OLED液晶屏幕（1）OLED液晶屏幕ssd1306驱动芯片 arduino运行 ESP8266-07可以 12f不可以

OLED屏幕有各种形状和尺寸，但目前有两种非常受欢迎的屏幕尺寸。

1）0.96“

2）1.3“

他们也有2种常见的颜色

1）蓝色

2）白色

驱动OLED的芯片常用的有两种。这两种芯片有许多非常相似的设置命令（在大多数情况下相同），但用于显示信息的命令集是不同的，所以你不能只是改变屏幕 - 你需要更改程序/库来适合相应的芯片！

1）SH1106

2）SSD1306

https://item.taobao.com/item.htm?spm=a1z09.2.0.0.91172e8dcnKcE5&id=563407725788&_u=51qf7bf556f8

https://blog.csdn.net/ling3ye/article/details/53399305

https://startingelectronics.org/tutorials/arduino/modules/OLED-128x64-I2C-display/

Arduino Uno OLED接线

下图显示了如何将Geekcreit 0.96英寸OLED I2C显示器连接到Arduino。用于将OLED显示器连接到Arduino Uno的引脚连接如下。

• OLED GND - Arduino GND
• OLED VCC - Arduino 5V
• OLED SCL - Arduino Uno A5
• OLED SDA - Arduino Uno A4

Arduino MEGA 2560 OLED接线

用于将Arduino MEGA 2560连接到OLED显示器的引脚连接如下。

• OLED GND - Arduino GND
• OLED VCC - Arduino 5V
• OLED SCL - Arduino MEGA 2560引脚21
• OLED SDA - Arduino MEGA 2560引脚20

ESP8266-07 连线方式

VCC-5v

GND-GND

SCL-D1

SDA-D2

esp8266-12f死活不显示

用于SSD1306和图形功能的ArduinoOLEDI²C库

必须安装两个Arduino库才能开始使用显示器。SSD1306驱动程序库用于初始化显示并提供低级显示功能。GFX库提供用于显示文本，绘图线和圆圈等的图形功能。这两个库都可以从Adafruit获得。

安装SSD1306驱动程序库

1手动安装。下载Adafruit_SSD1306库，该库将保存到您的计算机中，名为Adafruit_SSD1306-master.zip。

将Adafruit_SSD1306-master文件夹从下载的压缩文件复制到Arduino 库文件夹中。此文件夹通常位于Windows系统上的Documents→Arduino→库中。在Linux上，它通常位于主文件夹 →Arduino→库中。

最后在Arduino库文件夹中，将Adafruit_SSD1306-master文件夹重命名为Adafruit_SSD1306。

2自动安装

安装GFX库

下载Adafruit_GFX库，该库保存在您的计算机中，名为Adafruit-GFX-Library-master.zip。

将Adafruit-GFX-Library-master文件夹从下载的压缩文件复制到Arduino库文件夹，如上面的SSD1306驱动程序所做。

在Arduino库文件夹中，将Adafruit-GFX-Library-master文件夹重命名为Adafruit_GFX。

使用

找到显示屏spi的地址，修改成 0x3C(源库代码打开可能是0x3D)

源代码修改

开启 128*64的注释（ESP8266-07使用的是这个正常工作）

关闭源代码 128*32的注释（arduino mega 2560使用的是这个正常工作）

直接烧录

有报错

参看1

mega 2560板子型号选择

ESP8266-07板子型号选择

/**************************************************************************

 This is an example for our Monochrome OLEDs based on SSD1306 drivers

 Pick one up today in the adafruit shop!

 ------> http://www.adafruit.com/category/63_98

 This example is for a 128x32 pixel display using I2C to communicate

 3 pins are required to interface (two I2C and one reset).

 Adafruit invests time and resources providing this open

 source code, please support Adafruit and open-source

 hardware by purchasing products from Adafruit!

 Written by Limor Fried/Ladyada for Adafruit Industries,

 with contributions from the open source community.

