使用二进制安装K8S 多master节点高可用集群

kubeadm是官方提供的开源工具，是一个开源项目，用于快速搭建kubernetes集群，目前是比较方便和推荐使用的。kubeadm init 以及 kubeadm join 这两个命令可以快速创建 kubernetes 集群。Kubeadm初始化k8s，所有的组件都是以pod形式运行的，具备故障自恢复能力。

kubeadm是工具，可以快速搭建集群，也就是相当于用程序脚本帮我们装好了集群，属于自动部署，简化部署操作，自动部署屏蔽了很多细节，使得对各个模块感知很少，如果对k8s架构组件理解不深的话，遇到问题比较难排查。

kubeadm适合需要经常部署k8s，或者对自动化要求比较高的场景下使用。

二进制：在官网下载相关组件的二进制包，如果手动安装，对kubernetes理解也会更全面。

Kubeadm和二进制都适合生产环境，在生产环境运行都很稳定，具体如何选择，可以根据实际项目进行评估。

回顾下k8s多master节点架构：

使用二进制安装K8S 多master节点高可用集群-LMLPHP

1.初始化

1.1 配置静态IP

把虚拟机或者物理机配置成静态ip地址，这样机器重新启动后ip地址也不会发生改变。

以xianchaomaster1主机修改静态IP为例:

#修改/etc/sysconfig/network-scripts/ifcfg-ens33文件，变成如下：

TYPE=Ethernet

PROXY_METHOD=none

BROWSER_ONLY=no

BOOTPROTO=static

IPADDR=192.168.40.180

NETMASK=255.255.255.0

GATEWAY=192.168.40.2

DNS1=192.168.40.2

DEFROUTE=yes

IPV4_FAILURE_FATAL=no

IPV6INIT=yes

IPV6_AUTOCONF=yes

IPV6_DEFROUTE=yes

IPV6_FAILURE_FATAL=no

IPV6_ADDR_GEN_MODE=stable-privacy

NAME=ens33

DEVICE=ens33

ONBOOT=yes

#修改配置文件之后需要重启网络服务才能使配置生效，重启网络服务命令如下：

service network restart

注：/etc/sysconfig/network-scripts/ifcfg-ens33文件里的配置说明：

NAME=ens33 #网卡名字，跟DEVICE名字保持一致即可

DEVICE=ens33 #网卡设备名，大家ip addr可看到自己的这个网卡设备名，每个人的机器可能这个名字不一样，需要写自己的

BOOTPROTO=static #static表示静态ip地址

ONBOOT=yes #开机自启动网络，必须是yes

IPADDR=192.168.40.180 #ip地址，需要跟自己电脑所在网段一致

NETMASK=255.255.255.0 #子网掩码，需要跟自己电脑所在网段一致

GATEWAY=192.168.40.2 #网关，在自己电脑打开cmd，输入ipconfig /all可看到

DNS1=192.168.40.2 #DNS，在自己电脑打开cmd，输入ipconfig /all可看到

1.2 配置主机名

#配置主机名：

在192.168.40.180上执行如下：

hostnamectl set-hostname xianchaomaster1

在192.168.40.181上执行如下：

hostnamectl set-hostname xianchaomaster2

在192.168.40.182上执行如下：

hostnamectl set-hostname xianchaomaster3

在192.168.40.183上执行如下：

hostnamectl set-hostname xianchaonode1

1.3 配置hosts文件

#修改xianchaomaster1、xianchaomaster2、xianchaomaster3、xianchaonode1机器的/etc/hosts文件，增加如下四行：

192.168.40.180 xianchaomaster1

192.168.40.181 xianchaomaster2

192.168.40.182 xianchaomaster3

192.168.40.183 xianchaonode1

1.4 配置主机之间无密码登录，每台机器都按照如下操作

#生成ssh 密钥对

ssh-keygen -t rsa #一路回车，不输入密码

把本地的ssh公钥文件安装到远程主机对应的账户

ssh-copy-id -i .ssh/id_rsa.pub xianchaomaster1

ssh-copy-id -i .ssh/id_rsa.pub xianchaomaster2

ssh-copy-id -i .ssh/id_rsa.pub xianchaomaster3

ssh-copy-id -i .ssh/id_rsa.pub xianchaonode1

1.5 关闭firewalld防火墙，在xianchaomaster1、xianchaomaster2、xianchaomaster3、xianchaonode1上操作：

systemctl stop firewalld ; systemctl disable firewalld

1.6 关闭selinux，在xianchaomaster1、xianchaomaster2、xianchaomaster3、xianchaonode1上操作：

sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config

#修改selinux配置文件之后，重启机器，selinux配置才能永久生效

重启之后登录机器验证是否修改成功：

getenforce

#显示Disabled说明selinux已经关闭

1.7 关闭交换分区swap，在xianchaomaster1、xianchaomaster2、xianchaomaster3、xianchaonode1上操作：

#临时关闭

swapoff -a

#永久关闭：注释swap挂载，给swap这行开头加一下注释

vim /etc/fstab

#/dev/mapper/centos-swap swap swap defaults 0 0

#如果是克隆的虚拟机，需要删除UUID

1.8 修改内核参数，在xianchaomaster1、xianchaomaster2、xianchaomaster3、xianchaonode1上操作：

#加载br_netfilter模块

modprobe br_netfilter

#验证模块是否加载成功：

lsmod |grep br_netfilter

#修改内核参数

cat > /etc/sysctl.d/k8s.conf <<EOF

net.bridge.bridge-nf-call-ip6tables = 1

net.bridge.bridge-nf-call-iptables = 1

net.ipv4.ip_forward = 1

EOF

#使刚才修改的内核参数生效

sysctl -p /etc/sysctl.d/k8s.conf

问题1：sysctl是做什么的？

在运行时配置内核参数

-p 从指定的文件加载系统参数，如不指定即从/etc/sysctl.conf中加载

问题2：为什么要执行modprobe br_netfilter？

修改/etc/sysctl.d/k8s.conf文件，增加如下三行参数：

net.bridge.bridge-nf-call-ip6tables = 1

net.bridge.bridge-nf-call-iptables = 1

net.ipv4.ip_forward = 1

sysctl -p /etc/sysctl.d/k8s.conf出现报错：

sysctl: cannot stat /proc/sys/net/bridge/bridge-nf-call-ip6tables: No such file or directory

sysctl: cannot stat /proc/sys/net/bridge/bridge-nf-call-iptables: No such file or directory

解决方法：

modprobe br_netfilter

问题3：为什么开启net.bridge.bridge-nf-call-iptables内核参数？

在centos下安装docker，执行docker info出现如下警告：

WARNING: bridge-nf-call-iptables is disabled

WARNING: bridge-nf-call-ip6tables is disabled

解决办法：

vim /etc/sysctl.d/k8s.conf

net.bridge.bridge-nf-call-ip6tables = 1

net.bridge.bridge-nf-call-iptables = 1

问题4：为什么要开启net.ipv4.ip_forward = 1参数？

kubeadm初始化k8s如果报错：

就表示没有开启ip_forward，需要开启。

net.ipv4.ip_forward是数据包转发：

出于安全考虑，Linux系统默认是禁止数据包转发的。所谓转发即当主机拥有多于一块的网卡时，其中一块收到数据包，根据数据包的目的ip地址将数据包发往本机另一块网卡，该网卡根据路由表继续发送数据包。这通常是路由器所要实现的功能。

要让Linux系统具有路由转发功能，需要配置一个Linux的内核参数net.ipv4.ip_forward。这个参数指定了Linux系统当前对路由转发功能的支持情况；其值为0时表示禁止进行IP转发；如果是1,则说明IP转发功能已经打开。

1.9 配置阿里云repo源，在xianchaomaster1、xianchaomaster2、xianchaomaster3、xianchaonode1上操作：

在xianchaomaster1上操作：

安装rzsz命令

[root@xianchaomaster1]# yum install lrzsz -y

安装scp：

[root@xianchaomaster1]#yum install openssh-clients

#备份基础repo源

[root@xianchaomaster1 ~]# mkdir /root/repo.bak

[root@xianchaomaster1 ~]# cd /etc/yum.repos.d/

[root@xianchaomaster1]# mv * /root/repo.bak/

#下载阿里云的repo源

把CentOS-Base.repo文件上传到xianchaomaster1主机的/etc/yum.repos.d/目录下

在xianchaomaster2上操作：

安装rzsz命令

[root@xianchaomaster2]# yum install lrzsz -y

安装scp：

[root@xianchaomaster2]#yum install openssh-clients

#备份基础repo源

[root@xianchaomaster2 ~]# mkdir /root/repo.bak

[root@xianchaomaster2 ~]# cd /etc/yum.repos.d/

[root@xianchaomaster2]# mv * /root/repo.bak/

#下载阿里云的repo源

把CentOS-Base.repo文件上传到xianchaomaster2主机的/etc/yum.repos.d/目录下

在xianchaomaster3上操作：

安装rzsz命令

[root@xianchaomaster3]# yum install lrzsz -y

安装scp：

[root@xianchaomaster3]#yum install openssh-clients

#备份基础repo源

[root@xianchaomaster3 ~]# mkdir /root/repo.bak

[root@xianchaomaster3 ~]# cd /etc/yum.repos.d/

[root@xianchaomaster3]# mv * /root/repo.bak/

#下载阿里云的repo源

把CentOS-Base.repo文件上传到xianchaomaster3主机的/etc/yum.repos.d/目录下

在xianchaonode1上操作：

安装rzsz命令

[root@xianchaonode1]# yum install lrzsz -y

安装scp：

[root@xianchaonode1]#yum install openssh-clients

#备份基础repo源

[root@ xianchaonode1 ~]# mkdir /root/repo.bak

[root@ xianchaonode1 ~]# cd /etc/yum.repos.d/

[root@ xianchaonode1]# mv * /root/repo.bak/

#下载阿里云的repo源

把CentOS-Base.repo文件上传到xianchaonode1主机的/etc/yum.repos.d/目录下

#配置国内阿里云docker的repo源

[root@xianchaomaster1 ~]# yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

[root@xianchaomaster2 ~]# yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

[root@xianchaomaster3 ~]# yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

[root@xianchaonode1 ~]# yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

1.10 配置时间同步，在xianchaomaster1、xianchaomaster2、xianchaomaster3、xianchaonode1上操作：

#安装ntpdate命令，

#yum install ntpdate -y

#跟网络源做同步

ntpdate cn.pool.ntp.org

#把时间同步做成计划任务

crontab -e

* */1 * * * /usr/sbin/ntpdate cn.pool.ntp.org

#重启crond服务

service crond restart

1.11 安装iptables

如果用firewalld不习惯，可以安装iptables ，在xianchaomaster1、xianchaomaster2、xianchaomaster3、xianchaonode1上操作：

