How to use USB 3G dongle/stick Huawei E169/E620/E800 ( Chip used Qualcomm e1750) in Linux (China and world)

Using this 3G module in Linux is so great. I want it. So I made it.

The 3G dongle of Huawei E169/E620/E800 is made from chip Qualcomm e1750. Yes, yet an American company. Huawei understands business.

   + 

I am using KDE based on ubuntu 14.04 AMD64.

After you pluging the dongle into computer, you would see this:

The Huawei Modem is recognized by Linux kernel and its modules.

Here are several ways of doing so.

1. Using system GUI -- networkmanager

Add a mobile boardband connection.

Choose Qualcomm E1750 if your system can detect it.

Then

Go on

Go on

Go on

Leave the username and password blank. If you are in China, then make sure the number is *99#

APN: 3gnet

Click ok.

Then go to connect it from your network manager.

2. Using KDE kppp (GUI)

You should install these packages before doing so.

sudo apt-get install ppp kppp wvdial -y

kppp has its GUI.

wvdial is the backend tool which kppp uses. Or you can use wvdial later in console only.

This would come out if it is sucessfully connected to the internet.

Leave the Login ID and password empty.

In tab Accounts, "New" a profile. And make it look like this.

Click configure and create a profile for connection.

Make sure number to be *99# if you are in China.

And authentication to be Terminal-based.

Then click ok to save it.

Then go to tab Modems. "New" a profile named "huawei3g".

And edit it.

Make sure it looks like this.

device: /dev/ttyUSB0

(it depends on how many devices you have sometimes. Everytime you plug in the 3G dongle, there would be 3 devices came out. They would be /dev/ttyUSB0 ,/dev/ttyUSB1, /dev/ttyUSB2 . ( ttyUSB0 is used for controlling the 3G dongle. And it supports AT commands. Others are some other stuff about voice call and so on)

Click OK to save it.

Then go back, and hit connect in kppp.

This is what you gonna see.

3. Using wvdial in command lines

sudo apt-get install ppp wvdial -y

then go to configure the wvdial

Make the file look like this:

[Dialer Defaults]

Init1 = ATZ

Init2 = ATQ0 V1 E1 S0= &C1 &D2 +FCLASS=

Modem Type = Analog Modem

Baud =

New PPPD = yes

Modem = /dev/ttyUSB0

ISDN =

; Phone = <Target Phone Number>

; Password = <Your Password>

; Username = <Your Login Name>

Phone = *#
; Phone = *99***1#           ; If you are in America or somewhere

Password = 3gnet

Username = 3gnet

And connect to internet in console:

Now you would see successfully we are connected to internet.

There is another interface called ppp0 here.

Hit Ctrl + C in console to disconnect.

4. Using Sakis3G GUI / commands scripts

Here are something from http://www.sakis3g.com/

more options:

then you are gonna see

Then

then

But I see this:

This really does not work. :(

So I go to commands.

sudo ./sakis3g "--sudo" OTHER="USBMODEM" USBMODEM="12d1:1001" "FORCE_APN=internet.public" \

USBINTERFACE="" APN_USER="user" APN_PASS="user" "connect" "info"

Remember this:

12d1 is the vendor ID, 1001 is the product ID.

And then try these in console.

It failed again... If you see:

Here are some knowledge from

To be continued.

Chip live debugging

If you want to check out what this module is shipped with. You could get into it's heart using CuteCom via Serial ports.

Happy hacking!