 BSD license, check license.txt for more information

 All text above, and the splash screen below must be

 included in any redistribution.

 **************************************************************************/

#include <SPI.h>

#include <Wire.h>

#include <Adafruit_GFX.h>

#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels

#define SCREEN_HEIGHT 64 // OLED display height, in pixels

// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)

#define OLED_RESET    -1 //4  Reset pin # (or -1 if sharing Arduino reset pin)

Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

#define NUMFLAKES     10 // Number of snowflakes in the animation example

#define LOGO_HEIGHT   16

#define LOGO_WIDTH    16

static const unsigned char PROGMEM logo_bmp[] =

{ B00000000, B11000000,

  B00000001, B11000000,

  B00000001, B11000000,

  B00000011, B11100000,

  B11110011, B11100000,

  B11111110, B11111000,

  B01111110, B11111111,

  B00110011, B10011111,

  B00011111, B11111100,

  B00001101, B01110000,

  B00011011, B10100000,

  B00111111, B11100000,

  B00111111, B11110000,

  B01111100, B11110000,

  B01110000, B01110000,

  B00000000, B00110000 };

void setup() {

  Serial.begin(9600);

  // SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally

  if(!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { // Address 0x3D for 128x64

    Serial.println("SSD1306 allocation failed");

    for(;;); // Don't proceed, loop forever

  }

  Serial.println("success");

  // Show initial display buffer contents on the screen --

  // the library initializes this with an Adafruit splash screen.

  display.display();

  delay(2000); // Pause for 2 seconds

  // Clear the buffer

  display.clearDisplay();

  // Draw a single pixel in white

  display.drawPixel(10, 10, WHITE);

  // Show the display buffer on the screen. You MUST call display() after

  // drawing commands to make them visible on screen!

  display.display();

  delay(2000);

  // display.display() is NOT necessary after every single drawing command,

  // unless that's what you want...rather, you can batch up a bunch of

  // drawing operations and then update the screen all at once by calling

  // display.display(). These examples demonstrate both approaches...

  testdrawline();      // Draw many lines

  testdrawrect();      // Draw rectangles (outlines)

  testfillrect();      // Draw rectangles (filled)

  testdrawcircle();    // Draw circles (outlines)

  testfillcircle();    // Draw circles (filled)

  testdrawroundrect(); // Draw rounded rectangles (outlines)

  testfillroundrect(); // Draw rounded rectangles (filled)

  testdrawtriangle();  // Draw triangles (outlines)

  testfilltriangle();  // Draw triangles (filled)

  testdrawchar();      // Draw characters of the default font

  testdrawstyles();    // Draw 'stylized' characters

  testscrolltext();    // Draw scrolling text

  testdrawbitmap();    // Draw a small bitmap image

  // Invert and restore display, pausing in-between

  display.invertDisplay(true);

  delay(1000);

  display.invertDisplay(false);

  delay(1000);

  testanimate(logo_bmp, LOGO_WIDTH, LOGO_HEIGHT); // Animate bitmaps

}

void loop() {

}

void testdrawline() {

  int16_t i;

  display.clearDisplay(); // Clear display buffer

  for(i=0; i<display.width(); i+=4) {

    display.drawLine(0, 0, i, display.height()-1, WHITE);

    display.display(); // Update screen with each newly-drawn line

    delay(1);

  }

  for(i=0; i<display.height(); i+=4) {

    display.drawLine(0, 0, display.width()-1, i, WHITE);

    display.display();

    delay(1);

  }

  delay(250);

  display.clearDisplay();

  for(i=0; i<display.width(); i+=4) {

    display.drawLine(0, display.height()-1, i, 0, WHITE);

    display.display();

    delay(1);

  }

  for(i=display.height()-1; i>=0; i-=4) {

    display.drawLine(0, display.height()-1, display.width()-1, i, WHITE);

    display.display();

    delay(1);

  }

  delay(250);

  display.clearDisplay();

  for(i=display.width()-1; i>=0; i-=4) {

    display.drawLine(display.width()-1, display.height()-1, i, 0, WHITE);

    display.display();

    delay(1);

