更改音频采样率，通过这个code目前改变位深度？

本文介绍了更改音频采样率，通过这个code目前改变位深度？的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！

问题描述

好吧couldn't想出了一个很好的话题。

Okay couldn´t come up with a good topic.

问题的关键是，我有一个code，我得到了与that's更改位深度从32位系统到16位的帮助，不知道它是如何工作的，但我认为它只是简单地删除所有其他位，没有什么花哨

The point is, i have a code which i got help with that´s changing the bit depth from 32bit to 16bit, not sure how it works, but i think it simply just removes every other bit, nothing fancy.

因此，如果汇入作业可能做到这一点与code，它应该可能改变采样率。
另外我不想要的东西，看中这里作为更汇入作业用于调试的用途，我只想把它做成一些其他的采样率，它doesn't必须是一个重采样。

So if it´s possible to do that with the code, it should be possible to change the samplerate.Also i don´t want something fancy here as it´s more for debugging uses, i just want to make it into some other samplerate, it doesn´t have to be a "resampling".

含义，例如，如果音频为48kHz，我重新取样它，而它起着至47khz，它不需额外声音一样，它仍然认为48kHz的汇入作业，这意味着它将发挥更慢。

Meaning for example, if the audio is 48khz, and i resample it while it plays to 47khz, it won´t sound the same as it still think it´s 48khz, meaning it will play it slower.

因此，换句话说我要去使用它用于改变音频的速度在一个很简单的方法

So in other words i am going to use it for changing the speed of the audio in a very simple way.

这里是code键更改位深，我希望能为这个被重用。

here is the code to change bit depth which i hope can be reused for this.

Int32 bytesrecorded = e.BytesRecorded;
byte[] newArray16Bit = new byte[bytesrecorded / 2];
fixed (byte* sourcePtr = e.Buffer)
fixed (byte* targetPtr = newArray16Bit)
{
    float* sourceTyped = (float*)sourcePtr;
    short* targetTyped = (short*)targetPtr;

    Int32 count = bytesrecorded / 4;
    for (int i = 0; i < count; i++)
    {
        targetTyped[i] = (Int16)(sourceTyped[i] * Int16.MaxValue);
    }
}

e.Bytesrecorded =音频缓冲区的大小，

e.Bytesrecorded = the size of the audio buffer,

e.Buffer =实际的缓冲

由于我不完全理解这一点，我只是看一下/ 2，并假设它只是把规模考核的长度，则/ 4部分将围绕移动字节，使其适合。

As i don´t fully understand this, i simply look at the /2 and assume it just divides teh length of the size, then the /4 part will be moving the bytes around to make it fit.

虽然我不知道我可以用它来改变采样率，因为这只是个字节走动，它shouldn't是努力使事情的采样率。

Though i don´t know how i can use this to change the samplerate, as this is just bytes moving around, it shouldn´t be to hard to make something for the samplerate.

感谢

更改音频采样率

更改音频采样率，通过这个code目前改变位深度？

问题描述

推荐答案