Gerrit和Gitlab服务器的集成
作者：尹正杰
版权声明：原创作品，谢绝转载！否则将追究法律责任。
一.安装gitlab
详情请参考：https://www.cnblogs.com/yinzhengjie/p/9568657.html
二.在Gitlib上创建项目
1>.点击"New Project"
2>.自定义项目名称
3>.项目创建成功，点击README链接
4>.编辑REDEME文件
5>.文件添加成功
三.Gerrit创建同名的项目
1>.点击存储库
2>.点击"CREATE NEW"
3>.点击"CREATE"
4>.项目创建成功
四.在Gerrit服务器上克隆代码到本地
1>.在Gerrit生成密钥
[[email protected] ~]# ssh-keygen -t rsa -P '' -f ~/.ssh/id_rsa
Generating public/private rsa key pair.
Created directory '/root/.ssh'.
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:9ROz1CLGzbskWd0nvJMc1jfgmOez8Lpm7kcz1YjSb7k [email protected]
The key's randomart image is:
+---[RSA ]----+
| . |
| . o++.o |
| =+O+Bo*|
| o.*=O.*=|
| S oo*+*. |
| oo**. |
| o+o. |
| o..E |
| ==o |
+----[SHA256]-----+
[[email protected] ~]#
[[email protected] ~]#
[[email protected] ~]# cat ~/.ssh/id_rsa.pub
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC+28LdoSvWfllJVfD0OdWV4ku3bIO5u/AtatQJrYhBifIWnWa2WnIQggz6/KIBWF/QCJHzGaPpZrjVzvPnJaDMwaQNFIutSPchob/HebQ7SRI09a1xRHCYZ3hJzSvaYLDrOt41HHAW2gTTmWMQTMtnX0ZZpst6HHwHluCqWCX6j7uNK2jDgOfGxC4RzbR6bVVYsZ2vN+6BvFyrfHL5wUBsIwKBxgfuHj+a0+i6LJtfyqkom/VTLEtvCnizBw41UMPm/rlH5rBIfE52qjrFqgqg2d9Uaz6st7stmguToPwCHjGUPqJVKk2Cf8JaHUOXsP8o73gXESbe9GSZEgqtpapd [email protected]
[[email protected] ~]#
2>.将公钥拷贝到gitlab上
3>.将公钥拷贝到Gerrit上
4>.将gitlab的代码克隆到本地
[[email protected] ~]# cd /yinzhengjie/softwares/gerrit/
[[email protected] /yinzhengjie/softwares/gerrit]#
[[email protected] /yinzhengjie/softwares/gerrit]# ll
total
drwxr-xr-x root root Jun : All-Projects.git
drwxr-xr-x root root Jun : All-Users.git
drwxr-xr-x root root Jun : yinzhengjie_code.git
[[email protected] /yinzhengjie/softwares/gerrit]#
[[email protected] /yinzhengjie/softwares/gerrit]# rm -rf yinzhengjie_code.git #先将Gerrit创建的同名项目删除
[[email protected] /yinzhengjie/softwares/gerrit]#
[[email protected] /yinzhengjie/softwares/gerrit]# ll
total
drwxr-xr-x root root Jun : All-Projects.git
drwxr-xr-x root root Jun : All-Users.git
[[email protected] /yinzhengjie/softwares/gerrit]#
[[email protected] /yinzhengjie/softwares/gerrit]# git clone --bare [email protected]:root/yinzhengjie_code.git #然后把gitlab的项目克隆到Gerrit的目录中
Cloning into bare repository 'yinzhengjie_code.git'...
The authenticity of host 'gitlab.yinzhengjie.org.cn (172.30.1.80)' can't be established.
ECDSA key fingerprint is SHA256:dxYzHaEpkoSjSE0UDEtz14Y4dCn+GX3HJZ+P8AzsF54.