#安装iptables

yum install iptables-services -y

#禁用iptables

service iptables stop && systemctl disable iptables

#清空防火墙规则

iptables -F

1.12 开启ipvs

#不开启ipvs将会使用iptables进行数据包转发，但是效率低，所以官网推荐需要开通ipvs。

#把ipvs.modules上传到xianchaomaster1机器的/etc/sysconfig/modules/目录下

[root@xianchaomaster1# chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep ip_vs

ip_vs_ftp 13079 0

nf_nat 26583 1 ip_vs_ftp

ip_vs_sed 12519 0

ip_vs_nq 12516 0

ip_vs_sh 12688 0

ip_vs_dh 12688 0

[root@xianchaomaster1~]# scp /etc/sysconfig/modules/ipvs.modules xianchaonode1:/etc/sysconfig/modules/

[root@xianchaonode1]# chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep ip_vs

ip_vs_ftp 13079 0

nf_nat 26583 1 ip_vs_ftp

ip_vs_sed 12519 0

ip_vs_nq 12516 0

ip_vs_sh 12688 0

ip_vs_dh 12688 0

[root@xianchaomaster1~]# scp /etc/sysconfig/modules/ipvs.modules xianchaomaster2:/etc/sysconfig/modules/

[root@xianchaomaster2]# chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep ip_vs

ip_vs_ftp 13079 0

nf_nat 26583 1 ip_vs_ftp

ip_vs_sed 12519 0

ip_vs_nq 12516 0

ip_vs_sh 12688 0

ip_vs_dh 12688 0

[root@xianchaomaster1~]# scp /etc/sysconfig/modules/ipvs.modules xianchaomaster3:/etc/sysconfig/modules/

[root@xianchaomaster3]# chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep ip_vs

ip_vs_ftp 13079 0

nf_nat 26583 1 ip_vs_ftp

ip_vs_sed 12519 0

ip_vs_nq 12516 0

ip_vs_sh 12688 0

ip_vs_dh 12688 0

1.13 安装基础软件包，在xianchaomaster1、xianchaomaster2、xianchaomaster3、xianchaonode1上操作：

yum install -y yum-utils device-mapper-persistent-data lvm2 wget net-tools nfs-utils lrzsz gcc gcc-c++ make cmake libxml2-devel openssl-devel curl curl-devel unzip sudo ntp libaio-devel wget vim ncurses-devel autoconf automake zlib-devel python-devel epel-release openssh-server socat ipvsadm conntrack ntpdate telnet rsync

1.14 安装docker-ce，在xianchaomaster1、xianchaomaster2、xianchaomaster3、xianchaonode1上操作：

yum install docker-ce docker-ce-cli containerd.io -y

systemctl start docker && systemctl enable docker.service && systemctl status docker

1.15 配置docker镜像加速器，在xianchaomaster1、xianchaomaster2、xianchaomaster3、xianchaonode1上操作：

tee /etc/docker/daemon.json << 'EOF'

{

"registry-mirrors":["https://rsbud4vc.mirror.aliyuncs.com","https://registry.docker-cn.com","https://docker.mirrors.ustc.edu.cn","https://dockerhub.azk8s.cn","http://hub-mirror.c.163.com","http://qtid6917.mirror.aliyuncs.com", "https://rncxm540.mirror.aliyuncs.com"],

"exec-opts": ["native.cgroupdriver=systemd"]

}

EOF

systemctl daemon-reload

systemctl restart docker

systemctl status docker

Active: active (running) since Wed 2021-04-21 11:37:45 CST; 25s ago

#修改docker文件驱动为systemd，默认为cgroupfs，kubelet默认使用systemd，两者必须一致才可以。

2.搭建etcd集群

2.1 配置etcd工作目录

#创建配置文件和证书文件存放目录

[root@xianchaomaster1 ~]# mkdir -p /etc/etcd

[root@xianchaomaster1 ~]# mkdir -p /etc/etcd/ssl

[root@xianchaomaster2 ~]# mkdir -p /etc/etcd

[root@xianchaomaster2 ~]# mkdir -p /etc/etcd/ssl

[root@xianchaomaster3 ~]# mkdir -p /etc/etcd

[root@xianchaomaster3 ~]# mkdir -p /etc/etcd/ssl

2.2 安装签发证书工具cfssl

[root@xianchaomaster1 ~]# mkdir /data/work -p

[root@xianchaomaster1 ~]# cd /data/work/

#cfssl-certinfo_linux-amd64 、cfssljson_linux-amd64 、cfssl_linux-amd64上传到/data/work/目录下

[root@xianchaomaster1 work]# ls

cfssl-certinfo_linux-amd64 cfssljson_linux-amd64 cfssl_linux-amd64

#把文件变成可执行权限

[root@xianchaomaster1 work]# chmod +x *

[root@xianchaomaster1 work]# mv cfssl_linux-amd64 /usr/local/bin/cfssl

[root@xianchaomaster1 work]# mv cfssljson_linux-amd64 /usr/local/bin/cfssljson

[root@xianchaomaster1 work]# mv cfssl-certinfo_linux-amd64 /usr/local/bin/cfssl-certinfo

2.3 配置ca证书

#生成ca证书请求文件

[root@xianchaomaster1 work]# vim ca-csr.json

{

"CN": "kubernetes",

"key": {

"algo": "rsa",

"size": 2048

"names": [

{

"C": "CN",

"ST": "Hubei",

"L": "Wuhan",

"O": "k8s",

"OU": "system"

}

"ca": {

"expiry": "87600h"

}

[root@xianchaomaster1 work]#

使用二进制安装K8S 多master节点高可用集群-LMLPHP

注：

CN：Common Name（公用名称），kube-apiserver 从证书中提取该字段作为请求的用户名 (User Name)；浏览器使用该字段验证网站是否合法；对于 SSL 证书，一般为网站域名；而对于代码签名证书则为申请单位名称；而对于客户端证书则为证书申请者的姓名。

O：Organization（单位名称），kube-apiserver 从证书中提取该字段作为请求用户所属的组 (Group)；对于 SSL 证书，一般为网站域名；而对于代码签名证书则为申请单位名称；而对于客户端单位证书则为证书申请者所在单位名称。

L 字段：所在城市

S 字段：所在省份

C 字段：只能是国家字母缩写，如中国：CN

#生成ca证书文件

[root@xianchaomaster1 work]# vim ca-config.json

{

"signing": {

"default": {

"expiry": "87600h"

"profiles": {

"kubernetes": {

"usages": [

"signing",

"key encipherment",

"server auth",

"client auth"

"expiry": "87600h"

}

2.4 生成etcd证书

#配置etcd证书请求，hosts的ip变成自己etcd所在节点的ip

[root@xianchaomaster1 work]# vim etcd-csr.json

{

"CN": "etcd",

"hosts": [

"127.0.0.1",

"192.168.40.180",

"192.168.40.181",

"192.168.40.182",

"192.168.40.199"

"key": {

"algo": "rsa",

"size": 2048

"names": [{

"C": "CN",

"ST": "Hubei",

"L": "Wuhan",

"O": "k8s",

"OU": "system"

}]

}

#上述文件hosts字段中IP为所有etcd节点的集群内部通信IP，可以预留几个，做扩容用。

[root@xianchaomaster1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes etcd-csr.json | cfssljson -bare etcd

[root@xianchaomaster1 work]# ls etcd*.pem

etcd-key.pem etcd.pem

2.5 部署etcd集群

把etcd-v3.4.13-linux-amd64.tar.gz上传到/data/work目录下

[root@xianchaomaster1 work]# pwd

/data/work

[root@xianchaomaster1 work]# tar -xf etcd-v3.4.13-linux-amd64.tar.gz

[root@xianchaomaster1 work]# cp -p etcd-v3.4.13-linux-amd64/etcd* /usr/local/bin/

[root@xianchaomaster1 work]# scp -r etcd-v3.4.13-linux-amd64/etcd* xianchaomaster2:/usr/local/bin/

[root@xianchaomaster1 work]# scp -r etcd-v3.4.13-linux-amd64/etcd* xianchaomaster3:/usr/local/bin/

#创建配置文件

[root@xianchaomaster1 work]# vim etcd.conf

#[Member]

ETCD_NAME="etcd1"

ETCD_DATA_DIR="/var/lib/etcd/default.etcd"

ETCD_LISTEN_PEER_URLS="https://192.168.40.180:2380"

ETCD_LISTEN_CLIENT_URLS="https://192.168.40.180:2379,http://127.0.0.1:2379"

#[Clustering]

ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.40.180:2380"

ETCD_ADVERTISE_CLIENT_URLS="https://192.168.40.180:2379"

ETCD_INITIAL_CLUSTER="etcd1=https://192.168.40.180:2380,etcd2=https://192.168.40.181:2380,etcd3=https://192.168.40.182:2380"

ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"

ETCD_INITIAL_CLUSTER_STATE="new"

