bash和ksh之间的子shell差异 | bash和ksh之间的子shell差异

本文介绍了bash和ksh之间的子shell差异的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！

问题描述

我一直认为子shell不是子进程，而是另一个子进程外壳环境在同一过程中.

I always believed that a sub-shell was not a child process, but anothershell environment in the same process.

我使用一组基本的内置函数:

I use a basic set of built-ins:

(echo "Hello";read)

在另一个终端上:

ps -t pts/0
  PID TTY          TIME CMD
20104 pts/0    00:00:00 ksh

因此，kornShell(ksh)中没有子进程.

So, no child process in kornShell (ksh).

输入bash，在使用相同命令的情况下，其行为似乎有所不同:

Enter bash, it appears to behave differently, given the same command:

  PID TTY          TIME CMD
 3458 pts/0    00:00:00 bash
20067 pts/0    00:00:00 bash

因此，bash中的子进程.
通过阅读bash的手册页，很明显，为子shell创建了另一个过程，但是，它伪造了$$，很时髦.

So, a child process in bash.
From reading the man pages for bash, it is obvious that another process is created for a sub-shell,however it fakes $$, which is sneeky.

这是bash和ksh之间的区别吗?还是我看错了症状?

Is this difference between bash and ksh expected, or am I reading the symptoms incorrectly?

其他信息:在Linux的bash和ksh上运行strace -f表示，bash为示例命令两次调用clone(它不调用fork).因此，bash可能正在使用线程(我尝试了ltrace，但它的核心转储了！).KornShell不会调用fork，vfork或clone.

additional information:Running strace -f on bash and ksh on Linux shows that bash calls clone twice for the sample command (it does not call fork). So bash might be using threads (I tried ltrace but it core dumped!).KornShell calls neither fork, vfork, nor clone.

推荐答案

ksh93很难避免子外壳.部分原因是避免了stdio并大量使用 sfio 允许内建函数直接通信.另一个原因是，ksh在理论上可以具有这么多的内置函数.如果使用SHOPT_CMDLIB_DIR构建，则默认情况下将包含并启用所有cmdlib内置.我无法提供避免使用子外壳程序的位置的完整列表，但通常仅在使用内置函数且没有重定向的情况下使用.

ksh93 works unusually hard to avoid subshells. Part of the reason is the avoidance of stdio and extensive use of sfio which allows builtins to communicate directly. Another reason is ksh can in theory have so many builtins. If built with SHOPT_CMDLIB_DIR, all of the cmdlib builtins are included and enabled by default. I can't give a comprehensive list of places where subshells are avoided, but it's typically in situations where only builtins are used, and where there are no redirects.

#!/usr/bin/env ksh

# doCompat arr
# "arr" is an indexed array name to be assigned an index corresponding to the detected shell.
# 0 = Bash, 1 = Ksh93, 2 = mksh
function doCompat {
    ${1:+:} return 1
    if [[ ${BASH_VERSION+_} ]]; then
        shopt -s lastpipe extglob
        eval "${1}[0]="
    else
        case "${BASH_VERSINFO[*]-${!KSH_VERSION}}" in
            .sh.version)
                nameref v=$1
                v[1]=
                if builtin pids; then
                    function BASHPID.get { .sh.value=$(pids -f '%(pid)d'); }
                elif [[ -r /proc/self/stat ]]; then
                    function BASHPID.get { read -r .sh.value _ </proc/self/stat; }
                else
                    function BASHPID.get { .sh.value=$(exec sh -c 'echo $PPID'); }
                fi 2>/dev/null
                ;;
            KSH_VERSION)
                nameref "_${1}=$1"
                eval "_${1}[2]="
                ;&
            *)
                if [[ ! ${BASHPID+_} ]]; then
                    echo 'BASHPID requires Bash, ksh93, or mksh >= R41' >&2
                    return 1
                fi
        esac
    fi
}

function main {
    typeset -a myShell
    doCompat myShell || exit 1 # stripped-down compat function.
    typeset x

    print -v .sh.version
    x=$(print -nv BASHPID; print -nr " $$"); print -r "$x" # comsubs are free for builtins with no redirections
    _=$({ print -nv BASHPID; print -r " $$"; } >&2)        # but not with a redirect
    _=$({ printf '%s ' "$BASHPID" $$; } >&2); echo         # nor for expansions with a redirect
    _=$(printf '%s ' "$BASHPID" $$ >&2); echo # but if expansions aren't redirected, they occur in the same process.
    _=${ { print -nv BASHPID; print -r " $$"; } >&2; }     # However, ${ ;} is always subshell-free (obviously).
    ( printf '%s ' "$BASHPID" $$ ); echo                   # Basically the same rules apply to ( )
    read -r x _ <<<$(</proc/self/stat); print -r "$x $$"   # These are free in {{m,}k,z}sh. Only Bash forks for this.
    printf '%s ' "$BASHPID" $$ | cat # Sadly, pipes always fork. It isn't possible to precisely mimic "printf -v".
    echo
} 2>&1

main "$@"

退出:

Version AJM 93v- 2013-02-22
31732 31732
31735 31732
31736 31732
31732 31732
31732 31732
31732 31732
31732 31732
31738 31732

所有这些内部I/O处理的另一个巧妙结果是，一些缓冲问题就消失了.这是一个使用tee和head内置命令读取行的有趣示例(请勿在其他任何shell中尝试使用此命令).

Another neat consequence of all this internal I/O handling is some buffering issues just go away. Here's a funny example of reading lines with tee and head builtins (don't try this in any other shell).

 $ ksh -s <<\EOF
integer -a x
builtin head tee
printf %s\\n {1..10} |
    while head -n 1 | [[ ${ { x+=("$(tee /dev/fd/{3,4})"); } 3>&1; } ]] 4>&1; do
        print -r -- "${x[@]}"
    done
EOF
1
0 1
2
0 1 2
3
0 1 2 3
4
0 1 2 3 4
5
0 1 2 3 4 5
6
0 1 2 3 4 5 6
7
0 1 2 3 4 5 6 7
8
0 1 2 3 4 5 6 7 8
9
0 1 2 3 4 5 6 7 8 9
10
0 1 2 3 4 5 6 7 8 9 10

这篇关于bash和ksh之间的子shell差异的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！