ECDSA key fingerprint is MD5:f6:a9:3b::2c::2f:e3:d7:2f:0b:fb:b2::4f:.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'gitlab.yinzhengjie.org.cn,172.30.1.80' (ECDSA) to the list of known hosts.
remote: Counting objects: , done.
remote: Total (delta ), reused (delta )
Receiving objects: % (/), done.
[[email protected] /yinzhengjie/softwares/gerrit]#
[[email protected] /yinzhengjie/softwares/gerrit]# ll
total
drwxr-xr-x root root Jun : All-Projects.git
drwxr-xr-x root root Jun : All-Users.git
drwxr-xr-x root root Jun : yinzhengjie_code.git
[[email protected] /yinzhengjie/softwares/gerrit]#
5>.客户端克隆Gerrit的代码（同理，客户端需要把公钥内容上传到Gerrit服务器）
[[email protected] ~]# git clone "ssh://[email protected]:29418/yinzhengjie_code" #我们在客户端把Gerrit的项目克隆到本地
Cloning into 'yinzhengjie_code'...
The authenticity of host '[gerrit.yinzhengjie.org.cn]:29418 ([172.30.1.81]:29418)' can't be established.
ECDSA key fingerprint is SHA256:LfFtLE0id3OuNcGSZokcrCFCv9HxzJtS8xIqLWw+SIM.
ECDSA key fingerprint is MD5::ae:2d::::::ef:7f::::5c::0a.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '[gerrit.yinzhengjie.org.cn]:29418,[172.30.1.81]:29418' (ECDSA) to the list of known hosts.
remote: Counting objects: , done
remote: Finding sources: % (/)
remote: Total (delta ), reused (delta )
Receiving objects: % (/), done.
[[email protected] ~]#
[[email protected] ~]# ll
total
drwxr-xr-x root root Jun : yinzhengjie_code
[[email protected] ~]#
[[email protected] ~]# ll yinzhengjie_code/
total
-rw-r--r-- root root Jun : README.md
[[email protected] ~]#
[[email protected] ~]# more yinzhengjie_code/README.md #查看我们聪Gerrit服务器下载的代码，其内容和Gitlab数据是一致的。
BLOG:https://www.cnblogs.com/yinzhengjie/
[[email protected] ~]#
五.配置Gerrit和Gitlab互信
1>.在Gerrit服务器上配置和Gitlab互信
[[email protected] ~]# ssh-copy-id [email protected]
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: key(s) remain to be installed -- if you are prompted now it is to install the new keys
[email protected]'s password: Number of key(s) added: Now try logging into the machine, with: "ssh '[email protected]'"
and check to make sure that only the key(s) you wanted were added. [[email protected] ~]#
[[email protected] ~]# ssh gitlab.yinzhengjie.org.cn
Last login: Tue Jun :: from 172.30.1.1
[[email protected] ~]#
[[email protected] ~]# who
root pts/ -- : (172.30.1.1)
root pts/ -- : (172.30.1.81)
[[email protected] ~]#
[[email protected] ~]# logout
Connection to gitlab.yinzhengjie.org.cn closed.
[[email protected] ~]#
[[email protected] ~]#
2>.在Gitlab上配置和Gerrit互信
[[email protected] ~]# ssh-keygen -t rsa -P '' -f ~/.ssh/id_rsa
Generating public/private rsa key pair.
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:vlO7fU06xQYclRWDbjs6hKCp/zX+OSCSh6gLFJBDpPY [email protected]
The key's randomart image is:
+---[RSA ]----+
|++ .+*|
|= ....|
|.+ .. . |
|. o . oo |
| . E. = S . . .o |
|. . * + o.. o =|
|. . . o o+o.. .* |
|.. . +.o=. + .|
| .. .....oo++. . |
+----[SHA256]-----+
[[email protected] ~]#
[[email protected] ~]#
[[email protected] ~]# ssh-copy-id gerrit.yinzhengjie.org.cn
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host 'gerrit.yinzhengjie.org.cn (172.30.1.81)' can't be established.
