问题描述
Application Verifier表示运行代码时存在访问冲突:
Application Verifier says there is an access violation when running the code:
var
shi: TShellExecuteInfo;
begin
shi := Default(TShellExecuteInfo);
shi.cbSize := SizeOf(TShellExecuteInfo);
shi.lpFile := PChar('C:\Windows');
ShellExecuteEx(@shi);
end;
怎么了?
我正在应用程序下运行我的应用程序验证程序，启用了检测堆损坏的选项:
I'm running my application under the Application Verifier, with the option to detect heap corruption enabled:
- 堆:检查堆错误.
- Heaps: Checks the heap errors.
在调用 ShellExecuteEx 期间，出现异常，表明存在堆损坏.
During the call to ShellExecuteEx, an exception comes up, indicating that there is heap corruption.
在调试器中运行使我可以解码异常:
Running inside a debugger allows me to decode the exception:
ExceptionAddress: 0000000074b254ad (KERNELBASE!ParseURLW+0x000000000000002d)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000008e26fe8
Attempt to read from address 0000000008e26fe8
在调试器外部运行 ，应用程序崩溃(WerFault进行事后调查，该进程死亡).
Running outside a debugger, the application crashes (WerFault takes a post-mortem and the process dies).
代码有什么问题?
program ShellExecuteTestApp;
{$APPTYPE CONSOLE}
uses
System.SysUtils,
Winapi.ShellAPI;
var
shi: TShellExecuteInfo;
begin
try
shi := Default(TShellExecuteInfo);
shi.cbSize := SizeOf(TShellExecuteInfo);
shi.lpFile := PChar('C:\Windows');
WriteLn('shi.cbSize: '+IntToStr(shi.cbSize));
WriteLn('shi.lpFile: "'+shi.lpFile+'"');
ShellExecuteEx(@shi);
except
on E: Exception do
Writeln(E.ClassName, ': ', E.Message);
end;
end.
崩溃前，它输出:
shi.cbSize: 60
shi.lpFile: "C:\Windows"
我认为这可能是 CreateProcess 中的常见错误，所以我确保lpFile是可写的:
I thought perhaps it was the common bug from CreateProcess, so i made sure the lpFile was writable:
var
file: string;
shi: TShellExecuteInfo;
begin
file := 'C:\Windows';
UniqueString({var} file);
shi := Default(TShellExecuteInfo);
shi.cbSize := SizeOf(TShellExecuteInfo);
shi.lpFile := PChar(file);
ShellExecuteEx(@shi);
end;
内存转储
使用32位版本(以使指针更易于阅读)，将内存传递给 ShellExecuteEx
00423EBC 0000003C cbSize 60 bytes
00000000 fMask SEE_MASK_DEFAULT
00000000 Wnd null
00000000 lpVerb null
0041C600 lpFile ==> 0x0041C60C
00000000 lpParameters null
00000000 lpDirectory null
00000001 nShow SW_NORMAL
00000000 hInstApp 0
00000000 lpIDList null
00000000 lpClass null
00000000 hkeyClass 0
00000000 dwHotKey 0
00000000 hMonitor null
00000000 hProcess null
一个指向宽字符的指针:
With the one pointer to a wide char:
0041C60C 43 00 3A 00 5C 00 57 00 C.:.\.W.
0041C614 69 00 6E 00 64 00 6F 00 i.n.d.o.
0041C61C 77 00 73 00 00 00 00 00 w.s.....
