本文介绍了如何使用Travis-CI在CentOS 7上运行测试？的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我尝试使用。
我收到错误：
有没有办法在CentOS 7上运行ansible playbook测试？
所以我更新了/ etc / default / docker：
DOCKER_OPTS = - s devicemapper
重新启动docker：
service docker restart
docker run --rm = true -ti centos：7 / bin / bash
[root @ 16702cbf3f2c /]＃yum install -y httpd
加载的插件：fastestmirror
base | 3.6 kB 00:00:00
extras | 3.4 kB 00:00:00
systemdcontainer | 1.9 kB 00:00:00
更新| 3.4 kB 00:00:00
（1/4）：base / 7 / x86_64 / group_gz | 154 kB 00:00:03
（2/4）：extras / 7 / x86_64 / primary_db | 74 kB 00:00:04
（3/4）：updates / 7 / x86_64 / primary_db | 3.3 MB 00:01:10
（4/4）：base / 7 / x86_64 / primary_db | 5.1 MB 00:01:22
systemdcontainer / primary_db | 20 kB 00:00:01
确定最快镜像
* base：centos.syn.co.il
* extras：centos.syn.co.il
*更新：centos .syn.co.il
解析依赖关系
- >运行交易支票
--->软件包httpd.x86_64 0：2.4.6-31.el7.centos.1将被安装
- >处理依赖关系：httpd-tools = 2.4.6-31.el7.centos.1 for package：httpd-2.4.6-31.el7.centos.1.x86_64
- >处理依赖关系：system-logos> = 7.92.1-1包：httpd-2.4.6-31.el7.centos.1.x86_64
- >处理依赖关系：/etc/mime.types包：httpd-2.4.6-31.el7.centos.1.x86_64
- >处理依赖关系：libaprutil-1.so.0（）（64位）包：httpd-2.4.6-31.el7.centos.1.x86_64
- >处理依赖关系：libapr-1.so.0（）（64位）包：httpd-2.4.6-31.el7.centos.1.x86_64
- >运行交易支票
--->软件包apr.x86_64 0：1.4.8-3.el7将被安装
--->软件包apr-util.x86_64 0：1.5.2-6.el7将被安装
--->软件包centos-logos.noarch 0：70.0.6-2.el7.centos将被安装
--->软件包httpd-tools.x86_64 0：2.4.6-31.el7.centos.1将被安装
--->软件包mailcap.noarch 0：2.1.41-2.el7将被安装
- >已完成的依赖解决方案
已解决的依赖关系
========================= ================================================== $ {
}软件包版本存储库大小
===================================== ================================================== ================================
安装：
httpd x86_64 2.4.6- 31.el7.centos.1更新2.7 M
为依赖安装：
apr x86_64 1.4.8-3.el7 base 103 k
apr-util x86_64 1.5.2-6.el7 base 92 k
centos-logos noarch 70.0.6-2.el7.centos更新21 M
httpd-tools x86_64 2.4.6-31.el7.centos.1更新79 k
mailcap noarch 2.1.41-2.el7 base 31 k
事务总结
========================================= ================================================== ============================
安装1个软件包（+5个相关软件包）
总下载大小：24 M
安装尺寸：32 M
下载包：
warning：/var/cache/yum/x86_64/7/updates/packages/httpd-tools-2.4。 6-31.el7.centos.1.x86_64.rpm：标题V3 RSA / SHA256签名，密钥ID f4a80eb5：NOKEY
httpd-tools-2.4.6-31.el7.centos.1.x86_64的公钥.rpm没有安装
（1/6）：httpd-tools-2.4.6-31.el7.centos.1.x86_64.rpm | 79 kB 00:00:03
未安装apr-util-1.5.2-6.el7.x86_64.rpm的公钥
（2/6）：apr-util-1.5.2- 6.el7.x86_64.rpm | 92 kB 00:00:04
（3/6）：mailcap-2.1.41-2.el7.noarch.rpm | 31 kB 00:00:02
（4/6）：apr-1.4.8-3.el7.x86_64.rpm | 103 kB 00:00:06