#注：

ETCD_NAME：节点名称，集群中唯一

ETCD_DATA_DIR：数据目录

ETCD_LISTEN_PEER_URLS：集群通信监听地址

ETCD_LISTEN_CLIENT_URLS：客户端访问监听地址

ETCD_INITIAL_ADVERTISE_PEER_URLS：集群通告地址

ETCD_ADVERTISE_CLIENT_URLS：客户端通告地址

ETCD_INITIAL_CLUSTER：集群节点地址

ETCD_INITIAL_CLUSTER_TOKEN：集群Token

ETCD_INITIAL_CLUSTER_STATE：加入集群的当前状态，new是新集群，existing表示加入已有集群

#创建启动服务文件

[root@xianchaomaster1 work]# vim etcd.service

[Unit]

Description=Etcd Server

After=network.target

After=network-online.target

Wants=network-online.target

[Service]

Type=notify

EnvironmentFile=-/etc/etcd/etcd.conf

WorkingDirectory=/var/lib/etcd/

ExecStart=/usr/local/bin/etcd \

--cert-file=/etc/etcd/ssl/etcd.pem \

--key-file=/etc/etcd/ssl/etcd-key.pem \

--trusted-ca-file=/etc/etcd/ssl/ca.pem \

--peer-cert-file=/etc/etcd/ssl/etcd.pem \

--peer-key-file=/etc/etcd/ssl/etcd-key.pem \

--peer-trusted-ca-file=/etc/etcd/ssl/ca.pem \

--peer-client-cert-auth \

--client-cert-auth

Restart=on-failure

RestartSec=5

LimitNOFILE=65536

[Install]

WantedBy=multi-user.target

[root@xianchaomaster1 work]# cp ca*.pem /etc/etcd/ssl/

[root@xianchaomaster1 work]# cp etcd*.pem /etc/etcd/ssl/

[root@xianchaomaster1 work]# cp etcd.conf /etc/etcd/

[root@xianchaomaster1 work]# cp etcd.service /usr/lib/systemd/system/

[root@xianchaomaster1 work]# for i in xianchaomaster2 xianchaomaster3;do rsync -vaz etcd.conf $i:/etc/etcd/;done

[root@xianchaomaster1 work]# for i in xianchaomaster2 xianchaomaster3;do rsync -vaz etcd*.pem ca*.pem $i:/etc/etcd/ssl/;done

[root@xianchaomaster1 work]# for i in xianchaomaster2 xianchaomaster3;do rsync -vaz etcd.service $i:/usr/lib/systemd/system/;done

#启动etcd集群

[root@xianchaomaster1 work]# mkdir -p /var/lib/etcd/default.etcd

[root@xianchaomaster2 work]# mkdir -p /var/lib/etcd/default.etcd

[root@xianchaomaster3 work]# mkdir -p /var/lib/etcd/default.etcd

[root@xianchaomaster2 ~]# vim /etc/etcd/etcd.conf

#[Member]

ETCD_NAME="etcd2"

ETCD_DATA_DIR="/var/lib/etcd/default.etcd"

ETCD_LISTEN_PEER_URLS="https://192.168.40.181:2380"

ETCD_LISTEN_CLIENT_URLS="https://192.168.40.181:2379,http://127.0.0.1:2379"

#[Clustering]

ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.40.181:2380"

ETCD_ADVERTISE_CLIENT_URLS="https://192.168.40.181:2379"

ETCD_INITIAL_CLUSTER="etcd1=https://192.168.40.180:2380,etcd2=https://192.168.40.181:2380,etcd3=https://192.168.40.182:2380"

ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"

ETCD_INITIAL_CLUSTER_STATE="new"

[root@xianchaomaster3 ~]# vim /etc/etcd/etcd.conf

#[Member]

ETCD_NAME="etcd3"

ETCD_DATA_DIR="/var/lib/etcd/default.etcd"

ETCD_LISTEN_PEER_URLS="https://192.168.40.182:2380"

ETCD_LISTEN_CLIENT_URLS="https://192.168.40.182:2379,http://127.0.0.1:2379"

#[Clustering]

ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.40.182:2380"

ETCD_ADVERTISE_CLIENT_URLS="https://192.168.40.182:2379"

ETCD_INITIAL_CLUSTER="etcd1=https://192.168.40.180:2380,etcd2=https://192.168.40.181:2380,etcd3=https://192.168.40.182:2380"

ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"

ETCD_INITIAL_CLUSTER_STATE="new"

[root@xianchaomaster1 work]# systemctl daemon-reload

[root@xianchaomaster1 work]# systemctl enable etcd.service

[root@xianchaomaster1 work]# systemctl start etcd.service

[root@xianchaomaster2 work]# systemctl daemon-reload

[root@xianchaomaster2 work]# systemctl enable etcd.service

[root@xianchaomaster2 work]# systemctl start etcd.service

启动etcd的时候，先启动xianchaomaster1的etcd服务，会一直卡住在启动的状态，然后接着再启动xianchaomaster2的etcd，这样xianchaomaster1这个节点etcd才会正常起来

[root@xianchaomaster3 work]# systemctl daemon-reload

[root@xianchaomaster3 work]# systemctl enable etcd.service

[root@xianchaomaster3 work]# systemctl start etcd.service

[root@xianchaomaster1]# systemctl status etcd

[root@xianchaomaster2]# systemctl status etcd

[root@xianchaomaster3]# systemctl status etcd

使用二进制安装K8S 多master节点高可用集群-LMLPHP

#查看etcd集群

[root@xianchaomaster1 work]# ETCDCTL_API=3

[root@xianchaomaster1 ~]# /usr/local/bin/etcdctl --write-out=table --cacert=/etc/etcd/ssl/ca.pem --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem --endpoints=https://192.168.40.180:2379,https://192.168.40.181:2379,https://192.168.40.182:2379 endpoint health

+----------------------------+--------+-------------+-------+

+----------------------------+--------+-------------+-------+

+----------------------------+--------+-------------+-------+ |

3.安装kubernetes组件

3.1 下载安装包

二进制包所在的github地址如下：

https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/

把kubernetes-server-linux-amd64.tar.gz上传到xianchaomaster1上的/data/work目录下:

[root@xianchaomaster1 work]# tar zxvf kubernetes-server-linux-amd64.tar.gz

[root@xianchaomaster1 work]# cd kubernetes/server/bin/

[root@xianchaomaster1 bin]# cp kube-apiserver kube-controller-manager kube-scheduler kubectl /usr/local/bin/

[root@xianchaomaster1 bin]# rsync -vaz kube-apiserver kube-controller-manager kube-scheduler kubectl xianchaomaster2:/usr/local/bin/

[root@xianchaomaster1 bin]# rsync -vaz kube-apiserver kube-controller-manager kube-scheduler kubectl xianchaomaster3:/usr/local/bin/

[root@xianchaomaster1 bin]# scp kubelet kube-proxy xianchaonode1:/usr/local/bin/

[root@xianchaomaster1 bin]# cd /data/work/

[root@xianchaomaster1 work]# mkdir -p /etc/kubernetes/

[root@xianchaomaster1 work]# mkdir -p /etc/kubernetes/ssl

[root@xianchaomaster1 work]# mkdir /var/log/kubernetes

3.2 部署apiserver组件

#启动TLS Bootstrapping 机制

Master apiserver启用TLS认证后，每个节点的 kubelet 组件都要使用由 apiserver 使用的 CA 签发的有效证书才能与 apiserver 通讯，当Node节点很多时，这种客户端证书颁发需要大量工作，同样也会增加集群扩展复杂度。

为了简化流程，Kubernetes引入了TLS bootstraping机制来自动颁发客户端证书，kubelet会以一个低权限用户自动向apiserver申请证书，kubelet的证书由apiserver动态签署。

Bootstrap 是很多系统中都存在的程序，比如 Linux 的bootstrap，bootstrap 一般都是作为预先配置在开启或者系统启动的时候加载，这可以用来生成一个指定环境。Kubernetes 的 kubelet 在启动时同样可以加载一个这样的配置文件，这个文件的内容类似如下形式：
apiVersion: v1

clusters: null

contexts:

- context:

cluster: kubernetes

user: kubelet-bootstrap

name: default

current-context: default

kind: Config

preferences: {}

users:

- name: kubelet-bootstrap

user: {}

#TLS bootstrapping 具体引导过程

1.TLS 作用
TLS 的作用就是对通讯加密，防止中间人窃听；同时如果证书不信任的话根本就无法与 apiserver 建立连接，更不用提有没有权限向apiserver请求指定内容。

2. RBAC 作用
当 TLS 解决了通讯问题后，那么权限问题就应由 RBAC 解决(可以使用其他权限模型，如 ABAC)；RBAC 中规定了一个用户或者用户组(subject)具有请求哪些 api 的权限；在配合 TLS 加密的时候，实际上 apiserver 读取客户端证书的 CN 字段作为用户名，读取 O字段作为用户组.

以上说明：第一，想要与 apiserver 通讯就必须采用由 apiserver CA 签发的证书，这样才能形成信任关系，建立 TLS 连接；第二，可以通过证书的 CN、O 字段来提供 RBAC 所需的用户与用户组。

#kubelet 首次启动流程
TLS bootstrapping 功能是让 kubelet 组件去 apiserver 申请证书，然后用于连接 apiserver；那么第一次启动时没有证书如何连接 apiserver ?