  }

  for(i=display.height()-1; i>=0; i-=4) {

    display.drawLine(display.width()-1, display.height()-1, 0, i, WHITE);

    display.display();

    delay(1);

  }

  delay(250);

  display.clearDisplay();

  for(i=0; i<display.height(); i+=4) {

    display.drawLine(display.width()-1, 0, 0, i, WHITE);

    display.display();

    delay(1);

  }

  for(i=0; i<display.width(); i+=4) {

    display.drawLine(display.width()-1, 0, i, display.height()-1, WHITE);

    display.display();

    delay(1);

  }

  delay(2000); // Pause for 2 seconds

}

void testdrawrect(void) {

  display.clearDisplay();

  for(int16_t i=0; i<display.height()/2; i+=2) {

    display.drawRect(i, i, display.width()-2*i, display.height()-2*i, WHITE);

    display.display(); // Update screen with each newly-drawn rectangle

    delay(1);

  }

  delay(2000);

}

void testfillrect(void) {

  display.clearDisplay();

  for(int16_t i=0; i<display.height()/2; i+=3) {

    // The INVERSE color is used so rectangles alternate white/black

    display.fillRect(i, i, display.width()-i*2, display.height()-i*2, INVERSE);

    display.display(); // Update screen with each newly-drawn rectangle

    delay(1);

  }

  delay(2000);

}

void testdrawcircle(void) {

  display.clearDisplay();

  for(int16_t i=0; i<max(display.width(),display.height())/2; i+=2) {

    display.drawCircle(display.width()/2, display.height()/2, i, WHITE);

    display.display();

    delay(1);

  }

  delay(2000);

}

void testfillcircle(void) {

  display.clearDisplay();

  for(int16_t i=max(display.width(),display.height())/2; i>0; i-=3) {

    // The INVERSE color is used so circles alternate white/black

    display.fillCircle(display.width() / 2, display.height() / 2, i, INVERSE);

    display.display(); // Update screen with each newly-drawn circle

    delay(1);

  }

  delay(2000);

}

void testdrawroundrect(void) {

  display.clearDisplay();

  for(int16_t i=0; i<display.height()/2-2; i+=2) {

    display.drawRoundRect(i, i, display.width()-2*i, display.height()-2*i,

      display.height()/4, WHITE);

    display.display();

    delay(1);

  }

  delay(2000);

}

void testfillroundrect(void) {

  display.clearDisplay();

  for(int16_t i=0; i<display.height()/2-2; i+=2) {

    // The INVERSE color is used so round-rects alternate white/black

    display.fillRoundRect(i, i, display.width()-2*i, display.height()-2*i,

      display.height()/4, INVERSE);

    display.display();

    delay(1);

  }

  delay(2000);

}

void testdrawtriangle(void) {

  display.clearDisplay();

  for(int16_t i=0; i<max(display.width(),display.height())/2; i+=5) {

    display.drawTriangle(

      display.width()/2  , display.height()/2-i,

      display.width()/2-i, display.height()/2+i,

      display.width()/2+i, display.height()/2+i, WHITE);

    display.display();

    delay(1);

  }

  delay(2000);

}

void testfilltriangle(void) {

  display.clearDisplay();

  for(int16_t i=max(display.width(),display.height())/2; i>0; i-=5) {

    // The INVERSE color is used so triangles alternate white/black

    display.fillTriangle(

      display.width()/2  , display.height()/2-i,

      display.width()/2-i, display.height()/2+i,

      display.width()/2+i, display.height()/2+i, INVERSE);

    display.display();

    delay(1);

  }

  delay(2000);

}

void testdrawchar(void) {

  display.clearDisplay();

  display.setTextSize(1);      // Normal 1:1 pixel scale

  display.setTextColor(WHITE); // Draw white text

  display.setCursor(0, 0);     // Start at top-left corner

  display.cp437(true);         // Use full 256 char 'Code Page 437' font

  // Not all the characters will fit on the display. This is normal.

