问题描述
我正在尝试使用JavaServiceWrapper 3.5.16将Jetty设置为服务，并且已经尝试了 JSW网站，但我仍然面临着这个问题:
I am trying to setup jetty as a service using JavaServiceWrapper 3.5.16 and I have tried all the four integration methods specified at the JSW website, but still I am facing this problem:
我完全按照JSW的文档所述进行操作，并配置wrapper.conf文件，我启动了jetty.bat文件，这表明码头已经启动.但是，当我尝试从浏览器访问它时，我得到
I do exactly as the documentation for JSW says and configure the wrapper.conf file, I start the jetty.bat file and it shows that jetty has been started. But when I try to access it from the browser, I get
此外，据称当码头开始时，它不会在webapps文件夹中部署任何.war文件.
Also , when jetty supposedly starts it doesn't deploy any of the .war files in the webapps folder.
我为第四种集成方法(WrapperJarApp)如下配置了wrapper.conf:
I configured the wrapper.conf as follows for the 4th integration method(WrapperJarApp):
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperJarApp
wrapper.java.classpath.1=%WRAPPER_HOME%/lib/*.jar
wrapper.java.classpath.2=%JETTY_HOME%/lib/*.jar
wrapper.java.classpath.3=%JETTY_HOME%/start.jar
wrapper.java.library.path.1=%WRAPPER_HOME%/lib
我应该如何更改码头的配置才能正确启动并在webapp文件夹中部署文件.
What should I change in the configuration for jetty to start properly and deploy the files in the webapp folder.
请帮助！
wrapper log file content-
状态|包装| 2012/11/20 13:43:55 | ->包装器开始作为控制台
STATUS | wrapper | 2012/11/20 13:43:55 | --> Wrapper Started as Console
状态|包装| 2012/11/20 13:43:55 | Java Service Wrapper社区版32位3.5.16状态|包装| 2012/11/20 13:43:55 |版权所有(C)1999-2012 Tanuki Software，Ltd.保留所有权利.
状态|包装| 2012/11/20 13:43:55 | http://wrapper.tanukisoftware.com
状态|包装| 2012/11/20 13:43:55 |
状态|包装| 2012/11/20 13:43:55 |正在启动JVM ...
信息| jvm 1 | 2012/11/20 13:43:56 | WrapperManager:正在初始化...
信息| jvm 1 | 2012/11/20 13:43:56 | 2012-11-20 13:43:56.762:INFO:oejs.Server:jetty-8.1.3.v20120416
信息| jvm 1 | 2012/11/20 13:43:57 | 2012-11-20 13:43:56.965:INFO:oejus.SslContextFactory:Enabled协议[SSLv2Hello，SSLv3，TLSv1]的协议[SSLv2Hello，SSLv3，TLSv1]信息| jvm 1 | 2012/11/20 13:43:57 | 2012-11-20 13:43:56.965:INFO:oejs.AbstractConnector:已启动[email protected]:7443
信息| jvm 1 | 2012/11/20 13:43:57 | 2012-11-20 13:43:56.996:INFO:oejs.AbstractConnector:已启动[email protected]:8085
STATUS | wrapper | 2012/11/20 13:43:55 | Java Service Wrapper Community Edition 32-bit 3.5.16STATUS | wrapper | 2012/11/20 13:43:55 | Copyright (C) 1999-2012 Tanuki Software, Ltd. All Rights Reserved.
STATUS | wrapper | 2012/11/20 13:43:55 | http://wrapper.tanukisoftware.com
STATUS | wrapper | 2012/11/20 13:43:55 |
STATUS | wrapper | 2012/11/20 13:43:55 | Launching a JVM...
INFO | jvm 1 | 2012/11/20 13:43:56 | WrapperManager: Initializing...
INFO | jvm 1 | 2012/11/20 13:43:56 | 2012-11-20 13:43:56.762:INFO:oejs.Server:jetty-8.1.3.v20120416
INFO | jvm 1 | 2012/11/20 13:43:57 | 2012-11-20 13:43:56.965:INFO:oejus.SslContextFactory:Enabled Protocols [SSLv2Hello, SSLv3, TLSv1] of [SSLv2Hello, SSLv3, TLSv1]INFO | jvm 1 | 2012/11/20 13:43:57 | 2012-11-20 13:43:56.965:INFO:oejs.AbstractConnector:Started [email protected]:7443
INFO | jvm 1 | 2012/11/20 13:43:57 | 2012-11-20 13:43:56.996:INFO:oejs.AbstractConnector:Started [email protected]:8085