ECDSA key fingerprint is SHA256:dxYzHaEpkoSjSE0UDEtz14Y4dCn+GX3HJZ+P8AzsF54.
ECDSA key fingerprint is MD5:f6:a9:3b::2c::2f:e3:d7:2f:0b:fb:b2::4f:.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: key(s) remain to be installed -- if you are prompted now it is to install the new keys
[email protected]'s password: Number of key(s) added: Now try logging into the machine, with: "ssh 'gerrit.yinzhengjie.org.cn'"
and check to make sure that only the key(s) you wanted were added. [[email protected] ~]#
[[email protected] ~]# ssh gerrit.yinzhengjie.org.cn
Last login: Tue Jun ::
[[email protected] ~]#
[[email protected] ~]# who
root pts/ -- : (172.30.1.1)
root pts/ -- : (172.30.1.1)
root pts/ -- : (172.30.1.80)
[[email protected] ~]#
[[email protected] ~]#
[[email protected] ~]# logout
Connection to gerrit.yinzhengjie.org.cn closed.
[[email protected] ~]#
[[email protected] ~]#
六.在Gerrit服务器上编辑同步Gitlab的配置文件
1>.编辑 “review_site/.ssh/config”配置文件，需要手动创建（同步gitlab的项目用的）
[[email protected] ~]# ll review_site/etc/
total
-rw-r--r-- root root Jun : gerrit.config
drwxr-xr-x root root Jun : mail
-rw------- root root Jun : secure.config
-rw------- root root Jun : ssh_host_ecdsa_384_key
-rw-r--r-- root root Jun : ssh_host_ecdsa_384_key.pub
-rw------- root root Jun : ssh_host_ecdsa_521_key
-rw-r--r-- root root Jun : ssh_host_ecdsa_521_key.pub
-rw------- root root Jun : ssh_host_ecdsa_key
-rw-r--r-- root root Jun : ssh_host_ecdsa_key.pub
-rw------- root root Jun : ssh_host_ed25519_key
-rw-r--r-- root root Jun : ssh_host_ed25519_key.pub
-rw------- root root Jun : ssh_host_rsa_key
-rw-r--r-- root root Jun : ssh_host_rsa_key.pub
[[email protected] ~]#
[[email protected] ~]#
[[email protected] ~]# mkdir review_site/.ssh
[[email protected] ~]#
[[email protected] ~]# vi review_site/.ssh/config
[[email protected] ~]#
[[email protected] ~]# cat review_site/.ssh/config
HOST 172.30.1.80 # 这个IP是gitlab服务器的IP地址 IdentityFile ~/.ssh/id_rsa PreferredAuthenticationns publickey
[[email protected] ~]#
[[email protected] ~]# ll review_site/.ssh/config
-rw-r--r-- root root Jun : review_site/.ssh/config
[[email protected] ~]#
[[email protected] ~]# chmod review_site/.ssh/config #修改权限~降低安全风险
[[email protected] ~]#
[[email protected] ~]# ll review_site/.ssh/config
-rw------- root root Jun : review_site/.ssh/config
[[email protected] ~]#
2>.配置gerrit replication功能（用于复制具体项目）
[[email protected] ~]# ll review_site/
total
drwxr-xr-x root root Jun : bin
drwxr-xr-x root root Jun : cache
drwxr-xr-x root root Jun : data
drwxr-xr-x root root Jun : db
drwxr-xr-x root root Jun : etc
drwxr-xr-x root root Jun : git
drwxr-xr-x root root Jun : index
drwxr-xr-x root root Jun : lib
drwxr-xr-x root root Jun : logs
drwxr-xr-x root root Jun : plugins
drwxr-xr-x root root Jun : static
drwx------ root root Jun : tmp
[[email protected] ~]#
[[email protected] ~]# cat ~/review_site/etc/replication.config #该文件需要手动创建
[remote "yinzhengjie_code"] #remote后面是项目名称 projects = yinzhengjie_code #也是项目名称 url = [email protected]:root/yinzhengjie_code.git #就是你gitlab服务器上面的项目刻隆地址，注意，这边使用提ssh协议进行刻隆的， 所以不要选择http方式了。 push = +refs/heads/*:refs/heads/* push = +refs/tags/*:refs/tags/* push = +refs/changes/*:refs/changes/* threads = 3
[[email protected] ~]#
[[email protected] ~]#
