简述
前面分享了QTableView中怎样加入复选框。
本节主要介绍QTableView中的表头-QHeaderView加入复选框的功能,以下以水平表头为例。垂直表头相似!
效果
QHeaderView
源代码
TableHeaderView::TableHeaderView(Qt::Orientation orientation, QWidget *parent)
: QHeaderView(orientation, parent),
m_bPressed(false),
m_bChecked(false),
m_bTristate(false),
m_bNoChange(false),
m_bMoving(false)
{
// setStretchLastSection(true);
setHighlightSections(false);
setMouseTracking(true);
// 响应鼠标
setSectionsClickable(true);
}
// 槽函数,用于更新复选框状态
void TableHeaderView::onStateChanged(int state)
{
if (state == Qt::PartiallyChecked) {
m_bTristate = true;
m_bNoChange = true;
} else {
m_bNoChange = false;
}
m_bChecked = (state != Qt::Unchecked);
update();
}
// 绘制复选框
void TableHeaderView::paintSection(QPainter *painter, const QRect &rect, int logicalIndex) const
{
painter->save();
QHeaderView::paintSection(painter, rect, logicalIndex);
painter->restore();
if (logicalIndex == CHECK_BOX_COLUMN)
{
QStyleOptionButton option;
option.initFrom(this);
if (m_bChecked)
option.state |= QStyle::State_Sunken;
if (m_bTristate && m_bNoChange)
option.state |= QStyle::State_NoChange;
else
option.state |= m_bChecked ?
QStyle::State_On : QStyle::State_Off;
if (testAttribute(Qt::WA_Hover) && underMouse()) {
if (m_bMoving)
option.state |= QStyle::State_MouseOver;
else
option.state &= ~QStyle::State_MouseOver;
}
QCheckBox checkBox;
option.iconSize = QSize(20, 20);
option.rect = rect;
style()->drawPrimitive(QStyle::PE_IndicatorCheckBox, &option, painter, &checkBox);
//style()->drawItemPixmap(painter, rect, Qt::AlignCenter, QPixmap(":/images/checkBoxChecked"));
//style()->drawControl(QStyle::CE_CheckBox, &option, painter, this);
}
}
// 鼠标按下表头
void TableHeaderView::mousePressEvent(QMouseEvent *event)
{
int nColumn = logicalIndexAt(event->pos());
if ((event->buttons() & Qt::LeftButton) && (nColumn == CHECK_BOX_COLUMN))
{
m_bPressed = true;
}
else
{
QHeaderView::mousePressEvent(event);
}
}
// 鼠标从表头释放。发送信号,更新model数据
void TableHeaderView::mouseReleaseEvent(QMouseEvent *event)
{
if (m_bPressed)
{
if (m_bTristate && m_bNoChange)
{
m_bChecked = true;
m_bNoChange = false;
}
else
{
m_bChecked = !m_bChecked;
}
update();
Qt::CheckState state = m_bChecked ? Qt::Checked : Qt::Unchecked;
emit stateChanged(state);
}
else
{
QHeaderView::mouseReleaseEvent(event);
}
m_bPressed = false;
}
// 鼠标滑过、离开,更新复选框状态
bool TableHeaderView::event(QEvent *event)
{
if (event->type() == QEvent::Enter || event->type() == QEvent::Leave)
{
QMouseEvent *pEvent = static_cast<QMouseEvent *>(event);
int nColumn = logicalIndexAt(pEvent->x());
if (nColumn == CHECK_BOX_COLUMN)
{
m_bMoving = (event->type() == QEvent::Enter);
update();
return true;
}
}
return QHeaderView::event(event);
}
接口说明
onStateChanged
槽函数,与model关联。当model的数据发生变化时,表头复选中状态也随之变化。paintSection
绘制部分,主要用于绘制复选框,主要设置QStyleOptionButton的状态。然后通过QStyle的drawPrimitive绘制样式。mousePressEvent
鼠标按下表头,设置被按下的标志为true。mouseReleaseEvent
鼠标从表头释放。发送信号,更新model数据。event
鼠标滑过、离开。更新复选框状态。
QAbstractTableModel
源代码
源代码过多,这里仅仅贴更改部分及新增部分,其他部分请參考:Qt之QTableView加入复选框(QAbstractItemDelegate)
// 设置表格项数据
bool TableModel::setData(const QModelIndex &index, const QVariant &value, int role)
{
if (!index.isValid())
return false;
int nColumn = index.column();
FileRecord record = m_recordList.at(index.row());
switch (role)
{
case Qt::DisplayRole:
{
if (nColumn == File_PATH_COLUMN)
{
record.strFilePath = value.toString();
m_recordList.replace(index.row(), record);
emit dataChanged(index, index);
return true;
}
}
case Qt::CheckStateRole:
case Qt::UserRole:
{
if (nColumn == CHECK_BOX_COLUMN)
{
record.bChecked = value.toBool();
m_recordList.replace(index.row(), record);
emit dataChanged(index, index);
if (role == Qt::UserRole)
onStateChanged();
return true;
}
}
default:
return false;
}
return false;
}
// 复选状态改变,通知表头更新复选状态
void TableModel::onStateChanged()
{
Qt::CheckState state = Qt::Unchecked;
int nCount = m_recordList.count();
int nSelectedCount = 0;
FileRecord record;
for (int i = 0; i < nCount; ++i)
{
record = m_recordList.at(i);
if (record.bChecked)
++nSelectedCount;
}
if (nSelectedCount >= nCount)
{
state = Qt::Checked;
}
else if (nSelectedCount > 0)
{
state = Qt::PartiallyChecked;
}
emit stateChanged(state);
}
// 接收表头复选状态更新变化。改动表格复选状态
void TableModel::onStateChanged(int state)
{
QModelIndex index;
for (int i = 0; i < rowCount(); ++i)
{
index = this->index(i, CHECK_BOX_COLUMN);
setData(index, state == Qt::Checked, Qt::CheckStateRole);
}
}
接口说明
setData
设置表格项数据,关键代码:当role为Qt::UserRole时候,会调用onStateChanged()函数,来更新表头!onStateChanged
复选状态改变,通知表头更新复选状态。onStateChanged(int state)
槽函数,接收表头复选状态更新变化,改动表格复选状态。
使用
这时,就须要将header与model的信号与槽关联起来,更新复选框状态了!
QTableView *pTableView = new QTableView(this);
TableModel *pModel = new TableModel(this);
TableHeaderView *pHeader = new TableHeaderView(Qt::Horizontal, this);
CheckBoxDelegate *pDelegate = new CheckBoxDelegate(this);
pTableView->setHorizontalHeader(pHeader);
pTableView->setModel(pModel);
pTableView->setItemDelegate(pDelegate);
connect(pModel, SIGNAL(stateChanged(int)), pHeader, SLOT(onStateChanged(int)));
connect(pHeader, SIGNAL(stateChanged(int)), pModel, SLOT(onStateChanged(int)));