问题描述
我以前用过 PIC，现在我用的是 STM32F415.在我的代码的时间关键部分，我需要设置一个非常精确的延迟来调整 DAC-DMA 的周期，这些 DAC-DMA 一起工作以创建周期性模拟信号.
I've used PICs before and now I'm using with STM32F415.On a time-critical part of my code I need to put a very exact delay to adjust the period of the DAC-DMA that are working together to create a periodic analog signal.
我想添加的延迟从 0 到 63 个时钟周期(如果我能够做 10-63 个时钟周期，那也可以).在 PIC24F 汇编中，有一条指令REPEAT"，它允许我将下一条指令重复一定次数.这对我很有用，因为我可以这样做:
The delay I want to add goes from 0 to 63 clock cycles (If I were able to do 10-63 clock cycles it would be OK aswell). In PIC24F assembly, there's the instruction "REPEAT" which allows me to repeat the next instruction a certain number of times. That would work great for me as I'd be able to just do:
REPEAT #0xNUMBER
NOP
我试图找到与 STM32F4 类似的东西，但我在指令集、参考手册和互联网上搜索都没有运气.
I'm trying to find something similar with the STM32F4, but I had no luck searching in the instruction set, Reference Manual, and on the Internet in general.
我已经尝试在 C 中使用 for/while 循环和一个专用于它的计时器，但是所需的额外指令消耗了太多时间(40-50 个周期，具体取决于我的编程方式).
I've already tried to use for/while loops in C and a timer dedicated to it, but the extra instructiosn required consume too much time (40-50 cycles depending on the way I program it).
如果有人有想法或知道如何去做，这对我来说非常有用.
If someone has an idea or knows how to do it, It would be very useful for me.
非常感谢.
英语不是我的母语，因此对于任何可能的错误，我深表歉意.让我知道，我会努力改进它:)
编辑 1(17 年 7 月 23 日)
感谢大家的回答，我最近很忙，不能一一回复.我会尝试@berendi 门控时钟解决方案，它似乎最适合我的应用程序.学习了很多关于STM32我不知道的东西，谢谢大家！
Thanks to everyone answering, I've been very busy and couldn't answer every one of you individually.I'll try @berendi solution of gated clocks, it seems as the best fit for my application.I'm learning a lot of things about the STM32 I didn't know, thank you everyone!
推荐答案
所以，如果我理解正确的话，您有定时器 A 控制您的 DAC，在每次计数器溢出时触发转换，并且您希望将其延迟可变数量的时钟周期.
So, if I'm understanding it correctly, you have Timer A controlling your DAC, triggering a conversion at each counter overflow, and you'd like to delay it for a variable number of clock cycles.
STM32F4 的大多数(如果不是全部)定时器支持门控模式从机操作，您可以选择另一个定时器(定时器 B)作为主控，定时器 A 仅在触发时计数定时器 B 的输出为低电平.换句话说，定时器 A 将在定时器 B 的上升沿停止计数，并在下降沿恢复计数.现在，将定时器 B 配置为在启用时输出单个脉冲，其中脉冲宽度是您想要的延迟，然后定时器 A 将延迟脉冲的确切持续时间.
Most (if not all) timers of the STM32F4 support gated mode slave operation, where you can select another timer (Timer B) as a master, and Timer A counts only as long as the trigger output of Timer B is low. In other words, Timer A will stop counting on a rising edge from Timer B, and resume counting on a falling edge. Now, configure Timer B to output a single pulse when enabled, where the pulse width is the delay you want, then Timer A will be delayed for the exact duration of the pulse.
参见参考手册中关于单脉冲模式、定时器和外部触发同步的章节，以及对 CR1、CR2 和 SMCR 寄存器的描述.
See the chapters on One-pulse mode, Timers and external trigger synchronization, and the description of the CR1, CR2, and SMCR registers in the reference manual.
这篇关于在没有“循环"的情况下重复某条指令一定次数?的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！