3>.重启Gerrit服务
[[email protected] ~]# cd review_site/bin/
[[email protected] ~/review_site/bin]# ll
total
-rwxr-xr-x root root Jun : gerrit.service
-rwxr-xr-x root root Jun : gerrit.sh
-rwxr-xr-x root root Jun : gerrit.socket
-rw-r--r-- root root Jun : gerrit.war
[[email protected] ~/review_site/bin]#
[[email protected] ~/review_site/bin]# ./gerrit.sh restart
Stopping Gerrit Code Review: OK
Starting Gerrit Code Review: OK
[[email protected] ~/review_site/bin]#
七.验证Gerrit和Gitlab的集成效果-使用客户端直接提交代码到Gitlab
1>.客户端克隆Gerrit代码后直接提交给master分支
[[email protected] ~]# git clone "ssh://[email protected]:29418/yinzhengjie_code"
Cloning into 'yinzhengjie_code'...
remote: Counting objects: , done
remote: Finding sources: % (/)
remote: Total (delta ), reused (delta )
Receiving objects: % (/), done.
[[email protected] ~]#
[[email protected] ~]# ll
total
drwxr-xr-x root root Jun : yinzhengjie_code
[[email protected] ~]#
[[email protected] ~]# cd yinzhengjie_code/
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# ll
total
-rw-r--r-- root root Jun : README.md
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# echo "https://www.cnblogs.com/yinzhengjie/" >> blog.txt
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# ll
total
-rw-r--r-- root root Jun : blog.txt
-rw-r--r-- root root Jun : README.md
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# git add blog.txt
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# git config --global user.name "admin"
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# git config --global user.email "[email protected]"
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# git commit -m "add blog.txt"
[master d064e5b] add blog.txt
file changed, insertion(+)
create mode blog.txt
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# git push #我们直接提交到master，数据会直接提交的Gerrit中，而我们在Gerrit中编写了同步的文件，因此，咱们没有通过Gerrit审核就直接提交到gitlab中去啦！！！生产环境并不推荐这样搞
warning: push.default is unset; its implicit value is changing in
Git 2.0 from 'matching' to 'simple'. To squelch this message
and maintain the current behavior after the default changes, use: git config --global push.default matching To squelch this message and adopt the new behavior now, use: git config --global push.default simple See 'git help config' and search for 'push.default' for further information.
(the 'simple' mode was introduced in Git 1.7.. Use the similar mode
'current' instead of 'simple' if you sometimes use older versions of Git) Counting objects: , done.
Delta compression using up to threads.
Compressing objects: % (/), done.
Writing objects: % (/), bytes | bytes/s, done.
Total (delta ), reused (delta )
remote: Processing changes: refs: , done
To ssh://[email protected]:29418/yinzhengjie_code
23b4540..d064e5b master -> master
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]#
2>.查看Gerrit日志
[[email protected] ~]# cat review_site/logs/replication_log
[-- ::,] [] scheduling replication yinzhengjie_code:refs/heads/master => [email protected]:root/yinzhengjie_code.git
[-- ::,] [] scheduled yinzhengjie_code:refs/heads/master => [edcdfd7f] push [email protected]:root/yinzhengjie_code.git to run after 15s
[-- ::,] [edcdfd7f] Replication to [email protected]:root/yinzhengjie_code.git started...
