usrp_regs.hpp

#ifndef INCLUDED_USRP2_REGS_HPP
#define INCLUDED_USRP2_REGS_HPP ////////////////////////////////////////////////////////////////////////
// Define slave bases
////////////////////////////////////////////////////////////////////////
#define ROUTER_RAM_BASE 0x4000
#define SPI_BASE 0x5000
#define I2C_BASE 0x5400
#define GPIO_BASE 0x5800
#define READBACK_BASE 0x5C00
#define ETH_BASE 0x6000
#define SETTING_REGS_BASE 0x7000
#define PIC_BASE 0x8000
#define UART_BASE 0x8800
#define ATR_BASE 0x8C00 ////////////////////////////////////////////////////////////////////////
// Setting register offsets
////////////////////////////////////////////////////////////////////////
#define SR_MISC 0 // 7 regs
#define SR_USER_REGS 8 // 2
#define SR_TIME64 10 // 6
#define SR_BUF_POOL 16 // 4
#define SR_SPI_CORE 20 // 3
#define SR_RX_FRONT 24 // 5
#define SR_RX_CTRL0 32 // 9
#define SR_RX_DSP0 48 // 7
#define SR_RX_CTRL1 80 // 9
#define SR_RX_DSP1 96 // 7 #define SR_TX_FRONT 128 // ? #define SR_TX_CTRL 144 // 6
#define SR_TX_DSP 160 // 5 #define SR_GPIO 184
#define SR_UDP_SM 192 // 64 #define U2_REG_SR_ADDR(sr) (SETTING_REGS_BASE + (4 * (sr))) #define U2_REG_ROUTER_CTRL_PORTS U2_REG_SR_ADDR(SR_BUF_POOL) + 8 /////////////////////////////////////////////////
// SPI Slave Constants
////////////////////////////////////////////////
// Masks for controlling different peripherals
#define SPI_SS_AD9510 1
#define SPI_SS_AD9777 2
#define SPI_SS_RX_DAC 4
#define SPI_SS_RX_ADC 8
#define SPI_SS_RX_DB 16
#define SPI_SS_TX_DAC 32
#define SPI_SS_TX_ADC 64
#define SPI_SS_TX_DB 128
#define SPI_SS_ADS62P44 256 //for usrp2p /////////////////////////////////////////////////
// Misc Control
////////////////////////////////////////////////
#define U2_REG_MISC_CTRL_CLOCK U2_REG_SR_ADDR(0)
#define U2_REG_MISC_CTRL_SERDES U2_REG_SR_ADDR(1)
#define U2_REG_MISC_CTRL_ADC U2_REG_SR_ADDR(2)
#define U2_REG_MISC_CTRL_LEDS U2_REG_SR_ADDR(3)
#define U2_REG_MISC_CTRL_PHY U2_REG_SR_ADDR(4)
#define U2_REG_MISC_CTRL_DBG_MUX U2_REG_SR_ADDR(5)
#define U2_REG_MISC_CTRL_RAM_PAGE U2_REG_SR_ADDR(6)
#define U2_REG_MISC_CTRL_FLUSH_ICACHE U2_REG_SR_ADDR(7)
#define U2_REG_MISC_CTRL_LED_SRC U2_REG_SR_ADDR(8) #define U2_FLAG_MISC_CTRL_SERDES_ENABLE 8
#define U2_FLAG_MISC_CTRL_SERDES_PRBSEN 4
#define U2_FLAG_MISC_CTRL_SERDES_LOOPEN 2
#define U2_FLAG_MISC_CTRL_SERDES_RXEN 1 #define U2_FLAG_MISC_CTRL_ADC_ON 0x0F
#define U2_FLAG_MISC_CTRL_ADC_OFF 0x00 /////////////////////////////////////////////////
// Readback regs
////////////////////////////////////////////////
#define U2_REG_STATUS READBACK_BASE + 4*8
#define U2_REG_GPIO_RB READBACK_BASE + 4*9
#define U2_REG_TIME64_HI_RB_IMM READBACK_BASE + 4*10
#define U2_REG_TIME64_LO_RB_IMM READBACK_BASE + 4*11
#define U2_REG_COMPAT_NUM_RB READBACK_BASE + 4*12
#define U2_REG_IRQ_RB READBACK_BASE + 4*13
#define U2_REG_TIME64_HI_RB_PPS READBACK_BASE + 4*14
#define U2_REG_TIME64_LO_RB_PPS READBACK_BASE + 4*15 #endif
05-15 21:46