（5/6）：httpd-2.4.6-31.el7.centos.1.x86_64.rpm | 2.7 MB 00:00:52
（6/6）：centos-logos-70.0.6-2.el7.centos.noarch.rpm | 21 MB 00:01:11
--------------------------------------- -------------------------------------------------- ------------------------------------
总计349 kB / s | 24 MB 00:01:11
从文件中获取密钥：/// etc / pki / rpm-gpg / RPM-GPG-KEY-CentOS-7
导入GPG密钥0xF4A80EB5：
用户名：CentOS-7密钥（CentOS 7官方签名密钥）< [email protected]>
指纹：6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5
包装：centos-release-7-1.1503.el7.centos.2.8.x86_64（@CentOS）
从：/ etc / pki / rpm-gpg / RPM-GPG-KEY-CentOS-7
运行事务检查
运行事务测试
事务测试成功
运行事务
安装：apr- 1.4.8-3.el7.x86_64 1/6
安装：apr-util-1.5.2-6.el7.x86_64 2/6
安装：httpd-tools-2.4.6-31。 el7.centos.1.x86_64 3/6
安装：mailcap-2.1.41-2.el7.noarch 4/6
安装：centos-logos-70.0.6-2.el7.centos。 noarch 5/6
安装：httpd-2.4.6 -31.el7.centos.1.x86_64 6/6
验证：centos-logos-70.0.6-2.el7.centos.noarch 1/6
验证：apr-1.4.8-3 .el7.x86_64 2/6
验证：mailcap-2.1.41-2.el7.noarch 3/6
验证：apr-util-1.5.2-6.el7.x86_64 4/6
验证：httpd-tools-2.4.6-31.el7.centos.1.x86_64 5/6
验证：httpd-2.4.6-31.el7.centos.1.x86_64 6/6
已安装：
httpd.x86_64 0：2.4.6-31.el7.centos.1
依赖关系已安装：
apr.x86_64 0：1 。 4.8-3.el7 apr-util.x86_64 0：1.5.2-6.el7 centos-logos.noarch 0：70.0.6-2.el7.centos
httpd-tools.x86_64 0：2.4.6- 31.el7.centos.1 mailcap.noarch 0：2.1.41-2.el7
完成！
如果有可能在Travis CI上执行相同操作。我没有在手册中找到。
我无法编辑docker设置：
$ echo'DOCKER_OPTS = - s devicemapper'>>的/ etc /默认/搬运工; service docker restart
/home/travis/build.sh：第41行：/ etc / default / docker：Permission denied
/etc/init.d/docker：38：。：无法打开/ etc / default / docker
解决方案
由于Travis CI Docker bug有办法使用新版本的Docker。感谢Travis CI团队的Dominic Jodoin。
.travis.yml：
sudo：required
env：
#matrix：
- OS_TYPE = centos OS_VERSION = 6 ANSIBLE_VERSION = 1.9.2
branches：
only：
- master
＃ - stable
服务：
- docker
before_install：
- sudo apt-get update
- sudo apt-get upgrade lxc-docker
- echo' DOCKER_OPTS = - H tcp：//127.0.0.1：2375 -H unix：///var/run/docker.sock -s devicemapper'| sudo tee / etc / default / docker> / dev / null
- sudo service docker restart
- sleep 5
- sudo docker pull weldpua2008 / docker-ansible：$ {OS_TYPE} $ {OS_VERSION} _v $ {ANSIBLE_VERSION}
脚本：
＃在Container
运行测试 - sudo docker运行--rm = true -v`pwd`：/ ansible-apache：rw weldpua2008 / docker-ansible：$ {OS_TYPE } $ {OS_VERSION} _v $ {ANSIBLE_VERSION} / bin / bash -c/ansible-apache/tests/test-in-docker-image.sh $ {OS_TYPE} $ {OS_VERSION} $ {ANSIBLE_VERSION}
通知：
电子邮件：false
I try to use Travis-CI to test my ansible playbooks on CentOS 7.
I got an error:error: unpacking of archive failed on file /usr/sbin/suexec: cpio: cap_set_file.
