一、安装RabbitMQ
安装rabbitmq所需的erlang软件包，方法有二（编译和yum安装），这里采用yum安装
vim /etc/yum.repos.d/rabbitmq-erlang.repo
#插入如下代码
[rabbitmq-erlang]
name=rabbitmq-erlang
baseurl=https://dl.bintray.com/rabbitmq/rpm/erlang/20/el/7
gpgcheck=1
gpgkey=https://dl.bintray.com/rabbitmq/Keys/rabbitmq-release-signing-key.asc
repo_gpgcheck=0
enabled=1
#清除yum缓存并重新生成缓存
yum clean all && yum makecache安装erlang/socat
yum install erlang socat -y安装rabbitmq
rpm -Uvh https://dl.bintray.com/rabbitmq/all/rabbitmq-server/3.7.3/rabbitmq-server-3.7.3-1.el7.noarch.rpm#启动rabbitmq服务
systemctl start rabbitmq-server
#将rabbitmq设置为开机启动
systemctl enable rabbitmq-server
#查看rabbitmq运行状态
systemctl status rabbitmq-server创建rabbitmq用户
#添加用户
rabbitmqctl add_user 用户名 密码
#设置用户角色
rabbitmq set_user_tags admin administrator
#tag（administrator，monitoring，policymaker，management）
#设置用户权限(接受来自所有Host的所有操作)
sudo rabbitmqctl set_permissions -p "/" admin '.*' '.*' '.*'
#查看用户权限
sudo rabbitmqctl list_user_permissions admin配置远程访问
#修改配置文件，
sudo vi /etc/rabbitmq/rabbitmq.config
#保存以下内容
[
{rabbit, [{tcp_listeners, [5672]},
{loopback_users, ["admin"]}]}
].模块开放
#开放shovel模块和shovel_management管理模块
rabbitmq-plugins enable rabbitmq_shovel
rabbitmq-plugins enable rabbitmq_shovel_management查看已开放的模块
[root@rabbitmq bin]# rabbitmq-plugins list
Configured: E = explicitly enabled; e = implicitly enabled
| Status: * = running on rabbit@rabbitmq
|/
[e*] rabbitmq_amqp1_0 3.7.3
[ ] rabbitmq_auth_backend_cache 3.7.3
[ ] rabbitmq_auth_backend_http 3.7.3
[ ] rabbitmq_auth_backend_ldap 3.7.3
[ ] rabbitmq_auth_mechanism_ssl 3.7.3
[ ] rabbitmq_consistent_hash_exchange 3.7.3
[ ] rabbitmq_event_exchange 3.7.3
[ ] rabbitmq_federation 3.7.3
[ ] rabbitmq_federation_management 3.7.3
[ ] rabbitmq_jms_topic_exchange 3.7.3
[e*] rabbitmq_management 3.7.3
[e*] rabbitmq_management_agent 3.7.3
[ ] rabbitmq_mqtt 3.7.3
[ ] rabbitmq_peer_discovery_aws 3.7.3
[ ] rabbitmq_peer_discovery_common 3.7.3
[ ] rabbitmq_peer_discovery_consul 3.7.3
[ ] rabbitmq_peer_discovery_etcd 3.7.3
[ ] rabbitmq_peer_discovery_k8s 3.7.3
[ ] rabbitmq_random_exchange 3.7.3
[ ] rabbitmq_recent_history_exchange 3.7.3
[ ] rabbitmq_sharding 3.7.3
[E*] rabbitmq_shovel 3.7.3
[E*] rabbitmq_shovel_management 3.7.3
[ ] rabbitmq_stomp 3.7.3
[ ] rabbitmq_top 3.7.3
[ ] rabbitmq_tracing 3.7.3
[ ] rabbitmq_trust_store 3.7.3
[e*] rabbitmq_web_dispatch 3.7.3
[ ] rabbitmq_web_mqtt 3.7.3
[ ] rabbitmq_web_mqtt_examples 3.7.3
[ ] rabbitmq_web_stomp 3.7.3
[ ] rabbitmq_web_stomp_examples 3.7.3防火墙开放端口
firewall-cmd --zone=public --add-port=15672/tcp --permanent #permanent为永久生效
#重新加载防火墙
firewall-cmd --reload附上rabbitmq常用命令
# 添加用户
sudo rabbitmqctl add_user <username> <password>
# 删除用户
sudo rabbitmqctl delete_user <username>
# 修改用户密码
sudo rabbitmqctl change_password <username> <newpassword>
# 清除用户密码（该用户将不能使用密码登陆，但是可以通过SASL登陆如果配置了SASL认证）
sudo rabbitmqctl clear_password <username>
# 设置用户tags（相当于角色，包含administrator，monitoring，policymaker，management）
sudo rabbitmqctl set_user_tags <username> <tag>
# 列出所有用户
sudo rabbitmqctl list_users
# 创建一个vhosts
sudo rabbitmqctl add_vhost <vhostpath>
# 删除一个vhosts
sudo rabbitmqctl delete_vhost <vhostpath>
# 列出vhosts
sudo rabbitmqctl list_vhosts [<vhostinfoitem> ...]
# 针对一个vhosts给用户赋予相关权限；
sudo rabbitmqctl set_permissions [-p <vhostpath>] <user> <conf> <write> <read>
# 清除一个用户对vhosts的权限；
sudo rabbitmqctl clear_permissions [-p <vhostpath>] <username>
# 列出哪些用户可以访问该vhosts；
sudo rabbitmqctl list_permissions [-p <vhostpath>]
# 列出用户访问权限；
sudo rabbitmqctl list_user_permissions <username>二、配置shovel模块
登陆web界面配置shovel
开始配置
将对应的信息填好，这里注意，因为我们建vhost的时候一般喜欢带个“/”，但是，在uri中直接填“/”他会当成路径来处理，所以这个地方要用%2f来转义。其它的就是将你源队列及目录队列信息填好，然后添加即可。
amqp://username:passwd@IP:端口/%2fVhost配置完成后在shovel status里面查看状态，如果是runing表示配置成功。如果是terminated则表示配置有问题，请根据日志分析错误
URI参照一下示例
amqp://
connect to local server as default user
amqp://user@/my-vhost
connect to local server with alternate user and virtual host (passwords are not required for local connections)
amqp://server-name
connect to server-name, without SSL and default credentials
amqp://user:password@server-name/my-vhost
connect to server-name, with credentials and overridden virtual host
amqps://user:password@server-name?cacertfile=/path/to/cacert.pem&certfile=/path/to/cert.pem&keyfile=/path/to/key.pem&verify=verify_peer
connect to server-name, with credentials and SSL
amqps://server-name?cacertfile=/path/to/cacert.pem&certfile=/path/to/cert.pem&keyfile=/path/to/key.pem&verify=verify_peer&fail_if_no_peer_cert=true&auth_mechanism=external
connect to server-name, with SSL and EXTERNAL authentication附：RabbitMQ远程不能访问问题的解决
修改rabbitmq.config.example，将以下两项前面的%去掉，保存然后重启服务即可。参考来源
{tcp_listeners, [5672]},
{loopback_users, ["admin"]},