NX二次开发-创建旋转UF_MODL_create_revolved

     NX9+VS2012

     #include <uf.h>

     #include <uf_curve.h>

     #include <uf_modl.h>

     UF_initialize();

     //圆心点

     double p1[] = {0.0, 0.0, 0.0};

     tag_t CenterTag = NULL_TAG;

     UF_CURVE_create_point(p1, &CenterTag);

     //辅助点

     double HelpPoint[] = {100.0, 0.0, 0.0};

     tag_t HelpPointTag = NULL_TAG;

     UF_CURVE_create_point(HelpPoint, &HelpPointTag);

     //类型

     UF_CURVE_limit_t limit[];

     UF_CURVE_limit_p_t pLimit[] = { &limit[], &limit[] };

     limit[].limit_type = UF_CURVE_limit_value;

     limit[].value = ;//按值

     limit[].limit_type = UF_CURVE_limit_value;

     limit[].value = ;//按值

     //创建XZ基准平面,用来放圆弧

     double PlanePoint[] = { 0.0, 0.0, 0.0 };

     double Direction1[] = { 1.0, 0.0, 0.0 };

     tag_t DplaneTag = NULL_TAG;

     UF_MODL_create_fixed_dplane(PlanePoint, Direction1, &DplaneTag);

     tag_t ArcTag = NULL_TAG;

     UF_CURVE_create_arc_center_radius(CenterTag, , HelpPointTag, pLimit, DplaneTag, FALSE, &ArcTag);

     //创建直线

     UF_CURVE_line_t LineCoods1;

     LineCoods1.start_point[] = 0.0;

     LineCoods1.start_point[] = 0.0;

     LineCoods1.start_point[] = 0.0;

     LineCoods1.end_point[] = 0.0;

     LineCoods1.end_point[] = 100.0;

     LineCoods1.end_point[] = 0.0;

     tag_t Line1Tag = NULL_TAG;

     UF_CURVE_create_line(&LineCoods1, &Line1Tag);

     UF_CURVE_line_t LineCoods2;

     LineCoods2.start_point[] = 0.0;

     LineCoods2.start_point[] = 0.0;

     LineCoods2.start_point[] = 0.0;

     LineCoods2.end_point[] = 0.0;

     LineCoods2.end_point[] = 0.0;

     LineCoods2.end_point[] = -100.0;

     tag_t Line2Tag = NULL_TAG;

     UF_CURVE_create_line(&LineCoods2, &Line2Tag);

     //创建旋转

     uf_list_p_t EdgeLits;

     UF_MODL_create_list(&EdgeLits);//创建链表

     UF_MODL_put_list_item(EdgeLits, Line1Tag);//Tag添加到链表

     UF_MODL_put_list_item(EdgeLits, Line2Tag);

     UF_MODL_put_list_item(EdgeLits, ArcTag);

     char *Limit[] = { "0.0", "360.0" };

     double Point1[] = { 0.0, 0.0, 0.0 };

     double Direction[] = { 0.0, 0.0, 1.0 };

     UF_FEATURE_SIGN Sign = UF_NULLSIGN;

     uf_list_p_t FeatureList;

     UF_MODL_create_revolved(EdgeLits, Limit, Point1, Direction, Sign, &FeatureList);

     UF_MODL_delete_list(&FeatureList);//删除链表

     UF_MODL_delete_list(&EdgeLits);

     UF_terminate();