本文介绍了Clojure - 配置`timbre'日志的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我使用 clojure.test 写了单元测试，我现在使用和。
I wrote unit tests using clojure.test, and I am now adding benchmarks to my application, using criterium and perforate.
这很好，但我有一个问题：的日志在我的基准。我使用，我不使用知道如何从Leiningen的Clojure代码配置它。
This works nicely, but I have a concern : I am seeing a lot of logs in my benchmark. I am using timbre, and I don't know how to configure it either from Clojure code of from Leiningen.
我没有设置配置映射，虽然它声称在README是超级简单，我didn'发现额外的文档，我很高兴与默认值。
I have not setup a config map, although it claims in the README to be super simple, I didn't found additional documentation, and I was happy so far with the defaults.
如何配置 timbre 在开发，生产和基准这是开发的子案例。
How do I configure timbre logging to have different profiles between development, production, and benchmarks (which is a sub-case of development).
注意：相关，我在Leiningen中使用生产和开发配置文件。
Note : in case this is relevant, I am using a production and development profiles in Leiningen already.
推荐答案
是的，Timbre文档可以改进。 我用来找出正确的设置：
Yes, the Timbre docs could be improved. Here is a demo program I used to figure out the right settings:
(ns log-timbre.core
(:require [clojure.java.io :as io]
[taoensso.timbre :as timbre] )
(:gen-class))
; Set up the name of the log output file and delete any contents from previous runs (the
; default is to continually append all runs to the file).
(def log-file-name "log.txt")
(io/delete-file log-file-name :quiet)
(timbre/refer-timbre) ; set up timbre aliases
; The default setup is simple console logging. We with to turn off console logging and
; turn on file logging to our chosen filename.
(timbre/set-config! [:appenders :standard-out :enabled?] false)
(timbre/set-config! [:appenders :spit :enabled?] true)
(timbre/set-config! [:shared-appender-config :spit-filename] log-file-name)
; Set the lowest-level to output as :debug
(timbre/set-level! :debug)
(defn my-fn
"A simple fn to demonstrate profiling"
[]
(let [nums (vec (range 1000))]
(+ (p :fast-sleep (Thread/sleep 1) 10)
(p :slow-sleep (Thread/sleep 2) 32)
(p :add (reduce + nums))
(p :sub (reduce - nums))
(p :mult (reduce * nums))
(p :div (reduce / nums)))))
(defn -main []
(println "Hello, World!") ; a short message to the console
; Demonstrate logging with Timbre
(trace "Hello, Timbre! trace") ; will not be logged, below current log-level
(debug "Hello, Timbre! debug")
(info "Hello, Timbre! info")
(warn "Hello, Timbre! warn")
(error "Hello, Timbre! error")
(fatal "Hello, Timbre! fatal")
; Demonstrate 3 arities of spy
(info "Arg-1")
(info "Arg-1" :Arg-2)
(info "Arg-1" :Arg-2 ["Arg-3"] )
(info "Arg-1" :Arg-2 ["Arg-3"] {:Arg 4} )
; Demonstrate 3 arities of spy
(assert (= {:a 1} (spy :info "Spy returns the last value" {:a 1} )))
(assert (= 42 (spy (* 6 7) ))) ; no level implies :debug
(assert (= 42 (spy :warn (* 6 7))))
(assert (= {:a 1} (spy :error "optional message" {:a 1} )))
; Even exceptions look nice in the logs
(error (Exception. "Doh!") "Any extra" :items {:go "here"} )
; Demonstrate profiling with Timbre
(info "(my-fn) => " (my-fn))
(profile :info :Arithmetic (dotimes [n 100] (my-fn)))
; Note that when using "lein run", we must place a call to (shutdown-agents) at the end of
; the main program. If this is omitted there is a one minute delay before (non-daemon)
; agent threads will shutdown. For some reason, however, this is not required for "lein
; test". Presumably "lein test" either calls either (shutdown-agents) or (System/exit 0)
; when it is complete.
(shutdown-agents)
)
将获得
> lein run
Hello, World!