Also I installed docker with:
curl -sSL https://get.docker.com/ | sh
on my Ubuntu:
# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 14.04.3 LTS
Release: 14.04
Codename: trusty
But there is this error:
#docker run --rm=true -ti centos:7 /bin/bash
[root@08bf52d53465 /]#
[root@ca03cf7a13e2 /]# yum install httpd -y
Loaded plugins: fastestmirror
base | 3.6 kB 00:00:00
extras | 3.4 kB 00:00:00
updates | 3.4 kB 00:00:00
(1/4): extras/7/x86_64/primary_db | 74 kB 00:00:00
(2/4): base/7/x86_64/group_gz | 154 kB 00:00:01
(3/4): updates/7/x86_64/primary_db | 3.3 MB 00:00:06
(4/4): base/7/x86_64/primary_db | 5.1 MB 00:00:06
Determining fastest mirrors
* base: mirror.nonstop.co.il
* extras: centos.joinweb.co.il
* updates: centos.joinweb.co.il
Resolving Dependencies
--> Running transaction check
---> Package httpd.x86_64 0:2.4.6-31.el7.centos.1 will be installed
--> Processing Dependency: httpd-tools = 2.4.6-31.el7.centos.1 for package: httpd-2.4.6-31.el7.centos.1.x86_64
--> Processing Dependency: system-logos >= 7.92.1-1 for package: httpd-2.4.6-31.el7.centos.1.x86_64
--> Processing Dependency: /etc/mime.types for package: httpd-2.4.6-31.el7.centos.1.x86_64
--> Processing Dependency: libaprutil-1.so.0()(64bit) for package: httpd-2.4.6-31.el7.centos.1.x86_64
--> Processing Dependency: libapr-1.so.0()(64bit) for package: httpd-2.4.6-31.el7.centos.1.x86_64
--> Running transaction check
---> Package apr.x86_64 0:1.4.8-3.el7 will be installed
---> Package apr-util.x86_64 0:1.5.2-6.el7 will be installed
---> Package centos-logos.noarch 0:70.0.6-2.el7.centos will be installed
---> Package httpd-tools.x86_64 0:2.4.6-31.el7.centos.1 will be installed
---> Package mailcap.noarch 0:2.1.41-2.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================
Package Arch Version Repository Size
=============================================================================================================================
Installing:
httpd x86_64 2.4.6-31.el7.centos.1 updates 2.7 M
Installing for dependencies:
apr x86_64 1.4.8-3.el7 base 103 k
apr-util x86_64 1.5.2-6.el7 base 92 k
centos-logos noarch 70.0.6-2.el7.centos updates 21 M
httpd-tools x86_64 2.4.6-31.el7.centos.1 updates 79 k
mailcap noarch 2.1.41-2.el7 base 31 k
Transaction Summary
=============================================================================================================================
Install 1 Package (+5 Dependent packages)
Total download size: 24 M
Installed size: 32 M
Downloading packages:
warning: /var/cache/yum/x86_64/7/base/packages/apr-1.4.8-3.el7.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
Public key for apr-1.4.8-3.el7.x86_64.rpm is not installed
(1/6): apr-1.4.8-3.el7.x86_64.rpm | 103 kB 00:00:00
(2/6): mailcap-2.1.41-2.el7.noarch.rpm | 31 kB 00:00:00
(3/6): apr-util-1.5.2-6.el7.x86_64.rpm | 92 kB 00:00:00
Public key for httpd-tools-2.4.6-31.el7.centos.1.x86_64.rpm is not installed ] 559 kB/s | 764 kB 00:00:43 ETA
(4/6): httpd-tools-2.4.6-31.el7.centos.1.x86_64.rpm | 79 kB 00:00:01
(5/6): httpd-2.4.6-31.el7.centos.1.x86_64.rpm | 2.7 MB 00:00:03
(6/6): centos-logos-70.0.6-2.el7.centos.noarch.rpm | 21 MB 00:00:16
-----------------------------------------------------------------------------------------------------------------------------
Total 1.5 MB/s | 24 MB 00:00:16
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Importing GPG key 0xF4A80EB5:
Userid : "CentOS-7 Key (CentOS 7 Official Signing Key) <[email protected]>"
Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5
Package : centos-release-7-1.1503.el7.centos.2.8.x86_64 (@CentOS)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : apr-1.4.8-3.el7.x86_64 1/6
Installing : apr-util-1.5.2-6.el7.x86_64 2/6
Installing : httpd-tools-2.4.6-31.el7.centos.1.x86_64 3/6
Installing : mailcap-2.1.41-2.el7.noarch 4/6
Installing : centos-logos-70.0.6-2.el7.centos.noarch 5/6
Installing : httpd-2.4.6-31.el7.centos.1.x86_64 6/6
Error unpacking rpm package httpd-2.4.6-31.el7.centos.1.x86_64
error: unpacking of archive failed on file /usr/sbin/suexec: cpio: cap_set_file
error: httpd-2.4.6-31.el7.centos.1.x86_64: install failed
Verifying : centos-logos-70.0.6-2.el7.centos.noarch 1/6
Verifying : apr-1.4.8-3.el7.x86_64 2/6
Verifying : mailcap-2.1.41-2.el7.noarch 3/6
Verifying : apr-util-1.5.2-6.el7.x86_64 4/6
Verifying : httpd-tools-2.4.6-31.el7.centos.1.x86_64 5/6
Verifying : httpd-2.4.6-31.el7.centos.1.x86_64 6/6
Dependency Installed:
apr.x86_64 0:1.4.8-3.el7 apr-util.x86_64 0:1.5.2-6.el7 centos-logos.noarch 0:70.0.6-2.el7.centos
httpd-tools.x86_64 0:2.4.6-31.el7.centos.1 mailcap.noarch 0:2.1.41-2.el7
Failed:
httpd.x86_64 0:2.4.6-31.el7.centos.1
Complete!
