如何解决USB 3.0控制器兼容性问题Kinect v2？

问题描述

大家好，

我刚拿到我的Kinect v2并将它连接到我的华硕UX303L。 
我运行了Kinect v2配置验证器  ，一切都很好，除了USB控制器测试得到了臭名昭着的结果"用未知带宽检测到支持的USB 3.0端口。 Kinect可能与您的硬件兼容，也可能不兼容。" 
此外，一些SKD样本有效，有些则没有。

我在这个论坛上看了很多帖子，并有一些后续问题要解决这个问题： / p>

 首先 - 检查是否支持USB3主机控制器芯片

-          
我查看了本论坛发布的列表，使用Intel USB 3.0 eXtreme控制器的芯片组似乎没问题

 其次 - 检查  没有其他设备与该连接共享带宽

-          
你是怎么做到的？

 第三 - 假设我的带宽正在共享我怎样才能关闭设备连接到USB3主控制器，这样我就可以激活一个USB3端口与Kinect一起使用。

 感谢大家的帮助！

解决方案

Hi Everyone,

I just got my Kinect v2 and hooked it up to my Asus UX303L.  I ran the Kinect v2 Configuration Verifier  and everything was good except the USB Controller Test get the infamous result "Supported USB 3.0 port detected with unknown bandwidth. Kinect may or may not be compatible with your hardware." Additionally some of the SKD samples work and others do not.

I have read many threads in this forum and have some follow up questions to resolve this:

 First - Check that the USB3 Host controller chip is supported

-         I checked against the list posted in this forum and chipsets with Intel USB 3.0 eXtreme controller seem to be OK

 Second – Check  that no other devices are sharing bandwidth with that connection

-         How do you do this?

 Third – Assuming my bandwidth is being shared how can I turn off the devices that are connected to the USB3 Host Controller so that I just have the one USB3 port active to use with the Kinect.

 Thanks everyone for your help!

解决方案

这篇关于如何解决USB 3.0控制器兼容性问题Kinect v2？的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！