在apiserver 配置中指定了一个 token.csv 文件，该文件中是一个预设的用户配置；同时该用户的Token 和由apiserver 的 CA签发的用户被写入了 kubelet 所使用的 bootstrap.kubeconfig 配置文件中；这样在首次请求时，kubelet 使用 bootstrap.kubeconfig 中被 apiserver CA 签发证书时信任的用户来与 apiserver 建立 TLS 通讯，使用 bootstrap.kubeconfig 中的用户 Token 来向 apiserver 声明自己的 RBAC 授权身份.
token.csv格式:

3940fd7fbb391d1b4d861ad17a1f0613,kubelet-bootstrap,10001,"system:kubelet-bootstrap"

首次启动时，可能与遇到 kubelet 报 401 无权访问 apiserver 的错误；这是因为在默认情况下，kubelet 通过 bootstrap.kubeconfig 中的预设用户 Token 声明了自己的身份，然后创建 CSR 请求；但是不要忘记这个用户在我们不处理的情况下他没任何权限的，包括创建 CSR 请求；所以需要创建一个 ClusterRoleBinding，将预设用户 kubelet-bootstrap 与内置的 ClusterRole system:node-bootstrapper 绑定到一起，使其能够发起 CSR 请求。稍后安装kubelet的时候演示。

#创建token.csv文件

[root@xianchaomaster1 work]# cat > token.csv << EOF

$(head -c 16 /dev/urandom | od -An -t x | tr -d ' '),kubelet-bootstrap,10001,"system:kubelet-bootstrap"

EOF

#格式：token，用户名，UID，用户组

#创建csr请求文件，替换为自己机器的IP

[root@xianchaomaster1 work]# vim kube-apiserver-csr.json

{

"CN": "kubernetes",

"hosts": [

"127.0.0.1",

"192.168.40.180",

"192.168.40.181",

"192.168.40.182",

"192.168.40.183",

"192.168.40.199",

"10.255.0.1",

"kubernetes",

"kubernetes.default",

"kubernetes.default.svc",

"kubernetes.default.svc.cluster",

"kubernetes.default.svc.cluster.local"

"key": {

"algo": "rsa",

"size": 2048

"names": [

{

"C": "CN",

"ST": "Hubei",

"L": "Wuhan",

"O": "k8s",

"OU": "system"

}

]

}

#注：如果 hosts 字段不为空则需要指定授权使用该证书的 IP 或域名列表。由于该证书后续被 kubernetes master 集群使用，需要将master节点的IP都填上，同时还需要填写 service 网络的首个IP。(一般是 kube-apiserver 指定的 service-cluster-ip-range 网段的第一个IP，如 10.255.0.1)

#生成证书

[root@xianchaomaster1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-apiserver-csr.json | cfssljson -bare kube-apiserver

#创建api-server的配置文件，替换成自己的ip

[root@xianchaomaster1 work]# vim kube-apiserver.conf

KUBE_APISERVER_OPTS="--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \

--anonymous-auth=false \

--bind-address=192.168.40.180 \

--secure-port=6443 \

--advertise-address=192.168.40.180 \

--insecure-port=0 \

--authorization-mode=Node,RBAC \

--runtime-config=api/all=true \

--enable-bootstrap-token-auth \

--service-cluster-ip-range=10.255.0.0/16 \

--token-auth-file=/etc/kubernetes/token.csv \

--service-node-port-range=30000-50000 \

--tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem \

--tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \

--client-ca-file=/etc/kubernetes/ssl/ca.pem \

--kubelet-client-certificate=/etc/kubernetes/ssl/kube-apiserver.pem \

--kubelet-client-key=/etc/kubernetes/ssl/kube-apiserver-key.pem \

--service-account-key-file=/etc/kubernetes/ssl/ca-key.pem \

--service-account-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \

--service-account-issuer=https://kubernetes.default.svc.cluster.local \

--etcd-cafile=/etc/etcd/ssl/ca.pem \

--etcd-certfile=/etc/etcd/ssl/etcd.pem \

--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \

--etcd-servers=https://192.168.40.180:2379,https://192.168.40.181:2379,https://192.168.40.182:2379 \

--enable-swagger-ui=true \

--allow-privileged=true \

--apiserver-count=3 \

--audit-log-maxage=30 \

--audit-log-maxbackup=3 \

--audit-log-maxsize=100 \

--audit-log-path=/var/log/kube-apiserver-audit.log \

--event-ttl=1h \

--alsologtostderr=true \

--logtostderr=false \

--log-dir=/var/log/kubernetes \

--v=4"

#注：

--logtostderr：启用日志

--v：日志等级

--log-dir：日志目录

--etcd-servers：etcd集群地址

--bind-address：监听地址

--secure-port：https安全端口

--advertise-address：集群通告地址

--allow-privileged：启用授权

--service-cluster-ip-range：Service虚拟IP地址段

--enable-admission-plugins：准入控制模块

--authorization-mode：认证授权，启用RBAC授权和节点自管理

--enable-bootstrap-token-auth：启用TLS bootstrap机制

--token-auth-file：bootstrap token文件

--service-node-port-range：Service nodeport类型默认分配端口范围

--kubelet-client-xxx：apiserver访问kubelet客户端证书

--tls-xxx-file：apiserver https证书

--etcd-xxxfile：连接Etcd集群证书 –

-audit-log-xxx：审计日志

#创建服务启动文件

[root@xianchaomaster1 work]# vim kube-apiserver.service

[Unit]

Description=Kubernetes API Server

Documentation=https://github.com/kubernetes/kubernetes

After=etcd.service

Wants=etcd.service

[Service]

EnvironmentFile=-/etc/kubernetes/kube-apiserver.conf

ExecStart=/usr/local/bin/kube-apiserver $KUBE_APISERVER_OPTS

Restart=on-failure

RestartSec=5

Type=notify

LimitNOFILE=65536

[Install]

WantedBy=multi-user.target

[root@xianchaomaster1 work]# cp ca*.pem /etc/kubernetes/ssl

[root@xianchaomaster1 work]# cp kube-apiserver*.pem /etc/kubernetes/ssl/

[root@xianchaomaster1 work]# cp token.csv /etc/kubernetes/

[root@xianchaomaster1 work]# cp kube-apiserver.conf /etc/kubernetes/

[root@xianchaomaster1 work]# cp kube-apiserver.service /usr/lib/systemd/system/

[root@xianchaomaster1 work]# rsync -vaz token.csv xianchaomaster2:/etc/kubernetes/

[root@xianchaomaster1 work]# rsync -vaz token.csv xianchaomaster3:/etc/kubernetes/

[root@xianchaomaster1 work]# rsync -vaz kube-apiserver*.pem xianchaomaster2:/etc/kubernetes/ssl/

[root@xianchaomaster1 work]# rsync -vaz kube-apiserver*.pem xianchaomaster3:/etc/kubernetes/ssl/

[root@xianchaomaster1 work]# rsync -vaz ca*.pem xianchaomaster2:/etc/kubernetes/ssl/

[root@xianchaomaster1 work]# rsync -vaz ca*.pem xianchaomaster3:/etc/kubernetes/ssl/

[root@xianchaomaster1 work]# rsync -vaz kube-apiserver.conf xianchaomaster2:/etc/kubernetes/

[root@xianchaomaster1 work]# rsync -vaz kube-apiserver.conf xianchaomaster3:/etc/kubernetes/

[root@xianchaomaster1 work]# rsync -vaz kube-apiserver.service xianchaomaster2:/usr/lib/systemd/system/

[root@xianchaomaster1 work]# rsync -vaz kube-apiserver.service xianchaomaster3:/usr/lib/systemd/system/

注：xianchaomaster2和xianchaomaster3配置文件kube-apiserver.conf的IP地址修改为实际的本机IP

[root@xianchaomaster2 ~]# cat /etc/kubernetes/kube-apiserver.conf

KUBE_APISERVER_OPTS="--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \

--anonymous-auth=false \

--bind-address=192.168.40.181 \

--secure-port=6443 \

--advertise-address=192.168.40.181 \

--insecure-port=0 \

--authorization-mode=Node,RBAC \

--runtime-config=api/all=true \

--enable-bootstrap-token-auth \

--service-cluster-ip-range=10.255.0.0/16 \

--token-auth-file=/etc/kubernetes/token.csv \

--service-node-port-range=30000-50000 \

--tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem \

--tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \

--client-ca-file=/etc/kubernetes/ssl/ca.pem \

--kubelet-client-certificate=/etc/kubernetes/ssl/kube-apiserver.pem \

--kubelet-client-key=/etc/kubernetes/ssl/kube-apiserver-key.pem \

--service-account-key-file=/etc/kubernetes/ssl/ca-key.pem \

--service-account-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \

--service-account-issuer=https://kubernetes.default.svc.cluster.local \

--etcd-cafile=/etc/etcd/ssl/ca.pem \

--etcd-certfile=/etc/etcd/ssl/etcd.pem \

--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \

--etcd-servers=https://192.168.40.180:2379,https://192.168.40.181:2379,https://192.168.40.182:2379 \

--enable-swagger-ui=true \

--allow-privileged=true \

--apiserver-count=3 \

--audit-log-maxage=30 \

--audit-log-maxbackup=3 \

--audit-log-maxsize=100 \

--audit-log-path=/var/log/kube-apiserver-audit.log \

--event-ttl=1h \

--alsologtostderr=true \

--logtostderr=false \

--log-dir=/var/log/kubernetes \

--v=4"

[root@xianchaomaster3 ~]# cat /etc/kubernetes/kube-apiserver.conf

KUBE_APISERVER_OPTS="--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \

--anonymous-auth=false \

--bind-address=192.168.40.182 \

--secure-port=6443 \

--advertise-address=192.168.40.182 \

--insecure-port=0 \

--authorization-mode=Node,RBAC \

--runtime-config=api/all=true \

--enable-bootstrap-token-auth \

--service-cluster-ip-range=10.255.0.0/16 \

--token-auth-file=/etc/kubernetes/token.csv \

--service-node-port-range=30000-50000 \

--tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem \

--tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \

--client-ca-file=/etc/kubernetes/ssl/ca.pem \

--kubelet-client-certificate=/etc/kubernetes/ssl/kube-apiserver.pem \

--kubelet-client-key=/etc/kubernetes/ssl/kube-apiserver-key.pem \

--service-account-key-file=/etc/kubernetes/ssl/ca-key.pem \

--service-account-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \

--service-account-issuer=https://kubernetes.default.svc.cluster.local \

--etcd-cafile=/etc/etcd/ssl/ca.pem \

--etcd-certfile=/etc/etcd/ssl/etcd.pem \

--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \

--etcd-servers=https://192.168.40.180:2379,https://192.168.40.181:2379,https://192.168.40.182:2379 \

