Chain Installer最后挂起。连锁MSI

本文介绍了Chain Installer最后挂起。连锁MSI的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！问题描述限时删除！！我是b $ b我面临的问题是安装在最后。完成对话框永远不会出现。我可以看到已经安装了所有CA已正确运行的所有文件。详细信息。我使用的是InstallShield Professional 2009. 我使用的是基本MSI setup.exe。它是一个3 msis的链式安装程序。它是Windows 2003服务器。所有三个链式msis都安装正确。它不是持久的再生产。如果我再次卸载并重新安装软件包，安装将会很好。 $ 请告诉我任何指示，以便我可以查看它们。这是Windows安装程序报告的最后一个日志条目。由于发布限制，我删除了几行日志。这里inLine Bud Service是最后安装的连锁包。安装完成后，Installer将返回到父包。我在故障日志中看到，在安装最后一个连锁包后，安装人员没有继续进行安装。 MSI（s）（ 34：FC）[16：45：39：354]：注意：1：1707 MSI（s）（34：FC）[16：45：39：354]：产品：myproduct inLine Bud Service - 安装操作成功完成。 MSI（s）（34：FC）[16：45：39：354]：Windows Installer安装了产品。产品名称：myproduct inLine Bud Service。产品版本：1.0.0.1452。产品语言：1033。安装成功或错误状态：0。¥ MSI（s）（34：FC）[16：45：39：354]：MainEngineThread是返回0 ===记录停止：5/2/2011 16:45:39 === MSI（c）（B8：DC）[16:45 ：39：464]：减少计数器以禁用关机。如果counter> = 0，则拒绝关闭。递减后的计数器：-1 MSI（c）（B8：DC）[16：45：39：464]：MainEngineThread返回0 ===详细记录停止：5/2/2011 16:45:39 === MSI（s）（34:40）[16：45：39：495]：用户策略值'DisableRollback'为0 MSI（s）（34:40）[16：45：39：495]：机器策略值'DisableRollback'为0 MSI（s）（34:40）[16：45：39：495]：递增计数器以禁用关机。增量后的计数器：0 MSI（s）（34:68）[16：45：39：511]：调用远程自定义动作。 DLL：C：\ WINDOWS \ Installer \ MSI16DD.tmp，Entrypoint：ISChainPackagesCleanup MSI（s）（34:40）[16：45：39：682]：将计数器递减以禁用关掉。如果counter> = 0，则拒绝关闭。减量后的计数器：-1 MSI（s）（34:40）[16：45：39：682]：恢复环境变量 MSI（s）（34）：40）[16：45：39：682]：此安装没有系统恢复序列号。 $ ---- ------------------------------------------- 但是使用"安装完成"对话框进行的完整安装将包含以下日志 $ -------------------------- ---------------------- $ MSI（s）（74:54）[22：22：17：265]：注意：1：1707 MSI（s）（74:54）[22：22：17：265]：产品： myproduct inLine Bud Service - 安装操作成功完成。 MSI（s）（74:54）[22：22：17：265]：Windows Installer安装了产品。产品名称：myproduct inLine Bud Service。产品版本：1.0.0.1443。产品语言：1033。安装成功或错误状态：0。¥ MSI（s）（74:54）[22：22：17：265]：MainEngineThread是返回0 ===记录停止：4/26/2011 22:22:17 === MSI（c）（28：CC）[22:22 ：17：374]：递减计数器以禁用关闭。如果counter> = 0，则拒绝关闭。递减后的计数器：-1 MSI（c）（28：CC）[22：22：17：374]：MainEngineThread返回0 ===详细记录停止：4/26/2011 22:22:17 === MSI（s）（74:20）[22：22：17：390]：用户策略值'DisableRollback'为0 MSI（s）（74:20）[22：22：17：390]：机器策略值'DisableRollback'为0 MSI（s）（74:20）[22：22：17：390]：递增计数器以禁用关机。增量后的计数器：0 MSI（s）（74:34）[22：22：17：406]：调用远程自定义动作。 DLL：C：\ WINDOWS \ Installer \ MSI97F.tmp，Entrypoint：ISChainPackagesCleanup MSI（s）（74:20）[22：22：17：562]：减少计数器以禁用关掉。如果counter> = 0，则拒绝关闭。递减后的计数器：-1 MSI（s）（74:20）[22：22：17：562]：恢复环境变量 MSI（s）（74 ：20）[22：22：17：562]：此安装没有系统还原序列号。 ===详细日志记录已启动：4/26/2011 22:22:17构建类型： SHIP UNICODE 4.05.6001.00呼叫过程：C：\ WINDOWS \ Installer \ MSI89B.tmp === MSI（c）（28:50）[22：22：17：562] ：启用伪装。 MSI（c）（28:50）[22：22：17：562]：在调用Install on Server之前尝试启用所有禁用的权限 ===详细记录停止：4/26/2011 22:22:17 === MSI（c）（10：EC）[22:22： 17：577]：从服务器返回。返回值：0 MSI（c）（10：EC）[22：22：17：577]：递减计数器以禁用关机。如果counter> = 0，则拒绝关闭。减量后的计数器：-1 MSI（c）（10：EC）[22：22：17：577]：物业变更：删除SECONDSEQUENCE属性。它的当前值是'1'。行动结束22:22:17：ExecuteAction。返回值1. MSI（c）（10：EC）[22：22：17：577]：采取行动：DLLWrapCleanup 行动22:22:17： DLLWrapCleanup。行动开始22:22:17：DLLWrapCleanup。 MSI（c）（10：EC）[22：22：17：577]：创建类型790542的MSIHANDLE（710）用于线程6124 （10！FC）[22：22：17：749]：为线程2556创建类型790540的MSIHANDLE（748） M MSI（c）（10！FC）[22：22：17：765]：关闭线程2556的类型790541的MSIHANDLE（771） MSI （c）（10！