[root@ca03cf7a13e2 /]#
I created "special" docker image that includes an Ansible https://github.com/weldpua2008/docker-ansible/blob/ansible_1.9.2/centos/7/Dockerfile
Is there any possibilities to run tests of ansible playbook on CentOS 7?
So I updated /etc/default/docker with:
DOCKER_OPTS="-s devicemapper"
restarted docker: service docker restart
docker run --rm=true -ti centos:7 /bin/bash
[root@16702cbf3f2c /]# yum install -y httpd
Loaded plugins: fastestmirror
base | 3.6 kB 00:00:00
extras | 3.4 kB 00:00:00
systemdcontainer | 1.9 kB 00:00:00
updates | 3.4 kB 00:00:00
(1/4): base/7/x86_64/group_gz | 154 kB 00:00:03
(2/4): extras/7/x86_64/primary_db | 74 kB 00:00:04
(3/4): updates/7/x86_64/primary_db | 3.3 MB 00:01:10
(4/4): base/7/x86_64/primary_db | 5.1 MB 00:01:22
systemdcontainer/primary_db | 20 kB 00:00:01
Determining fastest mirrors
* base: centos.syn.co.il
* extras: centos.syn.co.il
* updates: centos.syn.co.il
Resolving Dependencies
--> Running transaction check
---> Package httpd.x86_64 0:2.4.6-31.el7.centos.1 will be installed
--> Processing Dependency: httpd-tools = 2.4.6-31.el7.centos.1 for package: httpd-2.4.6-31.el7.centos.1.x86_64
--> Processing Dependency: system-logos >= 7.92.1-1 for package: httpd-2.4.6-31.el7.centos.1.x86_64
--> Processing Dependency: /etc/mime.types for package: httpd-2.4.6-31.el7.centos.1.x86_64
--> Processing Dependency: libaprutil-1.so.0()(64bit) for package: httpd-2.4.6-31.el7.centos.1.x86_64
--> Processing Dependency: libapr-1.so.0()(64bit) for package: httpd-2.4.6-31.el7.centos.1.x86_64
--> Running transaction check
---> Package apr.x86_64 0:1.4.8-3.el7 will be installed
---> Package apr-util.x86_64 0:1.5.2-6.el7 will be installed
---> Package centos-logos.noarch 0:70.0.6-2.el7.centos will be installed
---> Package httpd-tools.x86_64 0:2.4.6-31.el7.centos.1 will be installed
---> Package mailcap.noarch 0:2.1.41-2.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================
Package Arch Version Repository Size
=============================================================================================================================
Installing:
httpd x86_64 2.4.6-31.el7.centos.1 updates 2.7 M
Installing for dependencies:
apr x86_64 1.4.8-3.el7 base 103 k
apr-util x86_64 1.5.2-6.el7 base 92 k
centos-logos noarch 70.0.6-2.el7.centos updates 21 M
httpd-tools x86_64 2.4.6-31.el7.centos.1 updates 79 k
mailcap noarch 2.1.41-2.el7 base 31 k
Transaction Summary
=============================================================================================================================
Install 1 Package (+5 Dependent packages)
Total download size: 24 M
Installed size: 32 M
Downloading packages:
warning: /var/cache/yum/x86_64/7/updates/packages/httpd-tools-2.4.6-31.el7.centos.1.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
Public key for httpd-tools-2.4.6-31.el7.centos.1.x86_64.rpm is not installed
(1/6): httpd-tools-2.4.6-31.el7.centos.1.x86_64.rpm | 79 kB 00:00:03
Public key for apr-util-1.5.2-6.el7.x86_64.rpm is not installed