所有操作都将进入文件 log.txt 如下：
All of the action will go into the file log.txt as follows:
> cat log.txt
2015-Sep-01 13:48:35 -0700 brandy DEBUG [log-timbre.core] - Hello, Timbre! debug
2015-Sep-01 13:48:35 -0700 brandy INFO [log-timbre.core] - Hello, Timbre! info
2015-Sep-01 13:48:35 -0700 brandy WARN [log-timbre.core] - Hello, Timbre! warn
2015-Sep-01 13:48:35 -0700 brandy ERROR [log-timbre.core] - Hello, Timbre! error
2015-Sep-01 13:48:35 -0700 brandy FATAL [log-timbre.core] - Hello, Timbre! fatal
2015-Sep-01 13:48:35 -0700 brandy INFO [log-timbre.core] - Arg-1
2015-Sep-01 13:48:35 -0700 brandy INFO [log-timbre.core] - Arg-1 :Arg-2
2015-Sep-01 13:48:35 -0700 brandy INFO [log-timbre.core] - Arg-1 :Arg-2 [Arg-3]
2015-Sep-01 13:48:35 -0700 brandy INFO [log-timbre.core] - Arg-1 :Arg-2 [Arg-3] {:Arg 4}
2015-Sep-01 13:48:35 -0700 brandy INFO [log-timbre.core] - Spy returns the last value {:a 1}
2015-Sep-01 13:48:35 -0700 brandy DEBUG [log-timbre.core] - (* 6 7) 42
2015-Sep-01 13:48:35 -0700 brandy WARN [log-timbre.core] - (* 6 7) 42
2015-Sep-01 13:48:35 -0700 brandy ERROR [log-timbre.core] - optional message {:a 1}
2015-Sep-01 13:48:35 -0700 brandy ERROR [log-timbre.core] - Any extra :items {:go here}
java.lang.Exception: Doh!
log-timbre.core/-main/invokeStatic core.clj: 58
log-timbre.core/-main core.clj
clojure.lang.Var.invoke Var.java: 375
user/eval508/invokeStatic form-init3759584005372406642.clj: 1
user/eval508 form-init3759584005372406642.clj
clojure.lang.Compiler.eval Compiler.java: 6946
clojure.lang.Compiler.eval Compiler.java: 6936
clojure.lang.Compiler.load Compiler.java: 7393
clojure.lang.Compiler.loadFile Compiler.java: 7331
clojure.main/load-script/invokeStatic main.clj: 275
clojure.main/init-opt/invokeStatic main.clj: 277
clojure.main/init-opt main.clj
clojure.main/initialize/invokeStatic main.clj: 308
clojure.main/null-opt/invokeStatic main.clj: 342
clojure.main/null-opt main.clj
clojure.main/main/invokeStatic main.clj: 421
clojure.main/main main.clj
clojure.lang.RestFn.invoke RestFn.java: 421
clojure.lang.Var.invoke Var.java: 383
clojure.lang.AFn.applyToHelper AFn.java: 156
clojure.lang.Var.applyTo Var.java: 700
clojure.main.main main.java: 37
2015-Sep-01 13:48:35 -0700 brandy INFO [log-timbre.core] - (my-fn) => 42
2015-Sep-01 13:48:36 -0700 brandy INFO [log-timbre.core] - Profiling: :log-timbre.core/Arithmetic
Id nCalls Min Max MAD Mean Time% Time
:log-timbre.core/slow-sleep 100 2.0ms 2.0ms 11.0μs 2.0ms 59 208.0ms
:log-timbre.core/fast-sleep 100 1.0ms 1.0ms 11.0μs 1.0ms 31 108.0ms
:log-timbre.core/div 100 33.0μs 420.0μs 37.0μs 70.0μs 2 7.0ms
:log-timbre.core/mult 100 16.0μs 384.0μs 28.0μs 42.0μs 1 4.0ms
:log-timbre.core/sub 100 10.0μs 308.0μs 27.0μs 33.0μs 1 3.0ms
:log-timbre.core/add 100 9.0μs 326.0μs 27.0μs 33.0μs 1 3.0ms
Clock Time 100 351.0ms
Accounted Time 95 334.0ms
这篇关于Clojure - 配置`timbre'日志的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！