wrapper.conf-
#encoding=UTF-8
# Configuration files must begin with a line specifying the encoding
# of the the file.
#********************************************************************
# Wrapper License Properties (Ignored by Community Edition)
#********************************************************************
# Professional and Standard Editions of the Wrapper require a valid
# License Key to start. Licenses can be purchased or a trial license
# requested on the following pages:
# http://wrapper.tanukisoftware.com/purchase
# http://wrapper.tanukisoftware.com/trial
# Include file problems can be debugged by removing the first '#'
# from the following line:
##include.debug
# The Wrapper will look for either of the following optional files for a
# valid License Key. License Key properties can optionally be included
# directly in this configuration file.
#include ../conf/wrapper-license.conf
#include ../conf/wrapper-license-%WRAPPER_HOST_NAME%.conf
# The following property will output information about which License Key(s)
# are being found, and can aid in resolving any licensing problems.
#wrapper.license.debug=TRUE
#********************************************************************
# Wrapper Localization
#********************************************************************
# Specify the locale which the Wrapper should use. By default the system
# locale is used.
#wrapper.lang=en_US # en_US or ja_JP
# Specify the location of the Wrapper's language resources. If these are
# missing, the Wrapper will default to the en_US locale.
wrapper.lang.folder=../lang
#********************************************************************
# Wrapper Java Properties
#********************************************************************
# Java Application
# Locate the java binary on the system PATH:
wrapper.java.command=java
# Specify a specific java binary:
#set.JAVA_HOME=/java/path
#wrapper.java.command=%JAVA_HOME%/bin/java
# Tell the Wrapper to log the full generated Java command line.
#wrapper.java.command.loglevel=INFO
# Java Main class. This class must implement the WrapperListener interface
# or guarantee that the WrapperManager class is initialized. Helper
# classes are provided to do this for you. See the Integration section
# of the documentation for details.
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
# Java Classpath (include wrapper.jar) Add class path elements as
# needed starting from 1
wrapper.java.classpath.1=%JETTY_HOME%/lib/wrapper.jar
wrapper.java.classpath.2=%JETTY_HOME%/start.jar
# Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=%JETTY_HOME%/lib
# Java Bits. On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
wrapper.java.additional.auto_bits=TRUE
# Java Additional Parameters
wrapper.java.additional.1=wrapper.java.additional.1=-Djetty.home=%JETTY_HOME%
#wrapper.java.additional.2=-Djava.io.tmpdir=/tmp
# Java Additional Parameters from File
wrapper.java.additional_file=
# Initial Java Heap Size (in MB)
#wrapper.java.initmemory=3
# Maximum Java Heap Size (in MB)
#wrapper.java.maxmemory=64
# Application parameters. Add parameters as needed starting from 1
wrapper.app.parameter.1=org.eclipse.jetty.start.Main
#********************************************************************
# Wrapper Logging Properties
#********************************************************************
# Enables Debug output from the Wrapper.
# wrapper.debug=TRUE
# Format of output for the console. (See docs for formats)
wrapper.console.format=PM
# Log Level for console output. (See docs for log levels)
wrapper.console.loglevel=INFO
# Log file to use for wrapper output logging.
wrapper.logfile=../logs/wrapper.log
# Format of output for the log file. (See docs for formats)
wrapper.logfile.format=LPTM
# Log Level for log file output. (See docs for log levels)
wrapper.logfile.loglevel=INFO
# Maximum size that the log file will be allowed to grow to before
# the log is rolled. Size is specified in bytes. The default value
# of 0, disables log rolling. May abbreviate with the 'k' (kb) or
# 'm' (mb) suffix. For example: 10m = 10 megabytes.
wrapper.logfile.maxsize=0
# Maximum number of rolled log files which will be allowed before old
# files are deleted. The default value of 0 implies no limit.
wrapper.logfile.maxfiles=0
# Log Level for sys/event log output. (See docs for log levels)
wrapper.syslog.loglevel=NONE
#********************************************************************
# Wrapper General Properties
#********************************************************************
# Allow for the use of non-contiguous numbered properties
wrapper.ignore_sequence_gaps=TRUE
# Do not start if the pid file already exists.
wrapper.pidfile.strict=TRUE
# Title to use when running as a console
wrapper.console.title=Test Wrapper Sample Application
#********************************************************************
# Wrapper JVM Checks
#********************************************************************
# Detect DeadLocked Threads in the JVM. (Requires Standard Edition)
wrapper.check.deadlock=TRUE
wrapper.check.deadlock.interval=10
wrapper.check.deadlock.action=RESTART
wrapper.check.deadlock.output=FULL
# Out Of Memory detection.
# (Ignore output from dumping the configuration to the console. This is only needed by the TestWrapper sample application.)