FC）[22：22：17：765]：关闭线程2556的类型790540的MSIHANDLE（772） MSI（c）（10：B0）[22:22 ：17：765]：关闭线程6124的类型790542的MSIHANDLE（710）动作结束22:22:17：DLLWrapCleanup。返回值1. MSI（c）（10：EC）[22：22：17：765]：采取行动：ISSetupFilesCleanup 行动22:22:17： ISSetupFilesCleanup。 $ 行动开始22:22:17：ISSetupFilesCleanup。 MSI（c）（10：EC）[22：22：17：765]：创建线程6124的类型790542的MSIHANDLE（774） MSI（c）（10：D4）[22：22：17：765]：调用远程自定义动作。 DLL：C：\ DOCUME~1 \\\\LOCALS~1 \Temp \ MSI982.tmp，入口点：SFCleanupEx MSI（c）（10！E0）[22:22 ：17：859]：为线程6112创建790531型的MSIHANDLE（775） 1：删除支持文件：C：\ DOCUME~1 \\\\LOCALS~1\Temp \\ {3C230D85-CB6A-47DA-A647-41CDE9F8E235} \ AgentUISetupHelper.dll MSI（c）（10！E0）[22：22：17：859]：关闭MSIHANDLE（775）类型为790531，用于螺纹6112 $ MSI（c）（10！E0）[22：22：17：859]：为螺纹6112创建类型790531的MSIHANDLE（776） 1：删除支持文件：C：\DOCUME~1 \\\\LOCALS~1\Temp \ {3C230D85-CB6A-47DA-A647-41CDE9F8E235} \ importpfx.exe MSI（c）（10！E0）[22：22：17：859]：关闭线程6112的类型790531的MSIHANDLE（776） MSI（c）（10！E0） [22：22：17：859]：为线程6112创建类型790531的MSIHANDLE（777） 1：删除支持文件：C：\ DOCUME~1 \\\\LOCALS~1 \Temp\ {3C230D85-CB6A -47DA-A647-41CDE9F8E235} \ libeay32.dll MSI（c）（10！E0）[22：22：17：859]：关闭线程类型790531的MSIHANDLE（777） 6112 MSI（c）（10！E0）[22：22：17：859]：为线程6112创建类型790531的MSIHANDLE（778） 1：正在删除支持文件：C：\ DOCUME~1 \\\\LOCALS~1 \ Temp \ {3C230D85-CB6A-47DA-A647-41CDE9F8E235} \ SDConfig.inf MSI（ c）（10！E0）[22：22：17：859]：关闭线程6112的类型790531的MSIHANDLE（778） MSI（c）（10！E0）[22:22： 17：859]：为线程6112创建类型790531的MSIHANDLE（779） 1：删除支持文件：C：\ DOCUME~1 \\\\LOCALS~1 \ Temp \ {3C230D85-CB6A-47DA-A647-41CDE9F8E235} \ SDIBMConfig.dll MSI（c）（10！E0）[22：22：17：859]：关闭MSIHANDLE（779）类型790531用于线程6112 MSI（c）（10！E0）[22：22：17：859]：为线程6112创建类型790531的MSIHANDLE（780） 1：删除支持文件：C：\DOCUME~1 \ 1 \ LOCALS~1 \Temp \ {3C230D85-CB6A-47DA-A647-41CDE9F8E235} \ SDKyoConfig.dll MSI（c）（10！E0）[22:22:17 ：859]：关闭线程6112的类型790531的MSIHANDLE（780） MSI（c）（10！E0）[22：22：17：859]：创建类型790531的MSIHANDLE（781） for thread 6112 1：删除支持文件：C：\DOCUME~1 \\\\LOCALS~1 \ Temp \ {3C230D85-CB6A-47DA-A647-41CDE9F8E235} \ ssleay32.dll MSI（c）（10！E0）[22：22：17：859]：关闭线程6112的类型790531的MSIHANDLE（781） MSI（c）（10：D4）[22：22：17：952]：关闭线程6124的类型790542的MSIHANDLE（774）动作结束22:22:17：ISSetupFilesCleanup。返回值1. MSI（c）（10：EC）[22：22：17：952]：采取行动：SetupCompleteSuccess 行动22:22:17： SetupCompleteSuccess。操作开始22:22:17：SetupCompleteSuccess。操作22:22:17：SetupCompleteSuccess。对话框创建 MSI（c）（10：D4）[22：36：14：511]：执行操作：ISSetupFilesCleanup 操作22:36:14：ISSetupFilesCleanup。 $ 行动开始22:36:14：ISSetupFilesCleanup。 MSI（c）（10：D4）[22：36：14：511]：创建MSIHANDLE（ 782）类型790542用于线程4052 MSI（c）（10：B0）[22：36：14：511]：调用远程自定义操作。 DLL：C：\ DOCUME~1 \\\\LOCALS~1 \Temp \ MSI983.tmp，入口点：SFCleanupEx MSI（c）（10：B0）[22:36 ：14：558]：关闭线程4052的类型790542的MSIHANDLE（782）动作结束22:36:14：ISSetupFilesCleanup。返回值1. 行动结束22:36:14：SetupCompleteSuccess。返回值2. 行动结束22:36:14：安装。返回值1. MSI（c）（10：EC）[22：36：14：573]：销毁RemoteAPI对象。 MSI（c）（10： 94）[22：36：14：589]：自定义操作管理器线程结束。