然后调用:
ShellExecuteTestApp.dpr.29: ShellExecuteEx(@shi);
0041C51F 68BC3E4200 push $00423ebc ;push address of shi structure
0041C524 E85BD6FFFF call ShellExecuteEx ;call imported function
Winapi.ShellAPI.pas.1798: function ShellExecuteEx; external shell32 name 'ShellExecuteExW';
00419B84 FF250C444200 jmp dword ptr [$0042440c] ;jump to ShellExecuteW inside shell32
shell32.ShellExecuteExW:
75520060 8BFF mov edi,edi
75520062 55 push ebp
75520063 8BEC mov ebp,esp
75520065 83E4F8 and esp,-$08
75520068 51 push ecx
75520069 53 push ebx
7552006A 56 push esi
7552006B 8B7508 mov esi,[ebp+$08]
7552006E 57 push edi
7552006F 833E3C cmp dword ptr [esi],$3c
75520072 7540 jnz $755200b4
75520074 8B5E04 mov ebx,[esi+$04]
75520077 F7C300011000 test ebx,$00100100
7552007D 7427 jz $755200a6
7552007F 8BCE mov ecx,esi
75520081 E836000000 call $755200bc --> failure is this way
然后有很多我无法理解的东西，直到错误最终在 ParseUrlW :
And then there's a lot of stuff i can't follow, until the error finally happens in ParseUrlW:
HRESULT ParseURL(
_In_ LPCTSTR pcszUrl,
_Inout_ PARSEDURL *ppu
);
带转储:
KERNELBASE.ParseURLW:
74B25480 8BFF mov edi,edi
74B25482 55 push ebp
74B25483 8BEC mov ebp,esp ;save stack pointer
74B25485 8B4508 mov eax,[ebp+$08] ;restore pcszUrl into EAX
74B25488 83EC0C sub esp,$0c
74B2548B 85C0 test eax,eax ;test that pcszUrl param supplied
74B2548D 0F8493010000 jz $74b25626
注意:目前，包含地址0x0908BFE8:
Note: At this moment contains address 0x0908BFE8:
0908BFE8: 00 00 00 00 00 00 00 00 ........
提供的pcszUrl字符串为空?实际上不，该地址无效.但是直到代码尝试触及它之前我们还不知道
The supplied pcszUrl string is empty? Actually no, the address is invalid. But we don't know that yet until the code tries to touch it
74B25493 57 push edi ;save EDI
74B25494 8B7D0C mov edi,[ebp+$0c] ;get PARSEDURL into edi
74B25497 85FF test edi,edi
74B25499 0F8410630300 jz $74b5b7af
注意:目前，包含0977FBDC
Note: At this moment contains 0977FBDC
PARSEDURL structure
0977FBCD 00000018 cbSize 24 bytes
753F5BC0 pszProtocol [uninitialized junk]
0977FEC4 cchProtocol [uninitialized junk]
092ECFC8 pszSuffix [uninitialized junk]
78E6E41E cchSuffix [uninitialized junk]
0977FE98 nScheme [uninitialized junk]
74B2549F 833F18 cmp dword ptr [edi],$18 ;test that struct size is what we expect (24 bytes)
74B254A2 0F8507630300 jnz $74b5b7af
74B254A8 53 push ebx ;save ebx
74B254A9 8BD0 mov edx,eax ;save pcszUrl into edx
74B254AB 33DB xor ebx,ebx
74B254AD 0FB700 movzx eax,[eax] ;Attempt to copy 4 bytes of the string into EAX (access violation)
代码尝试使用以零扩展的方式移动.但是该地址无效，从而导致访问冲突:
The code tries to copy the first word from 0x0908BFE8 using Move with Zero-Extend. But that address is invalid, giving the access violation:
因此，在 ShellExecuteExW 代码的某处，它设置了对 ParseUrlW 的无效调用.
So somewhere in the code of ShellExecuteExW, it sets up an invalid call to ParseUrlW.
32位WinDbg，调试32位应用程序，带有符号:
32-bit WinDbg, debugging 32-bit application, with symbols:
*******************************************************************************
* *
* Exception Analysis *
* *
*******************************************************************************
*** ERROR: Module load completed but symbols could not be loaded for image00400000
FAULTING_IP:
KERNELBASE!ParseURLW+2d
74b254ad 0fb700 movzx eax,word ptr [eax]
EXCEPTION_RECORD: ffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 74b254ad (KERNELBASE!ParseURLW+0x0000002d)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 00000000
Parameter[1]: 07634fe8
Attempt to read from address 07634fe8
CONTEXT: 00000000 -- (.cxr 0x0;r)
eax=07634fe8 ebx=00000000 ecx=07634fe8 edx=07634fe8 esi=00000000 edi=093dfbdc
eip=74b254ad esp=093dfbb4 ebp=093dfbc8 iopl=0 nv up ei pl zr na pe nc
cs=0023 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010246
KERNELBASE!ParseURLW+0x2d:
74b254ad 0fb700 movzx eax,word ptr [eax] ds:002b:07634fe8=????