--enable-swagger-ui=true \

--allow-privileged=true \

--apiserver-count=3 \

--audit-log-maxage=30 \

--audit-log-maxbackup=3 \

--audit-log-maxsize=100 \

--audit-log-path=/var/log/kube-apiserver-audit.log \

--event-ttl=1h \

--alsologtostderr=true \

--logtostderr=false \

--log-dir=/var/log/kubernetes \

--v=4"

[root@xianchaomaster1 work]# systemctl daemon-reload

[root@xianchaomaster2 work]# systemctl daemon-reload

[root@xianchaomaster3 work]# systemctl daemon-reload

[root@xianchaomaster1 work]# systemctl enable kube-apiserver

[root@xianchaomaster2 work]# systemctl enable kube-apiserver

[root@xianchaomaster3 work]# systemctl enable kube-apiserver

[root@xianchaomaster1 work]# systemctl start kube-apiserver

[root@xianchaomaster2 work]# systemctl start kube-apiserver

[root@xianchaomaster3 work]# systemctl start kube-apiserver

[root@xianchaomaster1 work]# systemctl status kube-apiserver

Active: active (running) since Wed

[root@xianchaomaster2 work]# systemctl status kube-apiserver

Active: active (running) since Wed

[root@xianchaomaster3 work]# systemctl status kube-apiserver

Active: active (running) since Wed

[root@xianchaomaster1 work]# curl --insecure https://192.168.40.180:6443/

{

"kind": "Status",

"apiVersion": "v1",

"metadata": {

"status": "Failure",

"message": "Unauthorized",

"reason": "Unauthorized",

"code": 401

}

上面看到401，这个是正常的的状态，还没认证

3.3 部署kubectl组件

Kubectl是客户端工具，操作k8s资源的，如增删改查等。

Kubectl操作资源的时候，怎么知道连接到哪个集群，需要一个文件/etc/kubernetes/admin.conf，kubectl会根据这个文件的配置，去访问k8s资源。/etc/kubernetes/admin.con文件记录了访问的k8s集群，和用到的证书。

可以设置一个环境变量KUBECONFIG

[root@ xianchaomaster1 ~]# export KUBECONFIG =/etc/kubernetes/admin.conf

这样在操作kubectl，就会自动加载KUBECONFIG来操作要管理哪个集群的k8s资源了

也可以按照下面方法，这个是在kubeadm初始化k8s的时候会告诉我们要用的一个方法

[root@ xianchaomaster1 ~]# cp /etc/kubernetes/admin.conf /root/.kube/config

这样我们在执行kubectl，就会加载/root/.kube/config文件，去操作k8s资源了

如果设置了KUBECONFIG，那就会先找到KUBECONFIG去操作k8s，如果没有KUBECONFIG变量，那就会使用/root/.kube/config文件决定管理哪个k8s集群的资源

#创建csr请求文件

[root@xianchaomaster1 work]# vim admin-csr.json

{

"CN": "admin",

"hosts": [],

"key": {

"algo": "rsa",

"size": 2048

"names": [

{

"C": "CN",

"ST": "Hubei",

"L": "Wuhan",

"O": "system:masters",

"OU": "system"

}

]

}

#说明：后续 kube-apiserver 使用 RBAC 对客户端(如 kubelet、kube-proxy、Pod)请求进行授权； kube-apiserver 预定义了一些 RBAC 使用的 RoleBindings，如 cluster-admin 将 Group system:masters 与 Role cluster-admin 绑定，该 Role 授予了调用kube-apiserver 的所有 API的权限； O指定该证书的 Group 为 system:masters，kubelet 使用该证书访问 kube-apiserver 时，由于证书被 CA 签名，所以认证通过，同时由于证书用户组为经过预授权的 system:masters，所以被授予访问所有 API 的权限；

注：这个admin 证书，是将来生成管理员用的kube config 配置文件用的，现在我们一般建议使用RBAC 来对kubernetes 进行角色权限控制， kubernetes 将证书中的CN 字段作为User， O 字段作为 Group； "O": "system:masters", 必须是system:masters，否则后面kubectl create clusterrolebinding报错。

#证书O配置为system:masters 在集群内部cluster-admin的clusterrolebinding将system:masters组和cluster-admin clusterrole绑定在一起

#生成证书

[root@xianchaomaster1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin

[root@xianchaomaster1 work]# cp admin*.pem /etc/kubernetes/ssl/

配置安全上下文

#创建kubeconfig配置文件，比较重要

kubeconfig 为 kubectl 的配置文件，包含访问 apiserver 的所有信息，如 apiserver 地址、CA 证书和自身使用的证书（这里如果报错找不到kubeconfig路径，请手动复制到相应路径下，没有则忽略）

1.设置集群参数

[root@xianchaomaster1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.40.180:6443 --kubeconfig=kube.config

#查看kube.config内容

vim kube.config

apiVersion: v1

clusters:

- cluster:

certificate-authority-data: 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

server: https://192.168.40.180:6443

name: kubernetes

contexts: null

current-context: ""

kind: Config

preferences: {}

users: null

2.设置客户端认证参数

[root@xianchaomaster1 work]#

3.设置上下文参数

[root@xianchaomaster1 work]# kubectl config set-context kubernetes --cluster=kubernetes --user=admin --kubeconfig=kube.config

4.设置当前上下文

[root@xianchaomaster1 work]# kubectl config use-context kubernetes --kubeconfig=kube.config

[root@xianchaomaster1 work]# mkdir ~/.kube -p

[root@xianchaomaster1 work]# cp kube.config ~/.kube/config

5.授权kubernetes证书访问kubelet api权限

[root@xianchaomaster1 work]# kubectl create clusterrolebinding kube-apiserver:kubelet-apis --clusterrole=system:kubelet-api-admin --user kubernetes

#查看集群组件状态

[root@xianchaomaster1 work]# kubectl cluster-info

Kubernetes control plane is running at https://192.168.40.180:6443

[root@xianchaomaster1 work]# kubectl get componentstatuses

Warning: v1 ComponentStatus is deprecated in v1.19+

NAME STATUS MESSAGE ERROR

controller-manager Unhealthy Get "http://127.0.0.1:10252/healthz": dial tcp 127.0.0.1:10252: connect: connection refused

scheduler Unhealthy Get "http://127.0.0.1:10251/healthz": dial tcp 127.0.0.1:10251: connect: connection refused

etcd-0 Healthy {"health":"true"}

etcd-2 Healthy {"health":"true"}

etcd-1 Healthy {"health":"true"}

[root@xianchaomaster1 work]# kubectl get all --all-namespaces

NAMESPACE NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE

default service/kubernetes ClusterIP 10.255.0.1 <none> 443/TCP

#同步kubectl文件到其他节点

[root@xianchaomaster2 ~]# mkdir /root/.kube/

[root@xianchaomaster3 ~]# mkdir /root/.kube/

[root@xianchaomaster1 work]# rsync -vaz /root/.kube/config xianchaomaster2:/root/.kube/

[root@xianchaomaster1 work]# rsync -vaz /root/.kube/config xianchaomaster3:/root/.kube/

#配置kubectl子命令补全

[root@xianchaomaster1 work]# yum install -y bash-completion

[root@xianchaomaster1 work]# source /usr/share/bash-completion/bash_completion

[root@xianchaomaster1 work]# source <(kubectl completion bash)

[root@xianchaomaster1 work]# kubectl completion bash > ~/.kube/completion.bash.inc

[root@xianchaomaster1 work]# source '/root/.kube/completion.bash.inc'

[root@xianchaomaster1 work]# source $HOME/.bash_profile

Kubectl官方备忘单：

https://kubernetes.io/zh/docs/reference/kubectl/cheatsheet/

3.4 部署kube-controller-manager组件

#创建csr请求文件

[root@xianchaomaster1 work]# vim kube-controller-manager-csr.json

{

"CN": "system:kube-controller-manager",

"key": {

"algo": "rsa",

"size": 2048

"hosts": [

"127.0.0.1",

"192.168.40.180",

"192.168.40.181",

"192.168.40.182",

"192.168.40.199"

"names": [

{

"C": "CN",

"ST": "Hubei",

"L": "Wuhan",

"O": "system:kube-controller-manager",

"OU": "system"

}

]

}

注： hosts 列表包含所有 kube-controller-manager 节点 IP； CN 为 system:kube-controller-manager、O 为 system:kube-controller-manager，kubernetes 内置的 ClusterRoleBindings system:kube-controller-manager 赋予 kube-controller-manager 工作所需的权限

#生成证书

[root@xianchaomaster1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager

#创建kube-controller-manager的kubeconfig

1.设置集群参数

[root@xianchaomaster1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.40.180:6443 --kubeconfig=kube-controller-manager.kubeconfig

2.设置客户端认证参数

[root@xianchaomaster1 work]# kubectl config set-credentials system:kube-controller-manager --client-certificate=kube-controller-manager.pem --client-key=kube-controller-manager-key.pem --embed-certs=true --kubeconfig=kube-controller-manager.kubeconfig

3.设置上下文参数

[root@xianchaomaster1 work]# kubectl config set-context system:kube-controller-manager --cluster=kubernetes --user=system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig

4.设置当前上下文

[root@xianchaomaster1 work]# kubectl config use-context system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig

#创建配置文件kube-controller-manager.conf

[root@xianchaomaster1 work]# vim kube-controller-manager.conf

KUBE_CONTROLLER_MANAGER_OPTS="--port=0 \

--secure-port=10252 \

--bind-address=127.0.0.1 \

--kubeconfig=/etc/kubernetes/kube-controller-manager.kubeconfig \

--service-cluster-ip-range=10.255.0.0/16 \

--cluster-name=kubernetes \

--cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem \

--cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \

--allocate-node-cidrs=true \

--cluster-cidr=10.0.0.0/16 \

--experimental-cluster-signing-duration=87600h \

--root-ca-file=/etc/kubernetes/ssl/ca.pem \

--service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem \

--leader-elect=true \

--feature-gates=RotateKubeletServerCertificate=true \

--controllers=*,bootstrapsigner,tokencleaner \

--horizontal-pod-autoscaler-use-rest-clients=true \

--horizontal-pod-autoscaler-sync-period=10s \

--tls-cert-file=/etc/kubernetes/ssl/kube-controller-manager.pem \

--tls-private-key-file=/etc/kubernetes/ssl/kube-controller-manager-key.pem \

--use-service-account-credentials=true \

--alsologtostderr=true \

--logtostderr=false \

--log-dir=/var/log/kubernetes \

--v=2"

