EDI接收配置问题......

本文介绍了EDI接收配置问题......的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！ 问题描述 我正在尝试接收EDI文件，将其转换为XML并映射该文件再次发送之前。不幸的是，我还没有正确的派对/接收管道设置，以允许甚至转换文件。奇怪的是我正在使用X12 4010 810文件，但我收到的每条错误消息都说它试图读取X12 4050文件。 这并非总是如此，上周我发布了一些关于我在同一个文件中遇到的问题，并且错误消息都说它是4010文件。但现在不再是这样了......我正在使用biztalk 2006 R2附带的X12 0410 810 Schema。这是我使用的输入文件和错误，我有我可以通过电子邮件发送的配置设置的jpgs。感谢您的帮助和耐心，因为我是一个全新的biztalk用户。 输入文件： ISA~00〜〜00 ~~ ZZ~XXXCENTRAL2~ZZ~XXXXXEDI~080604~0716~X~00401~000001146〜0~P~：+ GS~IN~XXXCENTRAL2~PP~ 20080604~0716~1145~X~004010 + ST~810~0001 + BIG~20080603~1110870~20080602 ~~ 86525 ~~ DR + N1~ST~XXXXX SHAPES INC。+ FOB~DE~RT~XXX公司TR ~~ ~ZZ~PREPPAID& ADDED + IT1〜001〜22〜GA〜51.52〜RE〜BP〜UC105042〜PO〜407611-001〜LT〜51542 + QTY〜FL〜1 + CTP ~~ EUP〜113344 + PID〜F ~~ ZZ〜DRUM〜 DURANAR SADDLE BROWN + TDS~11334400 + AMT~ZZ~220 + SE~11~0001 + ST~810~0001 + BIG~20080603~1111194~20080602 ~~ 86525 ~~ DR + N1~ST~XXXXX SHAPES INC。+ FOB ~DE~RT~XXX公司TR ~~~ ZZ~PREPAID& ADDED + IT1〜001〜200〜GA〜18.84〜RE〜BP〜UC103346 *〜PO〜407615-001〜LT〜46717 + QTY〜FL〜5 + CTP ~~ EUP〜376800 + PID〜F ~~ ZZ〜DRUM ~DURACRON 100 FX WHITE + TDS~37680000 + AMT~ZZ~2000 + SE~11~0002 + GE~2~1145 + IEA~1~000001146 + 错误： 遇到错误：ERROR（17），interchangenr 10118： 段的顺序不正确。检查EDI schema.source格式：[5 00405，X12-4050] 源文档：[未知] 源段：[data＃ 0，def＃0，tag = I，name = unknown]，缺少交换头：[ISA]（msgnr：0 segnr：0）（行：0 pos：0 filepos：0） sender：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2] 发件人：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2]发件人：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2] 发件人：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2]发件人：[] [] [XXXCENTRAL2] [ZZ] [ XXXCENTRAL2] 发件人：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2]发件人：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2] 发件人：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2]收件人：[] [] [XXXXXEDI] [ZZ] [PP] 收件人：[] [ ] [XXXXXEDI] [ZZ] [PP] 来源格式：[5 00401，X12-4010] 源文件：[未知] 源段：[数据＃0，def＃0，tag = GS，name = unknown] 遇到错误： ERROR（17），interchangenr 10063： 段的顺序不正确。检查EDI schema.source格式：[5 00405，X12-4050] 源文档：[未知] 源段：[data＃ 0，def＃0，tag = I，name = unknown]，缺少 文档标题：[ST]（msgnr：0 segnr：0）（行： 0 pos：0 filepos：0） sender：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2] 发件人： [] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2]发件人：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2] 发件人：[] [] [XXXCENTRAL2] [ZZ ] [XXXCENTRAL2]发件人：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2] 发件人：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2]发件人：[] [ ] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2] 发件人：[] [] [XXXCENTRAL2] [ZZ] [XXXCENTRAL2]收件人：[] [] [XXXXXEDI] [ZZ] [PP ] 收件人：[] [] [XXXXXEDI] [ZZ] [PP] 来源格式：[5 00401，X12-4010] 源文件：[未知] 源段：[数据＃0，def＃0，tag = GS，name = unknown] 再次感谢， Kevin 解决方案 两件事想到这一点。 1。在PAM中，您确定在作为交换发送方的聚会的GS设置页面中有正确的版本号吗？ 2。在你的地图中，你确定810的模式是正确的版本吗？ JT  I am attempting to receive an EDI file, convert it to XML and map that file before sending it out again. Unfortunately i have yet to have the correct party/receive pipeline settings to allow the file to even be converted. The weird thing is that i am using an X12 4010 810 file, but every error message i receive says its trying to read an X12 4050 file. This hasnt always been the case, Last week i posted about some issues i was having with this same file and the error messages all said it was a 4010 file. but that is no longer the case... I am using the X12 0410 810 Schema that comes with biztalk 2006 R2. Here is the input file im using and the error, i have jpgs of the config settings i have in there that i can send via email. thanks for you help and patience as i am a brand new biztalk user. Input File:ISA~00~          ~00~          ~ZZ~XXXCENTRAL2     ~ZZ~XXXXXEDI    ~080604~0716~X~00401~000001146~0~P~:+GS~IN~XXXCENTRAL2~PP~20080604~0716~1145~X~004010+ST~810~0001+BIG~20080603~1110870~20080602~~86525~~DR+N1~ST~XXXXX SHAPES  INC.+FOB~DE~RT~XXX CORPORATE TR~~~ZZ~PREPAID & ADDED+IT1~001~22~GA~51.52~RE~BP~UC105042~PO~407611-001~LT~51542+QTY~FL~1+CTP~~EUP~113344+PID~F~~ZZ~DRUM~DURANAR SADDLE BROWN+TDS~11334400+AMT~ZZ~220+SE~11~0001+ST~810~0001+BIG~20080603~1111194~20080602~~86525~~DR+N1~ST~XXXXX SHAPES  INC.+FOB~DE~RT~XXX CORPORATE TR~~~ZZ~PREPAID & ADDED+IT1~001~200~GA~18.84~RE~BP~UC103346*~PO~407615-001~LT~46717+QTY~FL~5+CTP~~EUP~376800+PID~F~~ZZ~DRUM~DURACRON 100 FX WHITE+TDS~37680000+AMT~ZZ~2000+SE~11~0002+GE~2~1145+IEA~1~000001146+ Errors:Error encountered: ERROR (17), interchangenr 10118 :The order of the segments is incorrect. Check the EDI schema.source format: [5 00405 ,X12-4050]source document: [unknown]source segment: [data#0,def#0,tag=I ,name=unknown], missing interchange header: [ISA ] (msgnr:0 segnr:0)(line:0 pos:0 filepos:0)sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]recipient: [][] [XXXXXEDI][ZZ][PP]recipient: [][] [XXXXXEDI][ZZ][PP]source format: [5 00401 ,X12-4010]source document: [unknown]source segment: [data#0,def#0,tag=GS ,name=unknown]  Error encountered: ERROR (17), interchangenr 10063 :The order of the segments is incorrect. Check the EDI schema.source format: [5 00405 ,X12-4050]source document: [unknown]source segment: [data#0,def#0,tag=I ,name=unknown], missing document header: [ST ] (msgnr:0 segnr:0)(line:0 pos:0 filepos:0)sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]sender: [][] [XXXCENTRAL2][ZZ][XXXCENTRAL2]recipient: [][] [XXXXXEDI][ZZ][PP]recipient: [][] [XXXXXEDI][ZZ][PP]source format: [5 00401 ,X12-4010]source document: [unknown]source segment: [data#0,def#0,tag=GS ,name=unknown]     Thanks Again,  Kevin 解决方案 Two things pop into mind.1.  In PAM, are you sure you have the correct version number in the GS settings page for party as interchange sender?2.  In your map, are you sure your schema of the 810 is the correct version? JT  这篇关于EDI接收配置问题......的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！