问题描述
为什么在目标VME 处理器主板系统上设置（32位）图像时出现BSOD错误。
Why a BSOD error during setup of (32 bit) image on target VME processor board system.
在ICE中，我为VME处理器添加了BSP 资源董事会
In ICE I added BSP recourses for a VME processor board
ICE我创建了一个答案文件，其中包含从VME板导入的设备（TAP.exe）
In ICE I created an answer file with import of devices from the VME board (TAP.exe)
在ICE我使用工具功能：从答案文件创建IBW图像...
In ICE I use the tool function: Create IBW Image From Answer File...
我将此图像放在可启动的USB上;将USB连接到VME板;它从USB启动;自动进入安装界面：安装程序正在启动...
I put this image on a bootable USB; Connect USB to VME board; It boots from USB; Automatically goes on to installation screen: Setup is starting...
在此屏幕上大约1分钟后，BSOD显示错误代码：0xCE
After about 1 minute on this screen the BSOD appears with error code: 0xCE
其他 错误代码信息：pci.sys; DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATION
Additional error code info: pci.sys; DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATION
在答案文件中，我看到了来自VME BSP资源的PCI.sys驱动程序的引用。
In the answer file I see a reference to a PCI.sys driver that comes from the VME BSP recourses.
我可以给你一张BSOD的图片和这个项目的答案文件。
I can give you a picture of the BSOD and the answer file of this project.
问候，Nanne Frijlink
Regards, Nanne Frijlink
推荐答案
您是否已将任何驱动程序添加到开箱即用的驱动程序文件夹中？哪有特殊的公交车司机？
Did you add any drivers to the out-of-box drivers folder? where any special bus drivers?
这篇关于使用应答文件设置时的PCI.sys BSOD的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！