#创建启动文件

[root@xianchaomaster1 work]# vim kube-controller-manager.service

[Unit]

Description=Kubernetes Controller Manager

Documentation=https://github.com/kubernetes/kubernetes

[Service]

EnvironmentFile=-/etc/kubernetes/kube-controller-manager.conf

ExecStart=/usr/local/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS

Restart=on-failure

RestartSec=5

[Install]

WantedBy=multi-user.target

[root@xianchaomaster1 work]# cp kube-controller-manager*.pem /etc/kubernetes/ssl/

[root@xianchaomaster1 work]# cp kube-controller-manager.kubeconfig /etc/kubernetes/

[root@xianchaomaster1 work]# cp kube-controller-manager.conf /etc/kubernetes/

[root@xianchaomaster1 work]# cp kube-controller-manager.service /usr/lib/systemd/system/

[root@xianchaomaster1 work]# rsync -vaz kube-controller-manager*.pem xianchaomaster2:/etc/kubernetes/ssl/

[root@xianchaomaster1 work]# rsync -vaz kube-controller-manager*.pem xianchaomaster3:/etc/kubernetes/ssl/

[root@xianchaomaster1 work]# rsync -vaz kube-controller-manager.kubeconfig kube-controller-manager.conf xianchaomaster2:/etc/kubernetes/

[root@xianchaomaster1 work]# rsync -vaz kube-controller-manager.kubeconfig kube-controller-manager.conf xianchaomaster3:/etc/kubernetes/

[root@xianchaomaster1 work]# rsync -vaz kube-controller-manager.service xianchaomaster2:/usr/lib/systemd/system/

[root@xianchaomaster1 work]# rsync -vaz kube-controller-manager.service xianchaomaster3:/usr/lib/systemd/system/

[root@xianchaomaster1 work]# systemctl daemon-reload

[root@xianchaomaster1 work]# systemctl enable kube-controller-manager

[root@xianchaomaster1 work]# systemctl start kube-controller-manager

[root@xianchaomaster1 work]# systemctl status kube-controller-manager

Active: active (running) since

[root@xianchaomaster2]# systemctl daemon-reload

[root@xianchaomaster2]# systemctl enable kube-controller-manager

[root@xianchaomaster2]# systemctl start kube-controller-manager

[root@xianchaomaster2]# systemctl status kube-controller-manager

Active: active (running) since

[root@xianchaomaster3]# systemctl daemon-reload

[root@xianchaomaster3]# systemctl enable kube-controller-manager

[root@xianchaomaster3]# systemctl start kube-controller-manager

[root@xianchaomaster3]# systemctl status kube-controller-manager

Active: active (running) since

3.5 部署kube-scheduler组件

#创建csr请求

[root@xianchaomaster1 work]# vim kube-scheduler-csr.json

{

"CN": "system:kube-scheduler",

"hosts": [

"127.0.0.1",

"192.168.40.180",

"192.168.40.181",

"192.168.40.182",

"192.168.40.199"

"key": {

"algo": "rsa",

"size": 2048

"names": [

{

"C": "CN",

"ST": "Hubei",

"L": "Wuhan",

"O": "system:kube-scheduler",

"OU": "system"

}

]

}

注： hosts 列表包含所有 kube-scheduler 节点 IP； CN 为 system:kube-scheduler、O 为 system:kube-scheduler，kubernetes 内置的 ClusterRoleBindings system:kube-scheduler 将赋予 kube-scheduler 工作所需的权限。

#生成证书

[root@xianchaomaster1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler

#创建kube-scheduler的kubeconfig

1.设置集群参数

[root@xianchaomaster1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.40.180:6443 --kubeconfig=kube-scheduler.kubeconfig

2.设置客户端认证参数

[root@xianchaomaster1 work]# kubectl config set-credentials system:kube-scheduler --client-certificate=kube-scheduler.pem --client-key=kube-scheduler-key.pem --embed-certs=true --kubeconfig=kube-scheduler.kubeconfig

3.设置上下文参数

[root@xianchaomaster1 work]# kubectl config set-context system:kube-scheduler --cluster=kubernetes --user=system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig

4.设置当前上下文

[root@xianchaomaster1 work]# kubectl config use-context system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig

#创建配置文件kube-scheduler.conf

[root@xianchaomaster1 work]# vim kube-scheduler.conf

KUBE_SCHEDULER_OPTS="--address=127.0.0.1 \

--kubeconfig=/etc/kubernetes/kube-scheduler.kubeconfig \

--leader-elect=true \

--alsologtostderr=true \

--logtostderr=false \

--log-dir=/var/log/kubernetes \

--v=2"

#创建服务启动文件

[root@xianchaomaster1 work]# vim kube-scheduler.service

[Unit]

Description=Kubernetes Scheduler

Documentation=https://github.com/kubernetes/kubernetes

[Service]

EnvironmentFile=-/etc/kubernetes/kube-scheduler.conf

ExecStart=/usr/local/bin/kube-scheduler $KUBE_SCHEDULER_OPTS

Restart=on-failure

RestartSec=5

[Install]

WantedBy=multi-user.target

#启动服务

[root@xianchaomaster1 work]# cp kube-scheduler*.pem /etc/kubernetes/ssl/

[root@xianchaomaster1 work]# cp kube-scheduler.kubeconfig /etc/kubernetes/

[root@xianchaomaster1 work]# cp kube-scheduler.conf /etc/kubernetes/

[root@xianchaomaster1 work]# cp kube-scheduler.service /usr/lib/systemd/system/

[root@xianchaomaster1 work]# rsync -vaz kube-scheduler*.pem xianchaomaster2:/etc/kubernetes/ssl/

[root@xianchaomaster1 work]# rsync -vaz kube-scheduler*.pem xianchaomaster3:/etc/kubernetes/ssl/

[root@xianchaomaster1 work]# rsync -vaz kube-scheduler.kubeconfig kube-scheduler.conf xianchaomaster2:/etc/kubernetes/

[root@xianchaomaster1 work]# rsync -vaz kube-scheduler.kubeconfig kube-scheduler.conf xianchaomaster3:/etc/kubernetes/

[root@xianchaomaster1 work]# rsync -vaz kube-scheduler.service xianchaomaster2:/usr/lib/systemd/system/

[root@xianchaomaster1 work]# rsync -vaz kube-scheduler.service xianchaomaster3:/usr/lib/systemd/system/

[root@xianchaomaster1 work]# systemctl daemon-reload

[root@xianchaomaster1 work]# systemctl enable kube-scheduler

[root@xianchaomaster1 work]# systemctl start kube-scheduler

[root@xianchaomaster1 work]# systemctl status kube-scheduler

● kube-scheduler.service - Kubernetes Scheduler

Active: active (running) since Wed

[root@xianchaomaster2]# systemctl daemon-reload

[root@xianchaomaster2]# systemctl enable kube-scheduler

[root@xianchaomaster2]# systemctl start kube-scheduler

[root@xianchaomaster2]# systemctl status kube-scheduler

● kube-scheduler.service - Kubernetes Scheduler

Active: active (running) since Wed

[root@xianchaomaster3]# systemctl daemon-reload

[root@xianchaomaster3]# systemctl enable kube-scheduler

[root@xianchaomaster3]# systemctl start kube-scheduler

[root@xianchaomaster3]# systemctl status kube-scheduler

● kube-scheduler.service - Kubernetes Scheduler

Active: active (running) since Wed

3.6 导入离线镜像压缩包

#把pause-cordns.tar.gz上传到xianchaonode1节点，手动解压

[root@xianchaonode1 ~]# docker load -i pause-cordns.tar.gz

3.7 部署kubelet组件

kubelet：每个Node节点上的kubelet定期就会调用API Server的REST接口报告自身状态，API Server接收这些信息后，将节点状态信息更新到etcd中。kubelet也通过API Server监听Pod信息，从而对Node机器上的POD进行管理，如创建、删除、更新Pod

以下操作在xianchaomaster1上操作

创建kubelet-bootstrap.kubeconfig

[root@xianchaomaster1 work]# cd /data/work/

[root@xianchaomaster1 work]# BOOTSTRAP_TOKEN=$(awk -F "," '{print $1}' /etc/kubernetes/token.csv)

[root@xianchaomaster1 work]# rm -r kubelet-bootstrap.kubeconfig

[root@xianchaomaster1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.40.180:6443 --kubeconfig=kubelet-bootstrap.kubeconfig

[root@xianchaomaster1 work]#

[

[root@xianchaomaster1 work]# kubectl config use-context default --kubeconfig=kubelet-bootstrap.kubeconfig

[root@xianchaomaster1 work]# kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap

#创建配置文件kubelet.json

"cgroupDriver": "systemd"要和docker的驱动一致。

address替换为自己xianchaonode1的IP地址。

[root@xianchaomaster1 work]# vim kubelet.json

{

"kind": "KubeletConfiguration",

"apiVersion": "kubelet.config.k8s.io/v1beta1",

"authentication": {

"x509": {

"clientCAFile": "/etc/kubernetes/ssl/ca.pem"

"webhook": {

"enabled": true,

"cacheTTL": "2m0s"

"anonymous": {

"enabled": false

}

"authorization": {

"mode": "Webhook",

"webhook": {

"cacheAuthorizedTTL": "5m0s",

"cacheUnauthorizedTTL": "30s"

