01

GGSCI>add replicat reptr, exttrail ./dirdat/tr,checkpointtable goldengate.checkpoint_reptr_01

到这一步,replicat启动后,还是无法继续应用源端投递过来的trail的,因为源端的datapump进程做过ETROLLOVER了,所以需要手工修改replicat的sequence#和RBA号到与datadump进程的target extract trails中的seqno和RBA一致。

7.3 修改目标端replicat的extseqno和extrba号

根据上面一步,查出的源端的datadump进程的remotetrail file的seqno号和RBA,决定replicat要更改的extseqno和extrba号

GGSCI (server2) 37> Alter replicat reptrEXTSEQNO 4, EXTRBA 0

7.4 查看新建立的replicat进程的SEQ#和RBA号

GGSCI(server2) 27> info reptr, showch

GGSCI (server2) 3> info reptr, showch

REPLICAT REPTR Initialized 2015-01-30 13:39 Status STOPPED

Checkpoint Lag 00:00:00 (updated 00:00:07 ago)

Log Read Checkpoint File ./dirdat/tr000004

First Record RBA 0

Current Checkpoint Detail:

Read Checkpoint #1

GGS Log Trail

Startup Checkpoint (starting position in the data source):

Sequence #: 4

RBA: 0

Timestamp: Not Available

Extract Trail: ./dirdat/tr

Current Checkpoint (position of last record read in the data source):

Sequence #: 4

RBA: 0

Timestamp: Not Available

Extract Trail: ./dirdat/tr

……

Start checkpoint 的sequence#和RBA号已经通过手工,都定位到了源端ETROLLOVER后的状态

Current checkpoint的sequence#和RBA号已经通过手工,也都定位到了源端ETROLLOVER后的状态

7.5 查看checkpoint表的数据内容

SQL>select * from goldengate.checkpoint_reptr_01;

No rows selected

SQL>select * from goldengate.checkpoint_reptr_01_lox;

No rows selected

这时,两个checkpoint表中的数据还是空的,待replicat启动运行后,进行状态信息就会写入到checkpoint表中

8、启动源端和目标端进程

8.1 启动目标端的replicat和mgr进程

GGSCI>start mgr

GGSCI>start reptr

8.2 启动源端的datapump进程

GGSCI>start dpetr

9、验证是否能继续同步数据

此步最重要的,是要验证在升级时间时,源端所做的操作能否同步到目标库中来。本案例在升级过程中,对goldengate.ogg_upg表删除了1000000行数据。

9.1 查看目标端goldengate.ogg_upg表的数据变化

源端

目标端

SQL> select count(*) from goldengate.ogg_upg;

COUNT(*)

----------

2050000

SQL> select count(*) from goldengate.ogg_upg;

COUNT(*)

----------

2050000

9.2 目标端查看checkpoint表内check状态

select * from goldengate.checkpoint_reptr_01

-------------------------------------------------

REPTR 2149948420 4 19280017 2015-01-30 13:55:59.368501 2015/1/30 13:36:43 2015/1/30 14:01:01 /u01/ogg 17929533 7.16.20512 17929533 7.16.20512 1

从上面两步看来,升级后replicat正常的,接着升级前的状态在同步数据。

05-17 06:13