一、说明
二、安装Swoole
- 下载解压
sudo wget https://github.com/swoole/swoole-src/archive/v4.3.6.tar.gz
cp v4.3.6.tar.gz swoole-v4.3.6.tar.gz
tar -zxvf swoole-v4.3.6.tar.gz
cd swoole-v4.3.6- 安装依赖
# 根据下面的编译提示进行选择安装
sudo apt-get install php-dev
sudo apt-get install autoconf- 编译安装
# 根据自己 php 安装的目录
cd swoole-v4.3.6
/usr/local/php/bin/phpize
./configure
make
sudo make installmake 的结果:
...
----------------------------------------------------------------------
Libraries have been installed in:
/home/fly/swoole-src-4.3.6/modules
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,--rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
Build complete.
Don't forget to run 'make test'.sudo make install 的结果:
Installing shared extensions: /usr/local/php/lib/php/extensions/no-debug-non-zts-20170718/
Installing header files: /usr/local/php/include/php/- 配置 php.ini
# 编译安装成功后，在 php.ini 文件加入
extension=swoole.so
# extension=/usr/lib/php/20170718/swoole.so查看是否加载 swoole 扩展
php -m- 错误排查（可忽略）
下面错误很明显，需要指定 php-conf 路径：
解决方法：
三、快速入门
a) TCP 服务器
# 创建 php 文件
vi tcp_server.php<?php
//创建Server对象，监听 127.0.0.1:9501端口
$serv = new Swoole\Server("127.0.0.1", 9501);
//监听连接进入事件
$serv->on('Connect', function ($serv, $fd) {
echo "Client: Connect.\n";
});
//监听数据接收事件
$serv->on('Receive', function ($serv, $fd, $from_id, $data) {
$serv->send($fd, "Server: ".$data);
});
//监听连接关闭事件
$serv->on('Close', function ($serv, $fd) {
echo "Client: Close.\n";
});
//启动服务器
$serv->start(); # 程序运行测试
# 运行 server
php tcp_server.php
# 使用telnet 测试（退出telnet：Ctrl+] 回车，输入quit 回车）
telnet 127.0.0.1 9501b) UDP 服务器
vi udp_server.php<?php
//创建Server对象，监听 127.0.0.1:9502端口，类型为SWOOLE_SOCK_UDP
$serv = new swoole_server("127.0.0.1", 9502, SWOOLE_PROCESS, SWOOLE_SOCK_UDP);
//监听数据接收事件
$serv->on('Packet', function ($serv, $data, $clientInfo) {
$serv->sendto($clientInfo['address'], $clientInfo['port'], "Server ".$data);
var_dump($clientInfo);
});
//启动服务器
$serv->start();
# 运行
php udp_server.php
# 使用 netcat 连接
netcat -u 127.0.0.1 9502c) HTTP 服务器
vi http_server.php<?php
$http = new Swoole\Http\Server("0.0.0.0", 9501);
$http->on('request', function ($request, $response) {
if ($request->server['path_info'] == '/favicon.ico' || $request->server['request_uri'] == '/favicon.ico') {
return $response->end();
}
var_dump($request->get, $request->post);
$response->header("Content-Type", "text/html; charset=utf-8");
$response->end("<h1>Hello Swoole. #".rand(1000, 9999)."</h1>");
});
$http->start();# 程序运行测试
php http_server.php
# 浏览器访问
127.0.0.1:9501d) WebSocket 服务器
vi ws_server.php<?php
//创建websocket服务器对象，监听0.0.0.0:9502端口
$ws = new swoole_websocket_server("0.0.0.0", 9502);
//监听WebSocket连接打开事件
$ws->on('open', function ($ws, $request) {
var_dump($request->fd, $request->get, $request->server);
$ws->push($request->fd, "hello, welcome\n");
});
//监听WebSocket消息事件
$ws->on('message', function ($ws, $frame) {
echo "Message: {$frame->data}\n";
$ws->push($frame->fd, "server: {$frame->data}");
});
//监听WebSocket连接关闭事件
$ws->on('close', function ($ws, $fd) {
echo "client-{$fd} is closed\n";
});
$ws->start();# 程序运行
php ws_server.php//使用浏览器JS代码如下
var wsServer = 'ws://127.0.0.1:9502';
var websocket = new WebSocket(wsServer);
websocket.onopen = function (evt) {
console.log("Connected to WebSocket server.");
};
websocket.onclose = function (evt) {
console.log("Disconnected");
};
websocket.onmessage = function (evt) {
console.log('Retrieved data from server: ' + evt.data);
};
websocket.onerror = function (evt, e) {
console.log('Error occured: ' + evt.data);
};e) 定时器
vi timer_tick.php//每隔2000ms触发一次
$timerId = swoole_timer_tick(2000, function ($timer_id) {
echo "tick-2000ms\n";
});
//9000ms后执行此函数
swoole_timer_after(9000, function () use ($timerId) {
echo "after-9000ms.\n";
//清除定时器
swoole_timer_clear($timerId);
});php timer_tick.phpf) 同步、异步 TCP 客户端
vi tcp_client.php<?php
$client = new swoole_client(SWOOLE_SOCK_TCP);
//连接到服务器
if (!$client->connect('127.0.0.1', 9501, 0.5))
{
die("connect failed.");
}
//向服务器发送数据
if (!$client->send("hello world"))
{
die("send failed.");
}
//从服务器接收数据
$data = $client->recv();
if (!$data)
{
die("recv failed.");
}
echo $data;
//关闭连接
$client->close();# 异步只能用于cli
vi tcp_async_client.php<?php
$client = new swoole_client(SWOOLE_SOCK_TCP, SWOOLE_SOCK_ASYNC);
//注册连接成功回调
$client->on("connect", function($cli) {
$cli->send("hello world\n");
});
//注册数据接收回调
$client->on("receive", function($cli, $data){
echo "Received: ".$data."\n";
});
//注册连接失败回调
$client->on("error", function($cli){
echo "Connect failed\n";
});
//注册连接关闭回调
$client->on("close", function($cli){
echo "Connection close\n";
});
//发起连接
$client->connect('127.0.0.1', 9501, 0.5);g) 协程客户端
vi xxx.php<?php
$http = new swoole_http_server("0.0.0.0", 9501);
$http->on('request', function ($request, $response) {
$db = new Swoole\Coroutine\MySQL();
$db->connect([
'host' => '127.0.0.1',
'port' => 3306,
'user' => 'user',
'password' => 'pass',
'database' => 'test',
]);
$data = $db->query('select * from test_table');
$response->end(json_encode($data));
});
$http->start();h) 协程：并发 shell_exec
vi xxx.php<?php
$c = 10;
while($c--) {
go(function () {
//这里使用 sleep 5 来模拟一个很长的命令
co::exec("sleep 5");
});
}