}

"address": "192.168.40.183",

"port": 10250,

"readOnlyPort": 10255,

"cgroupDriver": "systemd",

"hairpinMode": "promiscuous-bridge",

"serializeImagePulls": false,

"featureGates": {

"RotateKubeletClientCertificate": true,

"RotateKubeletServerCertificate": true

"clusterDomain": "cluster.local.",

"clusterDNS": ["10.255.0.2"]

}

[root@xianchaomaster1 work]# vim kubelet.service

[Unit]

Description=Kubernetes Kubelet

Documentation=https://github.com/kubernetes/kubernetes

After=docker.service

Requires=docker.service

[Service]

WorkingDirectory=/var/lib/kubelet

ExecStart=/usr/local/bin/kubelet \

--bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.kubeconfig \

--cert-dir=/etc/kubernetes/ssl \

--kubeconfig=/etc/kubernetes/kubelet.kubeconfig \

--config=/etc/kubernetes/kubelet.json \

--network-plugin=cni \

--pod-infra-container-image=k8s.gcr.io/pause:3.2 \

--alsologtostderr=true \

--logtostderr=false \

--log-dir=/var/log/kubernetes \

--v=2

Restart=on-failure

RestartSec=5

[Install]

WantedBy=multi-user.target

#注： –hostname-override：显示名称，集群中唯一

–network-plugin：启用CNI

–kubeconfig：空路径，会自动生成，后面用于连接apiserver

–bootstrap-kubeconfig：首次启动向apiserver申请证书

–config：配置参数文件

–cert-dir：kubelet证书生成目录

–pod-infra-container-image：管理Pod网络容器的镜像

#注：kubelete.json配置文件address改为各个节点的ip地址，在各个work节点上启动服务

[root@xianchaonode1 ~]# mkdir /etc/kubernetes/ssl -p

[root@xianchaomaster1 work]# scp kubelet-bootstrap.kubeconfig kubelet.json xianchaonode1:/etc/kubernetes/

[root@xianchaomaster1 work]# scp ca.pem xianchaonode1:/etc/kubernetes/ssl/

[root@xianchaomaster1 work]# scp kubelet.service xianchaonode1:/usr/lib/systemd/system/

#启动kubelet服务

[root@xianchaonode1 ~]# mkdir /var/lib/kubelet

[root@xianchaonode1 ~]# mkdir /var/log/kubernetes

[root@xianchaonode1 ~]#

[root@xianchaonode1 ~]# systemctl enable kubelet

[root@xianchaonode1 ~]# systemctl start kubelet

[root@xianchaonode1 ~]# systemctl status kubelet

Active: active (running) since

确认kubelet服务启动成功后Approve一下bootstrap请求。

[əˈpruːv]：批准

执行如下命令可以看到一个worker节点发送了一个 CSR 请求：

[root@xianchaomaster1 work]# kubectl get csr

NAME AGE SIGNERNAME REQUESTOR CONDITION

node-csr-SY6gROGEmH0qVZhMVhJKKWN3UaWkKKQzV8dopoIO9Uc 87s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap Pending

[root@xianchaomaster1 work]# kubectl certificate approve node-csr-SY6gROGEmH0qVZhMVhJKKWN3UaWkKKQzV8dopoIO9Uc

[root@xianchaomaster1 work]# kubectl get csr

NAME AGE SIGNERNAME REQUESTOR CONDITION

node-csr-SY6gROGEmH0qVZhMVhJKKWN3UaWkKKQzV8dopoIO9Uc 2m25s kubernetes.io/kube-apiserver-client-kubelet kubelet-bootstrap Approved,Issued

[root@xianchaomaster1 work]# kubectl get nodes

NAME STATUS ROLES AGE VERSION

xianchaonode1 NotReady <none> 30s v1.20.7

#注意：STATUS是NotReady表示还没有安装网络插件

3.8 部署kube-proxy组件

#创建csr请求

[root@xianchaomaster1 work]# vim kube-proxy-csr.json

{

"CN": "system:kube-proxy",

"key": {

"algo": "rsa",

"size": 2048

"names": [

{

"C": "CN",

"ST": "Hubei",

"L": "Wuhan",

"O": "k8s",

"OU": "system"

}

]

}

生成证书

[root@xianchaomaster1 work]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy

#创建kubeconfig文件

[root@xianchaomaster1 work]# kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.40.180:6443 --kubeconfig=kube-proxy.kubeconfig

[root@xianchaomaster1 work]# kubectl config set-credentials kube-proxy --client-certificate=kube-proxy.pem --client-key=kube-proxy-key.pem --embed-certs=true --kubeconfig=kube-proxy.kubeconfig

[root@xianchaomaster1 work]# kubectl config set-context default --cluster=kubernetes --user=kube-proxy --kubeconfig=kube-proxy.kubeconfig

[root@xianchaomaster1 work]# kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig

#创建kube-proxy配置文件

[root@xianchaomaster1 work]# vim kube-proxy.yaml

apiVersion: kubeproxy.config.k8s.io/v1alpha1

bindAddress: 192.168.40.183

clientConnection:

kubeconfig: /etc/kubernetes/kube-proxy.kubeconfig

clusterCIDR: 192.168.40.0/24

healthzBindAddress: 192.168.40.183:10256

kind: KubeProxyConfiguration

metricsBindAddress: 192.168.40.183:10249

mode: "ipvs"

#创建服务启动文件

[root@xianchaomaster1 work]# vim kube-proxy.service

[Unit]

Description=Kubernetes Kube-Proxy Server

Documentation=https://github.com/kubernetes/kubernetes

After=network.target

[Service]

WorkingDirectory=/var/lib/kube-proxy

ExecStart=/usr/local/bin/kube-proxy \

--config=/etc/kubernetes/kube-proxy.yaml \

--alsologtostderr=true \

--logtostderr=false \

--log-dir=/var/log/kubernetes \

--v=2

Restart=on-failure

RestartSec=5

LimitNOFILE=65536

[Install]

WantedBy=multi-user.target

[root@xianchaomaster1 work]# scp kube-proxy.kubeconfig kube-proxy.yaml xianchaonode1:/etc/kubernetes/

[root@xianchaomaster1 work]#scp kube-proxy.service xianchaonode1:/usr/lib/systemd/system/

#启动服务

[root@xianchaonode1 ~]# mkdir -p /var/lib/kube-proxy

[root@xianchaonode1 ~]# systemctl daemon-reload

[root@xianchaonode1 ~]# systemctl enable kube-proxy

[root@xianchaonode1 ~]#

[root@xianchaonode1 ~]# systemctl status kube-proxy

Active: active (running) since Wed

3.9 部署calico组件

#解压离线镜像压缩包

#把calico.tar.gz上传到xianchaonode1节点，手动解压

[root@xianchaonode1 ~]# docker load -i calico.tar.gz

#把calico.yaml文件上传到xianchaomaster1上的的/data/work目录

[root@xianchaomaster1 work]# kubectl apply -f calico.yaml

[root@xianchaomaster1 ~]# kubectl get pods -n kube-system

calico-kube-controllers-6949477b58-qvn5b 1/1 Running 0 2m17s

calico-node-lv6w4 1/1 Running 0 2m18s

[root@xianchaomaster1 ~]# kubectl get nodes

NAME STATUS ROLES AGE VERSION

xianchaonode1 Ready <none> 73m v1.20.7

3.10 部署coredns组件

[root@xianchaomaster1 ~]# kubectl apply -f coredns.yaml

[root@xianchaomaster1 ~]# kubectl get pods -n kube-system

NAME READY STATUS RESTARTS AGE

calico-kube-controllers-6949477b58-qvn5b 1/1 Running 0 2m17s

calico-node-lv6w4 1/1 Running 0 2m18s

coredns-7bf4bd64bd-dt8dq 1/1 Running 0 51s

[root@xianchaomaster1 ~]# kubectl get svc -n kube-system

NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE

kube-dns ClusterIP 10.255.0.2 <none> 53/UDP,53/TCP,9153/TCP 12m

4.查看集群状态

[root@xianchaomaster1 ~]# kubectl get nodes

NAME STATUS ROLES AGE VERSION

xianchaonode1 Ready <none> 38m v1.20.7

5.测试k8s集群部署tomcat服务

#把tomcat.tar.gz和busybox-1-28.tar.gz上传到xianchaonode1，手动解压

[root@xianchaonode1 ~]# docker load -i tomcat.tar.gz

[root@xianchaonode1 ~]# docker load -i busybox-1-28.tar.gz

[root@xianchaomaster1 ~]# kubectl apply -f tomcat.yaml

[root@xianchaomaster1 ~]# kubectl get pods

NAME READY STATUS RESTARTS AGE

demo-pod 2/2 Running 0 11m

[root@xianchaomaster1 ~]# kubectl apply -f tomcat-service.yaml

[root@xianchaomaster1 ~]# kubectl get svc

NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE

kubernetes ClusterIP 10.255.0.1 <none> 443/TCP 158m

tomcat NodePort 10.255.227.179 <none> 8080:30080/TCP 19m

在浏览器访问xianchaonode1节点的ip:30080即可请求到浏览器

使用二进制安装K8S 多master节点高可用集群-LMLPHP

6.验证cordns是否正常

[root@xianchaomaster1 ~]# kubectl run busybox --image busybox:1.28 --restart=Never --rm -it busybox -- sh