wrapper.filter.trigger.999=wrapper.filter.trigger.*java.lang.OutOfMemoryError
wrapper.filter.allow_wildcards.999=TRUE
wrapper.filter.action.999=NONE
# Ignore -verbose:class output to avoid false positives.
wrapper.filter.trigger.1000=[Loaded java.lang.OutOfMemoryError
wrapper.filter.action.1000=NONE
# (Simple match)
wrapper.filter.trigger.1001=java.lang.OutOfMemoryError
# (Only match text in stack traces if -XX:+PrintClassHistogram is being used.)
#wrapper.filter.trigger.1001=Exception in thread "*" java.lang.OutOfMemoryError
#wrapper.filter.allow_wildcards.1001=TRUE
wrapper.filter.action.1001=RESTART
wrapper.filter.message.1001=The JVM has run out of memory.
#********************************************************************
# Wrapper Email Notifications. (Requires Professional Edition)
#********************************************************************
# Common Event Email settings.
#wrapper.event.default.email.debug=TRUE
#wrapper.event.default.email.smtp.host=<SMTP_Host>
#wrapper.event.default.email.smtp.port=25
#wrapper.event.default.email.subject=[%WRAPPER_HOSTNAME%:%WRAPPER_NAME%:%WRAPPER_EVENT_NAME%] Event Notification
#wrapper.event.default.email.sender=<Sender email>
#wrapper.event.default.email.recipient=<Recipient email>
# Configure the log attached to event emails.
#wrapper.event.default.email.attach_log=TRUE
#wrapper.event.default.email.maillog.lines=50
#wrapper.event.default.email.maillog.format=LPTM
#wrapper.event.default.email.maillog.loglevel=INFO
# Enable specific event emails.
#wrapper.event.wrapper_start.email=TRUE
#wrapper.event.jvm_prelaunch.email=TRUE
#wrapper.event.jvm_start.email=TRUE
#wrapper.event.jvm_started.email=TRUE
#wrapper.event.jvm_deadlock.email=TRUE
#wrapper.event.jvm_stop.email=TRUE
#wrapper.event.jvm_stopped.email=TRUE
#wrapper.event.jvm_restart.email=TRUE
#wrapper.event.jvm_failed_invocation.email=TRUE
#wrapper.event.jvm_max_failed_invocations.email=TRUE
#wrapper.event.jvm_kill.email=TRUE
#wrapper.event.jvm_killed.email=TRUE
#wrapper.event.jvm_unexpected_exit.email=TRUE
#wrapper.event.wrapper_stop.email=TRUE
# Specify custom mail content
wrapper.event.jvm_restart.email.body=The JVM was restarted.\n\nPlease check on its status.\n
#********************************************************************
# Wrapper Windows NT/2000/XP Service Properties
#********************************************************************
# WARNING - Do not modify any of these properties when an application
# using this configuration file has been installed as a service.
# Please uninstall the service before modifying this section. The
# service can then be reinstalled.
# Name of the service
wrapper.name=testwrapper
# Display name of the service
wrapper.displayname=Test Wrapper Sample Application
# Description of the service
wrapper.description=Test Wrapper Sample Application Description
# Service dependencies. Add dependencies as needed starting from 1
wrapper.ntservice.dependency.1=
# Mode in which the service is installed. AUTO_START, DELAY_START or DEMAND_START
wrapper.ntservice.starttype=AUTO_START
# Allow the service to interact with the desktop.
wrapper.ntservice.interactive=false
wrapper.ntservice.name=jetty
wrapper.ntservice.displayname=jetty deployment Server
wrapper.ntservice.description=jetty deployment Server
推荐答案
conf文件中wrapper.app.parameter.1的值是什么?
what is the value of wrapper.app.parameter.1 in your conf file?
我建议以下配置:
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
wrapper.java.classpath.1=%JETTY_HOME%/lib/wrapper.jar
wrapper.java.classpath.2=%JETTY_HOME%/start.jar
wrapper.java.library.path.1=%JETTY_HOME%/lib
wrapper.java.additional.1=-Djetty.home=%JETTY_HOME%
#not necessary on windows
#wrapper.java.additional.2=-Djava.io.tmpdir=/tmp
wrapper.app.parameter.1=org.eclipse.jetty.start.Main
希望这对您有所帮助.
在我的码头主目录中，包装程序二进制文件位于bin文件夹中，而libwrapper.so(wrapper.dll)和wrapper.jar位于lib目录中.所以我没有设置WRAPPER_HOME ...
in my jetty home dir, the wrapper binary is in the bin folder and libwrapper.so (wrapper.dll) and wrapper.jar in the lib directory. So I don't have WRAPPER_HOME set...
这篇关于在Windows上使用Java Service wrapper.Jetty 8即服务的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！