[-- ::,] [edcdfd7f] Push to [email protected]:root/yinzhengjie_code.git references: [RemoteRefUpdate[remoteName=refs/heads/master, NOT_ATTEMPTED, (null)...d064e5b53b48fe757ceea8714ff49de200ed2949, srcRef=refs/heads/master, forceUpdate, message=null]]
[-- ::,] [edcdfd7f] Replication to [email protected]:root/yinzhengjie_code.git completed in 824ms, 15004ms delay, retries
[[email protected] ~]#
3>.查看gitlab库中的文件
4>.查看blog.txt文件内容,的确和我们写的文件内容是一致的
八.验证Gerrit和Gitlab的集成效果-使用客户端提交代码到Gerrit后，由Gerrit审核通过后在提交到Gitlab
1>.客户端克隆Gerrit代码后直接提交给master分支
[[email protected] ~]# git clone "ssh://[email protected]:29418/yinzhengjie_code" && scp -p -P [email protected]:hooks/commit-msg "yinzhengjie_code/.git/hooks/"
Cloning into 'yinzhengjie_code'...
remote: Counting objects: , done
remote: Finding sources: % (/)
remote: Total (delta ), reused (delta )
Receiving objects: % (/), bytes | bytes/s, done.
commit-msg % .0MB/s :
[[email protected] ~]#
[[email protected] ~]# cd yinzhengjie_code/
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# ll
total
-rw-r--r-- root root Jun : blog.txt
-rw-r--r-- root root Jun : README.md
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# echo "尹正杰" > name.list
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# git config --global user.name "admin"
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# git config --global user.email "[email protected]"
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# git add name.list
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# git commit -m "add name.list"
[master ce71335] add name.list
file changed, insertion(+)
create mode name.list
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# git push origin HEAD:refs/for/master
Counting objects: , done.
Delta compression using up to threads.
Compressing objects: % (/), done.
Writing objects: % (/), bytes | bytes/s, done.
Total (delta ), reused (delta )
remote: Processing changes: refs: , new: , done
remote:
remote: SUCCESS
remote:
remote: http://gerrit.yinzhengjie.org.cn/c/yinzhengjie_code/+/1 add name.list [NEW]
remote:
To ssh://gerrit.yinzhengjie.org.cn:29418/yinzhengjie_code
* [new branch] HEAD -> refs/for/master
[[email protected] ~/yinzhengjie_code]#
[[email protected] ~/yinzhengjie_code]# git --version #需要注意的是，git版本最好使用git2.X版本哟~，否则在将代码push到Gerrit的时候可能会报错~在Gerrit服务端git版本好像git1.X版本也可以正常使用。
git version 2.12.
[[email protected] ~/yinzhengjie_code]#
2>.查看Gerrit的Web UI界面
3>.在Gerrit还没有通过审批之前，我们克隆一下Gerrit代码
[[email protected] ~]# ll yinzhengjie_code/ #这是我们提交到Gerrit的代码
total
-rw-r--r-- root root Jun : blog.txt
-rw-r--r-- root root Jun : name.list
-rw-r--r-- root root Jun : README.md
[[email protected] ~]#
[[email protected] ~]# rm -rf yinzhengjie_code/ #我们将源文件删除
[[email protected] ~]#
[[email protected] ~]# git clone "ssh://[email protected]:29418/yinzhengjie_code" #从Gerrit的库中clone一份出来，观察里面的内容。
Cloning into 'yinzhengjie_code'...
remote: Counting objects: , done
remote: Finding sources: % (/)
remote: Total (delta ), reused (delta )
Receiving objects: % (/), done.
[[email protected] ~]#
[[email protected] ~]# ll yinzhengjie_code/ #很显然，代码库中并没有我们提交的代码
total
-rw-r--r-- root root Jun : blog.txt
-rw-r--r-- root root Jun : README.md
[[email protected] ~]#
[[email protected] ~]#
4>.在Gerrit还没有通过审批之前，我们克隆一下Gitlab代码
[[email protected] ~]# ll
total
drwxr-xr-x root root Jun : yinzhengjie_code
[[email protected] ~]#
[[email protected] ~]# rm -rf yinzhengjie_code/ #删除源文件
[[email protected] ~]#
[[email protected] ~]# git clone [email protected]:root/yinzhengjie_code.git #将gitlab的代码克隆到本地。
Cloning into 'yinzhengjie_code'...