(2/6): apr-util-1.5.2-6.el7.x86_64.rpm | 92 kB 00:00:04
(3/6): mailcap-2.1.41-2.el7.noarch.rpm | 31 kB 00:00:02
(4/6): apr-1.4.8-3.el7.x86_64.rpm | 103 kB 00:00:06
(5/6): httpd-2.4.6-31.el7.centos.1.x86_64.rpm | 2.7 MB 00:00:52
(6/6): centos-logos-70.0.6-2.el7.centos.noarch.rpm | 21 MB 00:01:11
-----------------------------------------------------------------------------------------------------------------------------
Total 349 kB/s | 24 MB 00:01:11
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Importing GPG key 0xF4A80EB5:
Userid : "CentOS-7 Key (CentOS 7 Official Signing Key) <[email protected]>"
Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5
Package : centos-release-7-1.1503.el7.centos.2.8.x86_64 (@CentOS)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : apr-1.4.8-3.el7.x86_64 1/6
Installing : apr-util-1.5.2-6.el7.x86_64 2/6
Installing : httpd-tools-2.4.6-31.el7.centos.1.x86_64 3/6
Installing : mailcap-2.1.41-2.el7.noarch 4/6
Installing : centos-logos-70.0.6-2.el7.centos.noarch 5/6
Installing : httpd-2.4.6-31.el7.centos.1.x86_64 6/6
Verifying : centos-logos-70.0.6-2.el7.centos.noarch 1/6
Verifying : apr-1.4.8-3.el7.x86_64 2/6
Verifying : mailcap-2.1.41-2.el7.noarch 3/6
Verifying : apr-util-1.5.2-6.el7.x86_64 4/6
Verifying : httpd-tools-2.4.6-31.el7.centos.1.x86_64 5/6
Verifying : httpd-2.4.6-31.el7.centos.1.x86_64 6/6
Installed:
httpd.x86_64 0:2.4.6-31.el7.centos.1
Dependency Installed:
apr.x86_64 0:1.4.8-3.el7 apr-util.x86_64 0:1.5.2-6.el7 centos-logos.noarch 0:70.0.6-2.el7.centos
httpd-tools.x86_64 0:2.4.6-31.el7.centos.1 mailcap.noarch 0:2.1.41-2.el7
Complete!
If there any possibility to do same on Travis CI. I didn't find in the manual http://docs.travis-ci.com/user/docker/ .
I can't edit docker settings https://travis-ci.org/weldpua2008/ansible-apache/jobs/79963906#L29:
$ echo 'DOCKER_OPTS="-s devicemapper"' >> /etc/default/docker; service docker restart
/home/travis/build.sh: line 41: /etc/default/docker: Permission denied
/etc/init.d/docker: 38: .: Can't open /etc/default/docker
解决方案
Because of Travis CI Docker bug there is way to use new version of Docker. Thank to Dominic Jodoin from Travis CI team..travis.yml:
sudo: required
env:
#matrix:
- OS_TYPE=centos OS_VERSION=6 ANSIBLE_VERSION=1.9.2
branches:
only:
- master
# - stable
services:
- docker
before_install:
- sudo apt-get update
- sudo apt-get upgrade lxc-docker
- echo 'DOCKER_OPTS="-H tcp://127.0.0.1:2375 -H unix:///var/run/docker.sock -s devicemapper"' | sudo tee /etc/default/docker > /dev/null
- sudo service docker restart
- sleep 5
- sudo docker pull weldpua2008/docker-ansible:${OS_TYPE}${OS_VERSION}_v${ANSIBLE_VERSION}
script:
# Run tests in Container
- sudo docker run --rm=true -v `pwd`:/ansible-apache:rw weldpua2008/docker-ansible:${OS_TYPE}${OS_VERSION}_v${ANSIBLE_VERSION} /bin/bash -c "/ansible-apache/tests/test-in-docker-image.sh ${OS_TYPE} ${OS_VERSION} ${ANSIBLE_VERSION}"
notifications:
email: false
这篇关于如何使用Travis-CI在CentOS 7上运行测试？的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！