属性（C）：DiskPrompt = [1] 属性（C）：UpgradeCode = {39058B1C-DB70-4B21-9D96-6BCE3FF762DC} 物业（C）：ProductCode = {3C230D85-CB6A-47DA-A647-41CDE9F8E235} 物业（C）：PROCESS_EXISTS = NO 物业（C）：EXISTING_EXTENSION_RCU = 0 物业（C）：OPROCESS_EXISTS =否物业（C）：EXISTING_EXTENSION_VSC = 0 物业（C）：EXISTING_EXTENSION_NVPF = 0 物业（C）：CHECK_PROCESS_OK = 0 物业（C）：PORTSVALID = 1 财产（C）：PLUGIN_TYPE = 0 财产（C）：NON_HV_OS = 1 财产（C）：NO_SPACE_AVAILABLE = 0 财产（C）：CHECK_EXE_OK = 0 财产（C）：PrimaryVolumeSpaceRemaining = 0 财产（C）：PrimaryVolumeSpaceRequired = 0 Property（C）：PrimaryVolumeSpaceAvailable = 0 物业（C）：OutOfNoRbDiskSpace = 0 物业（C）：OutOfDiskSpace = 0 物业（C）：SourcedirProduct = { 3C230D85-CB6A-47DA-A647-41CDE9F8E235} 物业（C）：SETUPEXECOUNT =否物业（C）：成本核算完成= 1 属性（C）：ROOTDRIVE = C：\ 属性（C）：SDCONFIG_LIB_PATH = C：\ DOCUME~1 \\\\LOCALS~1\Temp \ SDConfig.dll Py（C）：CommonAppDataFolder = C：\Documents and Settings \All Users \ Application Data \ Property（C）：TemplateFolder = C：\文件和设置\所有用户\模板\¥b $ b物业（C）：HS_DYMC_CERT = null 物业（C）：HSFOLDERREMOVE = 1 物业（C）：ISCHECKFORPRODUCTUPDATES = 1 物业（C）：RCU1 = 0 物业（C）：RCU11 = 0 物业（C）：SD_AgentUI = 0 物业（C）：VSC1 = 0 物业（C）：NewProperty50 = 0 物业（ C）：NewProperty51 = 0 Prope rty（C）：ApplicationUsers = AllUsers 物业（C）：NewProperty10 = 0 物业（C）：NewProperty11 = 0 物业（ C）：NewProperty25 = 0 物业（C）：NewProperty195 = 0 物业（C）：NewProperty20 = 0 物业（C）：NewProperty26 = 0 Property（C）：NewProperty27 = 0 Property（C）：NewProperty37 = 0 Property（C）：AgentUI_SERVER_SSL_PORT = 8488 物业（C）：AgentUI_SERVER_COM_PORT = 8488 $ 物业（C）：HS_MGM_PORT = 8799 物业（C）：HS_ADMIN_PORT = 8699 财产（C）：HS_FS_PORT = 8897 财产（C）：TCPIP_PORT = 808 财产（C）：HTTP_PORT = 4094 Property（C）：HTTPS_PORT = 4095 Pro）：SMHVINSTALLED = 0 Property（C）：SMVI_PLUGIN_PORT = 8044 属性（C）：SVCACCOUNTVALID = 1 属性（C）：SecureCustomProperties = ISFOUNDNEWERPRODUCTVERSION; USERNAME; COMPANYNAME; ISX_SERIALNUM; SUPPORTDIR; VSC1; RCU1; RCU11; SD_AgentUI; HS_MGM_ PORT; HS_ADMIN_PORT; HS_FS_PORT; PLUGIN_PORT; TCPIP_PORT; HTTP_PORT; HTTPS_PORT; SVCUSERNAME; SVCCONFIRMUSERname; AgentUI_SKIP_VERIFY; AgentUI_SERVER_COM_PORT; AgentUI_SERVER_USERNAME; AgentUI_SERVER_SSL_PORT; AgentUI_SERVER_name; HSFOLDERREMOVE; AgentUI_SERVER_INFO; EXISTING_VSPHERE_EXTENSIONS_TEXT; VMWARE_PLUGIN_IP; VCENTER_IP; VCENTER_USERNAME; VCENTER_name; VCENTER_PORT; VC_SKIP_VERIFY; RemoveTempISFiles; AgentUI_SRV_LOGON_PASS; SMHVSRV_name; SMHVSRV_CONFIRMUSERname; SVCUSERname; SVCCONFIRMUSERname; AgentUI_SERVER_name; VCENTER_name;名称; PSPOG_KEYSTORE_PASS; PSPOG_KEY_PASS; HS_DYMC_CERT 属性（C）：SetupType =典型属性（C）：TRANSPORT_PRT_SELECTION = 1 物业（C）：VALID_AgentUI_SRV_DETECTED = 0 物业（C）：VCACCOUNTVALID = 1 物业（C）：卖方= Kyo 物业（C）：VMWAREUPGRADE = 1 物业（C）：VSC = 0 物业（C）：ISReleaseFlags = X86 物业（C）：SETUPEXENAME = ocInLine-setup-mainN_110425_1615-x86.exe 属性（C）：MsiLogFileLocation = C：\ DOCUME~1 \\\\LOCALS~1\Temp \ MSI25c07.LOG 属性（C）：VMPLUGINVALID = 1 属性（C）：SendToFolder = C：\Documents and Settings\1\SendTo \ 属性（C）：RecentFolder = C：\Documents and Settings \1\Recent \ 属性（C）：PrintHoodFolder = C：\Documents和设置\1\PrintHood \ $ Property（C）：PersonalFold er = C：\Documents and Settings \1 \ My Documents \ Property（C）：NetHoodFolder = C：\ Document and Settings \\\\ NetHood \ 属性（C）：FavoritesFolder = C：\Documents and Settings \1\Favorites \ 属性（C）：AppDataFolder = C：\Documents and Settings \\\\Application Data \ Property（C）：TempFolder = C：\ DOCUME~1 \\\\LOCALS~1 \Temp \ 属性（C）：RemoteAdminTS = 1 属性（C）：SVCUSERNAME = VIM \1 属性（C）：SVCUSERname = ****** **** 属性（C）：System16Folder = C：\ WINDOWS \ system \ 属性（C）：SystemFolder = C：\ WINDOWS \\ \\ system32 \ $ Property（C）：WindowsVolume = C：\ Property（C）：MsiNTSuiteEnterprise = 1 Property（C ）：MsiNTProductType = 3 属性（C）：_ BroseProperty = INSTALLDIR 属性（C）：ServicePackLevelMinor = 0 正确ty（C）：ServicePackLevel = 2 物业（C）：COMPANYNAME = Kyo 物业（C）：USERNAME = mvikram 物业（ C）：AgentUI_SKIP_VERIFY = 1 属性（C）：AgentUI_SERVER_INFO = AgentUI_IP 属性（C）：AgentUI_SERVER_USERNAME = AgentUI_SERVER_USERNAME 属性（C）：WindowsBuild = 3790 Property（C）：PLUGIN_PORT = 8044 Property（C）：VersionMsi = 4.05 Property（C）：VersionDatabase = 200 财产（C）：CLIENTPROCESSID = 5904 财产（C）：CLIENTUILEVEL = 0 财产（C）：CURRENTDIRECTORY = C ：\Documents and Settings \1\Desktop Property（C）：SETUPEXEDIR = C：\Documents and Settings\1\Desktop Property（ C）：PackagecodeChanging = 1 Property（C）：ProductState = -1 Property（C）：PackageCode = {BBC4CBB2-5FC7-4683-B3C6-7CDFA4C96954} $ ===停止记录：2011年4月26日22:36:14 === MSI（c）（10：EC）[22：36：1 4：620]：注意：1：1707 MSI（c）（10：EC）[22：36：14：620]：产品：myproduct inLine Bud Service - 安装操作成功完成。$ MSI（c）（10：EC）[22：36：14：620]：Windows Installer安装了该产品。产品名称：myproduct inLine Bud Service。产品版本：1.0。产品语言：1033。安装成功或错误状态：0。¥ MSI（c）（10：EC）[22：36：14：636]：抓取执行mutex。 MSI（c）（10：EC）[22：36：14：636]：清理已卸载的安装包（如果有） MSI（c）（10：EC）[22：36：14：636]：MainEngineThread返回0 ===详细记录停止：4/26/2011 22:36:14 ===Hi,I am facing an issue where in the Installation is hanging at the end. The finish dialog never comes up. I can see that all the files have got installed all the CAs have run properly. Details.I am using InstallShield Professional 2009.I am using Basic MSI setup.exe.It is a chain Installer with 3 msis.Its a Windows 2003 server.All the three chained msis are installed properly. IT IS NOT PERSISTANTLY REPRODUCED. If i Uninstall and reinstall the package again, Installation will just go fine. Please let me know any pointers so that i can look at them. Here is the last log entry reported by the windows installer..I have removed few lines of log because of the limit of posting.Here inLine Bud Service is the last chain package to be installed. After it get installed, Installer will return to the parent package. I see in the failure log,Installer is not proceeding further after last chain package gets installed. MSI (s) (34:FC) [16:45:39:354]: Note: 1: 1707 MSI (s) (34:FC) [16:45:39:354]: Product: myproduct inLine Bud Service -- Installation operation completed successfully.MSI (s) (34:FC) [16:45:39:354]: Windows Installer installed the product. Product Name: myproduct inLine Bud Service. Product Version: 1.0.0.1452. Product Language: 1033. Installation success or error status: 0.MSI (s) (34:FC) [16:45:39:354]: MainEngineThread is returning 0=== Logging stopped: 5/2/2011 16:45:39 ===MSI (c) (B8:DC) [16:45:39:464]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1MSI (c) (B8:DC) [16:45:39:464]: MainEngineThread is returning 0=== Verbose logging stopped: 5/2/2011 16:45:39 ===MSI (s) (34:40) [16:45:39:495]: User policy value 'DisableRollback' is 0MSI (s) (34:40) [16:45:39:495]: Machine policy value 'DisableRollback' is 0MSI (s) (34:40) [16:45:39:495]: Incrementing counter to disable shutdown. Counter after increment: 0MSI (s) (34:68) [16:45:39:511]: Invoking remote custom action. DLL: C:\WINDOWS\Installer\MSI16DD.tmp, Entrypoint: ISChainPackagesCleanupMSI (s) (34:40) [16:45:39:682]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1MSI (s) (34:40) [16:45:39:682]: Restoring environment variablesMSI (s) (34:40) [16:45:39:682]: No System Restore sequence number for this installation.-----------------------------------------------But the complete installation with the Setup Finish dialog will have the following log ------------------------------------------------MSI (s) (74:54) [22:22:17:265]: Note: 1: 1707 MSI (s) (74:54) [22:22:17:265]: Product: myproduct inLine Bud Service -- Installation operation completed successfully.MSI (s) (74:54) [22:22:17:265]: Windows Installer installed the product. Product Name: myproduct inLine Bud Service. Product Version: 1.0.0.1443. Product Language: 1033. Installation success or error status: 0.MSI (s) (74:54) [22:22:17:265]: MainEngineThread is returning 0=== Logging stopped: 4/26/2011 22:22:17 ===MSI (c) (28:CC) [22:22:17:374]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1MSI (c) (28:CC) [22:22:17:374]: MainEngineThread is returning 0=== Verbose logging stopped: 4/26/2011 22:22:17 ===MSI (s) (74:20) [22:22:17:390]: User policy value 'DisableRollback' is 0MSI (s) (74:20) [22:22:17:390]: Machine policy value 'DisableRollback' is 0MSI (s) (74:20) [22:22:17:390]: Incrementing counter to disable shutdown. Counter after increment: 0MSI (s) (74:34) [22:22:17:406]: Invoking remote custom action. DLL: C:\WINDOWS\Installer\MSI97F.tmp, Entrypoint: ISChainPackagesCleanupMSI (s) (74:20) [22:22:17:562]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1MSI (s) (74:20) [22:22:17:562]: Restoring environment variablesMSI (s) (74:20) [22:22:17:562]: No System Restore sequence number for this installation.=== Verbose logging started: 4/26/2011 22:22:17 Build type: SHIP UNICODE 4.05.6001.00 Calling process: C:\WINDOWS\Installer\MSI89B.tmp ===MSI (c) (28:50) [22:22:17:562]: Cloaking enabled.MSI (c) (28:50) [22:22:17:562]: Attempting to enable all disabled privileges before calling Install on Server=== Verbose logging stopped: 4/26/2011 22:22:17 ===MSI (c) (10:EC) [22:22:17:577]: Back from server. Return value: 0MSI (c) (10:EC) [22:22:17:577]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1MSI (c) (10:EC) [22:22:17:577]: PROPERTY CHANGE: Deleting SECONDSEQUENCE property. Its current value is '1'.Action ended 22:22:17: ExecuteAction. Return value 1.MSI (c) (10:EC) [22:22:17:577]: Doing action: DLLWrapCleanupAction 22:22:17: DLLWrapCleanup. Action start 22:22:17: DLLWrapCleanup.MSI (c) (10:EC) [22:22:17:577]: Creating MSIHANDLE (710) of type 790542 for thread 6124(10!FC) [22:22:17:749]: Creating MSIHANDLE (748) of type 790540 for thread 2556MMSI (c) (10!FC) [22:22:17:765]: Closing MSIHANDLE (771) of type 790541 for thread 2556MSI (c) (10!FC) [22:22:17:765]: Closing MSIHANDLE (772) of type 790540 for thread 2556MSI (c) (10:B0) [22:22:17:765]: Closing MSIHANDLE (710) of type 790542 for thread 6124Action ended 22:22:17: DLLWrapCleanup. Return value 1.MSI (c) (10:EC) [22:22:17:765]: Doing action: ISSetupFilesCleanupAction 22:22:17: ISSetupFilesCleanup. Action start 22:22:17: ISSetupFilesCleanup.MSI (c) (10:EC) [22:22:17:765]: Creating MSIHANDLE (774) of type 790542 for thread 6124MSI (c) (10:D4) [22:22:17:765]: Invoking remote custom action. DLL: C:\DOCUME~1\1\LOCALS~1\Temp\MSI982.tmp, Entrypoint: SFCleanupExMSI (c) (10!E0) [22:22:17:859]: Creating MSIHANDLE (775) of type 790531 for thread 61121: Deleting Support File: C:\DOCUME~1\1\LOCALS~1\Temp\{3C230D85-CB6A-47DA-A647-41CDE9F8E235}\AgentUISetupHelper.dll MSI (c) (10!E0) [22:22:17:859]: Closing MSIHANDLE (775) of type 790531 for thread 6112MSI (c) (10!E0) [22:22:17:859]: Creating MSIHANDLE (776) of type 790531 for thread 61121: Deleting Support File: C:\DOCUME~1\1\LOCALS~1\Temp\{3C230D85-CB6A-47DA-A647-41CDE9F8E235}\importpfx.exe MSI (c) (10!E0) [22:22:17:859]: Closing MSIHANDLE (776) of type 790531 for thread 6112MSI (c) (10!E0) [22:22:17:859]: Creating MSIHANDLE (777) of type 790531 for thread 61121: Deleting Support File: C:\DOCUME~1\1\LOCALS~1\Temp\{3C230D85-CB6A-47DA-A647-41CDE9F8E235}\libeay32.dll MSI (c) (10!E0) [22:22:17:859]: Closing MSIHANDLE (777) of type 790531 for thread 6112MSI (c) (10!E0) [22:22:17:859]: Creating MSIHANDLE (778) of type 790531 for thread 61121: Deleting Support File: C:\DOCUME~1\1\LOCALS~1\Temp\{3C230D85-CB6A-47DA-A647-41CDE9F8E235}\SDConfig.inf MSI (c) (10!E0) [22:22:17:859]: Closing MSIHANDLE (778) of type 790531 for thread 6112MSI (c) (10!E0) [22:22:17:859]: Creating MSIHANDLE (779) of type 790531 for thread 61121: Deleting Support File: C:\DOCUME~1\1\LOCALS~1\Temp\{3C230D85-CB6A-47DA-A647-41CDE9F8E235}\SDIBMConfig.dll MSI (c) (10!E0) [22:22:17:859]: Closing MSIHANDLE (779) of type 790531 for thread 6112MSI (c) (10!E0) [22:22:17:859]: Creating MSIHANDLE (780) of type 790531 for thread 61121: Deleting Support File: C:\DOCUME~1\1\LOCALS~1\Temp\{3C230D85-CB6A-47DA-A647-41CDE9F8E235}\SDKyoConfig.dll MSI (c) (10!E0) [22:22:17:859]: Closing MSIHANDLE (780) of type 790531 for thread 6112MSI (c) (10!E0) [22:22:17:859]: Creating MSIHANDLE (781) of type 790531 for thread 61121: Deleting Support File: C:\DOCUME~1\1\LOCALS~1\Temp\{3C230D85-CB6A-47DA-A647-41CDE9F8E235}\ssleay32.dll MSI (c) (10!E0) [22:22:17:859]: Closing MSIHANDLE (781) of type 790531 for thread 6112MSI (c) (10:D4) [22:22:17:952]: Closing MSIHANDLE (774) of type 790542 for thread 6124Action ended 22:22:17: ISSetupFilesCleanup. Return value 1.MSI (c) (10:EC) [22:22:17:952]: Doing action: SetupCompleteSuccessAction 22:22:17: SetupCompleteSuccess. Action start 22:22:17: SetupCompleteSuccess.Action 22:22:17: SetupCompleteSuccess. Dialog createdMSI (c) (10:D4) [22:36:14:511]: Doing action: ISSetupFilesCleanupAction 22:36:14: ISSetupFilesCleanup. Action start 22:36:14: ISSetupFilesCleanup.MSI (c) (10:D4) [22:36:14:511]: Creating MSIHANDLE (782) of type 790542 for thread 4052MSI (c) (10:B0) [22:36:14:511]: Invoking remote custom action. DLL: C:\DOCUME~1\1\LOCALS~1\Temp\MSI983.tmp, Entrypoint: SFCleanupExMSI (c) (10:B0) [22:36:14:558]: Closing MSIHANDLE (782) of type 790542 for thread 4052Action ended 22:36:14: ISSetupFilesCleanup. Return value 1.Action ended 22:36:14: SetupCompleteSuccess. Return value 2.Action ended 22:36:14: INSTALL. Return value 1.MSI (c) (10:EC) [22:36:14:573]: Destroying RemoteAPI object.MSI (c) (10:94) [22:36:14:589]: Custom Action Manager thread ending.Property(C): DiskPrompt = [1]Property(C): UpgradeCode = {39058B1C-DB70-4B21-9D96-6BCE3FF762DC}Property(C): ProductCode = {3C230D85-CB6A-47DA-A647-41CDE9F8E235}Property(C): PROCESS_EXISTS = NOProperty(C): EXISTING_EXTENSION_RCU = 0Property(C): OPROCESS_EXISTS = NOProperty(C): EXISTING_EXTENSION_VSC = 0Property(C): EXISTING_EXTENSION_NVPF = 0Property(C): CHECK_PROCESS_OK = 0Property(C): PORTSVALID = 1Property(C): PLUGIN_TYPE = 0Property(C): NON_HV_OS = 1Property(C): NO_SPACE_AVAILABLE = 0Property(C): CHECK_EXE_OK = 0Property(C): PrimaryVolumeSpaceRemaining = 0Property(C): PrimaryVolumeSpaceRequired = 0Property(C): PrimaryVolumeSpaceAvailable = 0Property(C): OutOfNoRbDiskSpace = 0Property(C): OutOfDiskSpace = 0Property(C): SourcedirProduct = {3C230D85-CB6A-47DA-A647-41CDE9F8E235}Property(C): SETUPEXECOUNT = NOProperty(C): CostingComplete = 1Property(C): ROOTDRIVE = C:\Property(C): SDCONFIG_LIB_PATH = C:\DOCUME~1\1\LOCALS~1\Temp\SDConfig.dllPy(C): CommonAppDataFolder = C:\Documents and Settings\All Users\Application Data\Property(C): TemplateFolder = C:\Documents and Settings\All Users\Templates\Property(C): HS_DYMC_CERT = nullProperty(C): HSFOLDERREMOVE = 1Property(C): ISCHECKFORPRODUCTUPDATES = 1Property(C): RCU1 = 0Property(C): RCU11 = 0Property(C): SD_AgentUI = 0Property(C): VSC1 = 0Property(C): NewProperty50 = 0Property(C): NewProperty51 = 0Property(C): ApplicationUsers = AllUsersProperty(C): NewProperty10 = 0Property(C): NewProperty11 = 0Property(C): NewProperty25 = 0Property(C): NewProperty195 = 0Property(C): NewProperty20 = 0Property(C): NewProperty26 = 0Property(C): NewProperty27 = 0Property(C): NewProperty37 = 0Property(C): AgentUI_SERVER_SSL_PORT = 8488Property(C): AgentUI_SERVER_COM_PORT = 8488Property(C): HS_MGM_PORT = 8799Property(C): HS_ADMIN_PORT = 8699Property(C): HS_FS_PORT = 8897Property(C): TCPIP_PORT = 808Property(C): HTTP_PORT = 4094Property(C): HTTPS_PORT = 4095Pro): SMHVINSTALLED = 0Property(C): SMVI_PLUGIN_PORT = 8044Property(C): SVCACCOUNTVALID = 1Property(C): SecureCustomProperties = ISFOUNDNEWERPRODUCTVERSION;USERNAME;COMPANYNAME;ISX_SERIALNUM;SUPPORTDIR;VSC1;RCU1;RCU11;SD_AgentUI;HS_MGM_PORT;HS_ADMIN_PORT;HS_FS_PORT;PLUGIN_PORT;TCPIP_PORT;HTTP_PORT;HTTPS_PORT;SVCUSERNAME;SVCCONFIRMUSERname;AgentUI_SKIP_VERIFY;AgentUI_SERVER_COM_PORT;AgentUI_SERVER_USERNAME;AgentUI_SERVER_SSL_PORT;AgentUI_SERVER_name;HSFOLDERREMOVE;AgentUI_SERVER_INFO;EXISTING_VSPHERE_EXTENSIONS_TEXT;VMWARE_PLUGIN_IP;VCENTER_IP;VCENTER_USERNAME;VCENTER_name;VCENTER_PORT;VC_SKIP_VERIFY;RemoveTempISFiles;AgentUI_SRV_LOGON_PASS;SMHVSRV_name;SMHVSRV_CONFIRMUSERname; SVCUSERname; SVCCONFIRMUSERname;AgentUI_SERVER_name;VCENTER_name;name;PSPOG_KEYSTORE_PASS;PSPOG_KEY_PASS;HS_DYMC_CERTProperty(C): SetupType = TypicalProperty(C): TRANSPORT_PRT_SELECTION = 1Property(C): VALID_AgentUI_SRV_DETECTED = 0Property(C): VCACCOUNTVALID = 1Property(C): VENDOR = KyoProperty(C): VMWAREUPGRADE = 1Property(C): VSC = 0Property(C): ISReleaseFlags = X86Property(C): SETUPEXENAME = ocInLine-setup-mainN_110425_1615-x86.exeProperty(C): MsiLogFileLocation = C:\DOCUME~1\1\LOCALS~1\Temp\MSI25c07.LOGProperty(C): VMPLUGINVALID = 1Property(C): SendToFolder = C:\Documents and Settings\1\SendTo\Property(C): RecentFolder = C:\Documents and Settings\1\Recent\Property(C): PrintHoodFolder = C:\Documents and Settings\1\PrintHood\Property(C): PersonalFolder = C:\Documents and Settings\1\My Documents\Property(C): NetHoodFolder = C:\Documents and Settings\1\NetHood\Property(C): FavoritesFolder = C:\Documents and Settings\1\Favorites\Property(C): AppDataFolder = C:\Documents and Settings\1\Application Data\Property(C): TempFolder = C:\DOCUME~1\1\LOCALS~1\Temp\Property(C): RemoteAdminTS = 1Property(C): SVCUSERNAME = VIM\1Property(C): SVCUSERname = **********Property(C): System16Folder = C:\WINDOWS\system\Property(C): SystemFolder = C:\WINDOWS\system32\Property(C): WindowsVolume = C:\Property(C): MsiNTSuiteEnterprise = 1Property(C): MsiNTProductType = 3Property(C): _BrowseProperty = INSTALLDIRProperty(C): ServicePackLevelMinor = 0Property(C): ServicePackLevel = 2Property(C): COMPANYNAME = KyoProperty(C): USERNAME = mvikramProperty(C): AgentUI_SKIP_VERIFY = 1Property(C): AgentUI_SERVER_INFO = AgentUI_IPProperty(C): AgentUI_SERVER_USERNAME = AgentUI_SERVER_USERNAMEProperty(C): WindowsBuild = 3790Property(C): PLUGIN_PORT = 8044Property(C): VersionMsi = 4.05Property(C): VersionDatabase = 200Property(C): CLIENTPROCESSID = 5904Property(C): CLIENTUILEVEL = 0Property(C): CURRENTDIRECTORY = C:\Documents and Settings\1\DesktopProperty(C): SETUPEXEDIR = C:\Documents and Settings\1\DesktopProperty(C): PackagecodeChanging = 1Property(C): ProductState = -1Property(C): PackageCode = {BBC4CBB2-5FC7-4683-B3C6-7CDFA4C96954}=== Logging stopped: 4/26/2011 22:36:14 ===MSI (c) (10:EC) [22:36:14:620]: Note: 1: 1707 MSI (c) (10:EC) [22:36:14:620]: Product: myproduct inLine Bud Service -- Installation operation completed successfully.MSI (c) (10:EC) [22:36:14:620]: Windows Installer installed the product. Product Name: myproduct inLine Bud Service. Product Version: 1.0. Product Language: 1033. Installation success or error status: 0.MSI (c) (10:EC) [22:36:14:636]: Grabbed execution mutex.MSI (c) (10:EC) [22:36:14:636]: Cleaning up uninstalled install packages, if any existMSI (c) (10:EC) [22:36:14:636]: MainEngineThread is returning 0=== Verbose logging stopped: 4/26/2011 22:36:14 ===推荐答案嗨 Sarfu，Hi Sarfu,有关InstallShield产品的问题，那么您需要将其发布在InstallShield论坛中获得更多专家帮助。For the question related to InstallShield product, then you need to post it in the InstallShield forum for more expert help. http://community.flexerasoftware.com/ forumdisplay.php？f = 133 祝福，这篇关于Chain Installer最后挂起。连锁MSI的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！ 1403页，肝出来的..