Raspberry Pi3 Lazarus 1.6.2 安装步骤如下:
安装环境：Raspbian Jessie, RPi3
1.安装subversion和unzip
Sudo Apt-get update
Sudo Apt-get install subversion unizp
2.获取和编译最新的FreePascal编译器
Sudo mkdir /usr/local/fpc
cd /usr/local/fpc
Sudo wget http://sourceforge.net/projects/freepascal/files/Linux/2.6.4/fpc-2.6.4.arm-linux.tar
Sudo tar xvf fpc-2.6.4.arm-linux.tar
cd fpc-2.6.4.arm-linux
Sudo ./install.sh
提示安装下列时，输入？后的内容
Install prefix (/usr or /usr/local)? /usr/local
Install textmode IDE(y/n)?y
Install FCL(y/n)?y
Install Packages(y/n)?y
Install Documentation (y/n)?y
Install Demo (y/n)?y
下载3.0.0 RC2 FPC：
cd /usr/local/fpc
sudo svn co http://svn.freepascal.org/svn/fpc/tags/release_3_0_0_rc2 source
cd source
编译FPC：
sudo make all OPT=-dFPC_ARMHF
sudo make install OPT=-dFPC_ARMHF PREFIX=/usr/local
sudo make install sourceinstall OPT=-dFPC_ARMHF PREFIX=/usr/local
cd /usr/local/lib/fpc
ls
你在 Terminal应看到最新版本的版本号:
2.6.4 3.0.0
用看到最新的版本号替换下面的3.0.0
sudo rm -f "/usr/local/bin/ppcarm"
sudo ln -sf "/usr/local/lib/fpc/3.0.0/ppcarm" "/usr/local/bin/ppcarm"
3.下载、编译及安装Lazarus
sudo apt-get update
sudo apt-get install libx11-dev libgdk-pixbuf2.0-dev libcairo2-dev lpango-1.0 libpangox-1.0-dev xorg-dev
sudo aptitude install libgtk2.0-dev libgdk-pixbuf2.0-dev libpango1.0-dev
sudo mkdir /usr/local/lazarus
cd /usr/local/lazarus
sudo svn co http://svn.freepascal.org/svn/lazarus/tags/lazarus_1_6_2 source
cd source
sudo make all OPT=-dFPC_ARMHF
sudo make install OPT=-dFPC_ARMHF PREFIX=/usr/local
sudo rm -rf /usr/local/lazarus --删除已安装的源文件
4.最后的设置：
经过长时间安装， Lazarus终于安装完成。
当你第一次启动Lazarus， 要求设置FPC sources，输入 /usr/local/fpc/source
编译后的程序运行情况：