FAULTING_THREAD: 00003ff4
DEFAULT_BUCKET_ID: INVALID_POINTER_READ
PROCESS_NAME: image00400000
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%p referenced memory at 0x%p. The memory could not be %s.
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%p referenced memory at 0x%p. The memory could not be %s.
EXCEPTION_PARAMETER1: 00000000
EXCEPTION_PARAMETER2: 07634fe8
READ_ADDRESS: 07634fe8
FOLLOWUP_IP:
shell32!GetUrlSchemeW+28
754c66be 85c0 test eax,eax
NTGLOBALFLAG: 2000100
APPLICATION_VERIFIER_FLAGS: 80000001
APP: image00400000
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) x86fre
PRIMARY_PROBLEM_CLASS: INVALID_POINTER_READ
BUGCHECK_STR: APPLICATION_FAULT_INVALID_POINTER_READ
LAST_CONTROL_TRANSFER: from 754c66be to 74b254ad
STACK_TEXT:
093dfbc8 754c66be 07634fe8 093dfbdc 00000000 KERNELBASE!ParseURLW+0x2d
093dfbf8 75522df8 0746fff0 07604f68 00000002 shell32!GetUrlSchemeW+0x28
093dfe98 75522b1a 093dfec4 00000000 0746fff0 shell32!CShellExecute::CreateParsingBindCtx+0x1d6
093dfecc 755224da 00000000 0746fff0 00000000 shell32!CShellExecute::ParseOrValidateTargetIdList+0x37
093dfef0 7551fd5a 093dff80 768b983a 07604f68 shell32!CShellExecute::_DoExecute+0x40
093dfef8 768b983a 07604f68 768b9770 768b9770 shell32!<lambda_e76b82c5cb7f9f82cbe0fd97ad5190bf>::<lambda_invoker_stdcall>+0x1a
093dff80 73d08484 0019fd94 73d08460 21439000 shcore!_WrapperThreadProc+0xca
093dff94 772c2fea 0019fd94 25ae5778 00000000 KERNEL32!BaseThreadInitThunk+0x24
093dffdc 772c2fba ffffffff 772dec22 00000000 ntdll!__RtlUserThreadStart+0x2f
093dffec 00000000 768b9770 0019fd94 00000000 ntdll!_RtlUserThreadStart+0x1b
STACK_COMMAND: .cxr 0x0 ; kb
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: shell32!GetUrlSchemeW+28
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: shell32
IMAGE_NAME: shell32.dll
DEBUG_FLR_IMAGE_TIMESTAMP: 0
FAILURE_BUCKET_ID: INVALID_POINTER_READ_c0000005_shell32.dll!GetUrlSchemeW
BUCKET_ID:
APPLICATION_FAULT_INVALID_POINTER_READ_shell32!GetUrlSchemeW+28
ANALYSIS_SOURCE: UM
FAILURE_ID_HASH_STRING: um:invalid_pointer_read_c0000005_shell32.dll!geturlschemew
FAILURE_ID_HASH: {89d9bcf0-5ef6-4e90-df6b-f05dc028e062}
Followup: MachineOwner
---------
奖金阅读
- 在delphi7中执行访问冲突ShellExecute
- Access Violation ShellExecute in delphi7
- 我只遇到它是因为应用程序验证程序被捕获了它.
- 这是您实际上曾经在野外遇到过的机会有千百万
- I only encountered it because Application Verifier caught it.
- it's a one-in-a-million chance that you'd actually ever encounter it in the wild
Bonus Reading
推荐答案
正如@RaymondChen所说，这是Windows 10中的错误.
As @RaymondChen said, it's a bug in Windows 10.
雷蒙德太谦虚了，不能接受声誉.所以我用他的答案作为自己的答案.
Raymond's too modest to accept reputation; so i use his answer as my own.
这篇关于应用程序验证程序在对ShellExecuteEx的调用中报告访问冲突的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！