The authenticity of host 'gitlab.yinzhengjie.org.cn (172.30.1.80)' can't be established.
ECDSA key fingerprint is SHA256:dxYzHaEpkoSjSE0UDEtz14Y4dCn+GX3HJZ+P8AzsF54.
ECDSA key fingerprint is MD5:f6:a9:3b::2c::2f:e3:d7:2f:0b:fb:b2::4f:.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'gitlab.yinzhengjie.org.cn,172.30.1.80' (ECDSA) to the list of known hosts.
remote: Counting objects: , done.
remote: Compressing objects: % (/), done.
remote: Total (delta ), reused (delta )
Receiving objects: % (/), done.
[[email protected] ~]#
[[email protected] ~]# ll yinzhengjie_code/ #很显然，我们发现提交的代码既不在Gerrit中也不再Gitlab中。
total
-rw-r--r-- root root Jun : blog.txt
-rw-r--r-- root root Jun : README.md
[[email protected] ~]#
5>.评审Chenge
6>.点击"Submit",会将代码同步到Gerrit存储库，需要注意的是，Gerrit存储库我们配置和Gitla集成，因此2个同名的存储库数据应该时一致的哟~
7>点击“CONTINUE”
8>.Change提交成功
9>.查看Change状态
10>.在Gerrit通过审批之后，我们克隆一下Gerrit代码
[[email protected] ~]# ll
total
drwxr-xr-x root root Jun : yinzhengjie_code
[[email protected] ~]#
[[email protected] ~]# ll yinzhengjie_code/ #在审核之前，我们发现代码并没有被合并到主分支
total
-rw-r--r-- root root Jun : blog.txt
-rw-r--r-- root root Jun : README.md
[[email protected] ~]#
[[email protected] ~]# rm -rf yinzhengjie_code
[[email protected] ~]#
[[email protected] ~]#
[[email protected] ~]# git clone "ssh://[email protected]:29418/yinzhengjie_code" #当我们审批通过后，再次clone代码进行观察
Cloning into 'yinzhengjie_code'...
remote: Counting objects: , done
remote: Finding sources: % (/)
Receiving objects: % (/), done.
remote: Total (delta ), reused (delta )
[[email protected] ~]#
[[email protected] ~]#
[[email protected] ~]# ll yinzhengjie_code/ #很显然，多了一个我们之前提交的文件"name.list",说明我们测试成功啦~
total
-rw-r--r-- root root Jun : blog.txt
-rw-r--r-- root root Jun : name.list
-rw-r--r-- root root Jun : README.md
[[email protected] ~]#
[[email protected] ~]#
11>.在Gerrit通过审批之后，我们克隆一下Gitlab代码
[[email protected] ~]# rm -rf yinzhengjie_code/
[[email protected] ~]#
[[email protected] ~]# git clone [email protected]:root/yinzhengjie_code.git
Cloning into 'yinzhengjie_code'...
remote: Counting objects: , done.
remote: Compressing objects: % (/), done.
remote: Total (delta ), reused (delta )
Receiving objects: % (/), done.
Resolving deltas: % (/), done.
[[email protected] ~]#
[[email protected] ~]#
[[email protected] ~]# ll yinzhengjie_code/ #不难发现，通过Gerrit审批后，Gitlab中的数据也被同步啦~这充分说明Gerrit和Gitlab集成成功啦~
total
-rw-r--r-- root root Jun : blog.txt
-rw-r--r-- root root Jun : name.list
-rw-r--r-- root root Jun : README.md
[[email protected] ~]#
[[email protected] ~]#