  // Library will draw what it can and the rest will be clipped.

  for(int16_t i=0; i<256; i++) {

    if(i == '\n') display.write(' ');

    else          display.write(i);

  }

  display.display();

  delay(2000);

}

void testdrawstyles(void) {

  display.clearDisplay();

  display.setTextSize(1);             // Normal 1:1 pixel scale

  display.setTextColor(WHITE);        // Draw white text

  display.setCursor(0,0);             // Start at top-left corner

  display.println(F("Hello, world!"));

  display.setTextColor(BLACK, WHITE); // Draw 'inverse' text

  display.println(3.141592);

  display.setTextSize(2);             // Draw 2X-scale text

  display.setTextColor(WHITE);

  display.print(F("0x")); display.println(0xDEADBEEF, HEX);

  display.display();

  delay(2000);

}

void testscrolltext(void) {

  display.clearDisplay();

  display.setTextSize(2); // Draw 2X-scale text

  display.setTextColor(WHITE);

  display.setCursor(10, 0);

  display.println(F("scroll"));

  display.display();      // Show initial text

  delay(100);

  // Scroll in various directions, pausing in-between:

  display.startscrollright(0x00, 0x0F);

  delay(2000);

  display.stopscroll();

  delay(1000);

  display.startscrollleft(0x00, 0x0F);

  delay(2000);

  display.stopscroll();

  delay(1000);

  display.startscrolldiagright(0x00, 0x07);

  delay(2000);

  display.startscrolldiagleft(0x00, 0x07);

  delay(2000);

  display.stopscroll();

  delay(1000);

}

void testdrawbitmap(void) {

  display.clearDisplay();

  display.drawBitmap(

    (display.width()  - LOGO_WIDTH ) / 2,

    (display.height() - LOGO_HEIGHT) / 2,

    logo_bmp, LOGO_WIDTH, LOGO_HEIGHT, 1);

  display.display();

  delay(1000);

}

#define XPOS   0 // Indexes into the 'icons' array in function below

#define YPOS   1

#define DELTAY 2

void testanimate(const uint8_t *bitmap, uint8_t w, uint8_t h) {

  int8_t f, icons[NUMFLAKES][3];

  // Initialize 'snowflake' positions

  for(f=0; f< NUMFLAKES; f++) {

    icons[f][XPOS]   = random(1 - LOGO_WIDTH, display.width());

    icons[f][YPOS]   = -LOGO_HEIGHT;

    icons[f][DELTAY] = random(1, 6);

    Serial.print(F("x: "));

    Serial.print(icons[f][XPOS], DEC);

    Serial.print(F(" y: "));

    Serial.print(icons[f][YPOS], DEC);

    Serial.print(F(" dy: "));

    Serial.println(icons[f][DELTAY], DEC);

  }

  for(;;) { // Loop forever...

    display.clearDisplay(); // Clear the display buffer

    // Draw each snowflake:

    for(f=0; f< NUMFLAKES; f++) {

      display.drawBitmap(icons[f][XPOS], icons[f][YPOS], bitmap, w, h, WHITE);

    }

    display.display(); // Show the display buffer on the screen

    delay(200);        // Pause for 1/10 second

    // Then update coordinates of each flake...

    for(f=0; f< NUMFLAKES; f++) {

      icons[f][YPOS] += icons[f][DELTAY];

      // If snowflake is off the bottom of the screen...

      if (icons[f][YPOS] >= display.height()) {

        // Reinitialize to a random position, just off the top

        icons[f][XPOS]   = random(1 - LOGO_WIDTH, display.width());

        icons[f][YPOS]   = -LOGO_HEIGHT;

        icons[f][DELTAY] = random(1, 6);

      }

    }

  }

}

　　

https://item.taobao

.com/item.htm?spm=a1z09.2.0.0.91172e8dcnKcE5&id=562158712128&_u=51qf7bf525e7