/ # ping www.baidu.com

PING www.baidu.com (39.156.66.18): 56 data bytes

64 bytes from 39.156.66.18: seq=0 ttl=127 time=39.3 ms

#通过上面可以看到能访问网络

/ # nslookup kubernetes.default.svc.cluster.local

Server: 10.255.0.2

Address: 10.255.0.2:53

Name: kubernetes.default.svc.cluster.local

Address: 10.255.0.1

/ # nslookup tomcat.default.svc.cluster.local

Server: 10.255.0.2

Address 1: 10.255.0.2 kube-dns.kube-system.svc.cluster.local

Name: tomcat.default.svc.cluster.local

Address 1: 10.255.227.179 tomcat.default.svc.cluster.local

#注意：

busybox要用指定的1.28版本，不能用最新版本，最新版本，nslookup会解析不到dns和ip，报错如下：

/ # nslookup kubernetes.default.svc.cluster.local

Server: 10.255.0.2

Address: 10.255.0.2:53

*** Can't find kubernetes.default.svc.cluster.local: No answer

10.255.0.2 就是我们coreDNS的clusterIP，说明coreDNS配置好了。

解析内部Service的名称，是通过coreDNS去解析的。

7.安装keepalived+nginx实现k8s apiserver高可用

把epel.repo上传到xianchaomaster1的/etc/yum.repos.d目录下，这样才能安装keepalived和nginx

把epel.repo传到xianchaomaster2、xianchaomaster3、xianchaonode1上

[root@xianchaomaster1 ~]# scp /etc/yum.repos.d/epel.repo xianchaomaster2:/etc/yum.repos.d/

[root@xianchaomaster1 ~]# scp /etc/yum.repos.d/epel.repo xianchaomaster3:/etc/yum.repos.d/

[root@xianchaomaster1 ~]# scp /etc/yum.repos.d/epel.repo xianchaonode1:/etc/yum.repos.d/

1、安装nginx主备：

在xianchaomaster1和xianchaomaster2上做nginx主备安装

[root@xianchaomaster1 ~]# yum install nginx keepalived -y

[root@xianchaomaster2 ~]# yum install nginx keepalived -y

2、修改nginx配置文件。主备一样

[root@xianchaomaster1 ~]# cat /etc/nginx/nginx.conf

user nginx;

worker_processes auto;

error_log /var/log/nginx/error.log;

pid /run/nginx.pid;

include /usr/share/nginx/modules/*.conf;

events {

worker_connections 1024;

}

# 四层负载均衡，为两台Master apiserver组件提供负载均衡

stream {

log_format main '$remote_addr $upstream_addr - [$time_local] $status $upstream_bytes_sent';

access_log /var/log/nginx/k8s-access.log main;

upstream k8s-apiserver {

server 192.168.40.180:6443; # xianchaomaster1 APISERVER IP:PORT

server 192.168.40.181:6443; # xianchaomaster2 APISERVER IP:PORT

server 192.168.40.182:6443; # xianchaomaster3 APISERVER IP:PORT

}

server {

listen 16443; # 由于nginx与master节点复用，这个监听端口不能是6443，否则会冲突

proxy_pass k8s-apiserver;

}

http {

log_format main '$remote_addr - $remote_user [$time_local] "$request" '

'$status $body_bytes_sent "$http_referer" '

'"$http_user_agent" "$http_x_forwarded_for"';

access_log /var/log/nginx/access.log main;

sendfile on;

tcp_nopush on;

tcp_nodelay on;

keepalive_timeout 65;

types_hash_max_size 2048;

include /etc/nginx/mime.types;

default_type application/octet-stream;

server {

listen 80 default_server;

server_name _;

location / {

}

[root@xianchaomaster2 ~]# cat /etc/nginx/nginx.conf

user nginx;

worker_processes auto;

error_log /var/log/nginx/error.log;

pid /run/nginx.pid;

include /usr/share/nginx/modules/*.conf;

events {

worker_connections 1024;

}

# 四层负载均衡，为两台Master apiserver组件提供负载均衡

stream {

log_format main '$remote_addr $upstream_addr - [$time_local] $status $upstream_bytes_sent';

access_log /var/log/nginx/k8s-access.log main;

upstream k8s-apiserver {

server 192.168.40.180:6443; # xianchaomaster1 APISERVER IP:PORT

server 192.168.40.181:6443; # xianchaomaster2 APISERVER IP:PORT

server 192.168.40.182:6443; # xianchaomaster3 APISERVER IP:PORT

}

server {

listen 16443; # 由于nginx与master节点复用，这个监听端口不能是6443，否则会冲突

proxy_pass k8s-apiserver;

}

http {

log_format main '$remote_addr - $remote_user [$time_local] "$request" '

'$status $body_bytes_sent "$http_referer" '

'"$http_user_agent" "$http_x_forwarded_for"';

access_log /var/log/nginx/access.log main;

sendfile on;

tcp_nopush on;

tcp_nodelay on;

keepalive_timeout 65;

types_hash_max_size 2048;

include /etc/nginx/mime.types;

default_type application/octet-stream;

server {

listen 80 default_server;

server_name _;

location / {

}

3、keepalive配置

主keepalived

[root@xianchaomaster1 ~]# cat /etc/keepalived/keepalived.conf

global_defs {

notification_email {

acassen@firewall.loc

failover@firewall.loc

sysadmin@firewall.loc

}

notification_email_from Alexandre.Cassen@firewall.loc

smtp_server 127.0.0.1

smtp_connect_timeout 30

router_id NGINX_MASTER

}

vrrp_script check_nginx {

script "/etc/keepalived/check_nginx.sh"

}

vrrp_instance VI_1 {

state MASTER

interface ens33 # 修改为实际网卡名

virtual_router_id 51 # VRRP 路由 ID实例，每个实例是唯一的

priority 100 # 优先级，备服务器设置 90

advert_int 1 # 指定VRRP 心跳包通告间隔时间，默认1秒

authentication {

auth_type PASS

auth_pass 1111

}

# 虚拟IP

virtual_ipaddress {

192.168.40.199/24

}

track_script {

check_nginx

}

#vrrp_script：指定检查nginx工作状态脚本（根据nginx状态判断是否故障转移）

#virtual_ipaddress：虚拟IP（VIP）

[root@xianchaomaster1 ~]# cat /etc/keepalived/check_nginx.sh

#!/bin/bash

count=$(ps -ef |grep nginx | grep sbin | egrep -cv "grep|$$")

if [ "$count" -eq 0 ];then

systemctl stop keepalived

[root@xianchaomaster1 ~]# chmod +x /etc/keepalived/check_nginx.sh

备keepalive

[root@xianchaomaster2 ~]# cat /etc/keepalived/keepalived.conf

global_defs {

notification_email {

acassen@firewall.loc

failover@firewall.loc

sysadmin@firewall.loc

}

notification_email_from Alexandre.Cassen@firewall.loc

smtp_server 127.0.0.1

smtp_connect_timeout 30

router_id NGINX_BACKUP

}

vrrp_script check_nginx {

script "/etc/keepalived/check_nginx.sh"

}

vrrp_instance VI_1 {

state BACKUP

interface ens33

virtual_router_id 51 # VRRP 路由 ID实例，每个实例是唯一的

priority 90

advert_int 1

authentication {

auth_type PASS

auth_pass 1111

}

virtual_ipaddress {

192.168.40.199/24

}

track_script {

check_nginx

}

[root@xianchaomaster2 ~]# cat /etc/keepalived/check_nginx.sh

#!/bin/bash

count=$(ps -ef |grep nginx | grep sbin | egrep -cv "grep|$$")

if [ "$count" -eq 0 ];then

systemctl stop keepalived

[root@xianchaomaster2 ~]# chmod +x /etc/keepalived/check_nginx.sh

#注：keepalived根据脚本返回状态码（0为工作正常，非0不正常）判断是否故障转移。

4、启动服务：

[root@xianchaomaster1 ~]# systemctl daemon-reload

[root@xianchaomaster1 ~]# yum install nginx-mod-stream -y

[root@xianchaomaster1 ~]# systemctl start nginx

[root@xianchaomaster1 ~]# systemctl start keepalived

[root@xianchaomaster1 ~]# systemctl enable nginx keepalived

[root@xianchaomaster2 ~]# systemctl daemon-reload

[root@xianchaomaster2 ~]# yum install nginx-mod-stream -y

[root@xianchaomaster2 ~]# systemctl start nginx

[root@xianchaomaster2 ~]# systemctl start keepalived

[root@xianchaomaster2 ~]# systemctl enable nginx keepalived

5、测试vip是否绑定成功

[root@xianchaomaster1 ~]# ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

valid_lft forever preferred_lft forever

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000

link/ether 00:0c:29:79:9e:36 brd ff:ff:ff:ff:ff:ff

inet 192.168.40.180/24 brd 192.168.40.255 scope global noprefixroute ens33

valid_lft forever preferred_lft forever

inet 192.168.40.199/24 scope global secondary ens33

valid_lft forever preferred_lft forever

inet6 fe80::b6ef:8646:1cfc:3e0c/64 scope link noprefixroute

valid_lft forever preferred_lft forever

6、测试keepalived：

停掉xianchaomaster1上的nginx。vip会漂移到xianchaomaster2

[root@xianchaomaster1 ~]# service nginx stop

目前所有的Worker Node组件连接都还是xianchaomaster1 Node，如果不改为连接VIP走负载均衡器，那么Master还是单点故障。

因此接下来就是要改所有Worker Node（kubectl get node命令查看到的节点）组件配置文件，由原来192.168.40.180修改为192.168.40.199（VIP）。

在所有Worker Node执行：

[root@xianchaonode1 ~]# sed -i 's#192.168.40.180:6443#192.168.40.199:16443#' /etc/kubernetes/kubelet-bootstrap.kubeconfig

[root@xianchaonode1 ~]# sed -i 's#192.168.40.180:6443#192.168.40.199:16443#' /etc/kubernetes/kubelet.json

[root@xianchaonode1 ~]# sed -i 's#192.168.40.180:6443#192.168.40.199:16443#' /etc/kubernetes/kubelet.kubeconfig

[root@xianchaonode1 ~]# sed -i 's#192.168.40.180:6443#192.168.40.199:16443#' /etc/kubernetes/kube-proxy.yaml

[root@xianchaonode1 ~]# sed -i 's#192.168.40.180:6443#192.168.40.199:16443#' /etc/kubernetes/kube-proxy.kubeconfig

[root@xianchaonode1 ~]# systemctl restart kubelet kube-proxy

这样高可用集群就安装好了

it技术分享just_free