1. 网络拓扑:

03_vlan & access & trunk 口(数通华为)-LMLPHP

2. SW1配置:

2.1 关闭设备调试信息:
<Huawei>undo terminal monitor
<Huawei>undo terminal debugging

2.2 进入系统模式:
<Huawei>system-view

2.3 重命名:
[Huawei]sysname SW1

2.4 创建两个vlan:
[SW1]vlan batch 10 20

2.5 GE0/0/1 口配置access口:
[SW1-GigabitEthernet0/0/1]port link-type access
[SW1-GigabitEthernet0/0/1]port default vlan 10

2.6 GE0/0/2 口配置access口:
[SW1-GigabitEthernet0/0/2]port link-type access
[SW1-GigabitEthernet0/0/2]port default vlan 20
查看配置:
[SW1-GigabitEthernet0/0/2]display this
#
interface GigabitEthernet0/0/2
 port link-type access
 port default vlan 20
#
return

2.7 GE0/0/24Trunk口配置:
[SW1-GigabitEthernet0/0/24]port link-type trunk
[SW1-GigabitEthernet0/0/24]port trunk allow-pass vlan 10 20

2.8 查看端口vlan配置

03_vlan &amp; access &amp; trunk 口(数通华为)-LMLPHP

2.9 SW1保存配置
<SW1>save

3. SW2配置:
与SW1做相同配置

4. 验证配置:

PC1:

03_vlan &amp; access &amp; trunk 口(数通华为)-LMLPHP

PC2:

03_vlan &amp; access &amp; trunk 口(数通华为)-LMLPHP

05-11 20:02