本文介绍了UsbLibDotNet示例不起作用的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
嘿大家。
我正在尝试使用C＃库UsbLibDotNet与我的隐藏设备进行通信，这是推荐的。
但是我无法举例说明。它总是触发未找到设备。但是，我运行了第一个显示所有隐藏设备信息的示例，它也显示了我的设备。
我无法理解。示例代码如下...
Hey everyone.
I'm trying to communicate with my hid device using C# library UsbLibDotNet which is recommended here.
But I couldn't make the examples for. it always fire "Device not Found". However, I run the very first examples that show all hid devices information and it shows my device too.
I couldn't understand that. The example code is below...
using System;
using System.Text;
using LibUsbDotNet;
using LibUsbDotNet.Main;
namespace Examples
{
internal class ReadPolling
{
public static UsbDevice MyUsbDevice;
#region SET YOUR USB Vendor and Product ID!
public static UsbDeviceFinder MyUsbFinder = new UsbDeviceFinder(1234, 1234);
#endregion
public static void Main(string[] args)
{
ErrorCode ec = ErrorCode.None;
try
{
// Find and open the usb device.
MyUsbDevice = UsbDevice.OpenUsbDevice(MyUsbFinder);
// If the device is open and ready
if (MyUsbDevice == null) throw new Exception("Device Not Found.");
// If this is a "whole" usb device (libusb-win32, linux libusb-1.0)
// it exposes an IUsbDevice interface. If not (WinUSB) the
// 'wholeUsbDevice' variable will be null indicating this is
// an interface of a device; it does not require or support
// configuration and interface selection.
IUsbDevice wholeUsbDevice = MyUsbDevice as IUsbDevice;
if (!ReferenceEquals(wholeUsbDevice, null))
{
// This is a "whole" USB device. Before it can be used,
// the desired configuration and interface must be selected.
// Select config #1
wholeUsbDevice.SetConfiguration(1);
// Claim interface #0.
wholeUsbDevice.ClaimInterface(0);
}
// open read endpoint 1.
UsbEndpointReader reader = MyUsbDevice.OpenEndpointReader(ReadEndpointID.Ep01);
byte[] readBuffer = new byte[1024];
while (ec == ErrorCode.None)
{
int bytesRead;
// If the device hasn't sent data in the last 5 seconds,
// a timeout error (ec = IoTimedOut) will occur.
ec = reader.Read(readBuffer, 5000, out bytesRead);
if (bytesRead == 0) throw new Exception(string.Format("{0}:No more bytes!", ec));
Console.WriteLine("{0} bytes read", bytesRead);
// Write that output to the console.
Console.Write(Encoding.Default.GetString(readBuffer, 0, bytesRead));
}
Console.WriteLine("\r\nDone!\r\n");
}
catch (Exception ex)
{
Console.WriteLine();
Console.WriteLine((ec != ErrorCode.None ? ec + ":" : String.Empty) + ex.Message);
}
finally
{
if (MyUsbDevice != null)
{
if (MyUsbDevice.IsOpen)
{
// If this is a "whole" usb device (libusb-win32, linux libusb-1.0)
// it exposes an IUsbDevice interface. If not (WinUSB) the
// 'wholeUsbDevice' variable will be null indicating this is
// an interface of a device; it does not require or support
// configuration and interface selection.
IUsbDevice wholeUsbDevice = MyUsbDevice as IUsbDevice;
if (!ReferenceEquals(wholeUsbDevice, null))
{
// Release interface #0.
wholeUsbDevice.ReleaseInterface(0);
}
MyUsbDevice.Close();
}
MyUsbDevice = null;
// Free usb resources
UsbDevice.Exit();
}
// Wait for user input..
Console.ReadKey();
}
}
}
}
我的设备的描述符文件...
And my descriptor file for my device...
<pre>
const unsigned int USB_VENDOR_ID = 0x1234;
const unsigned int USB_PRODUCT_ID = 0x1234;
const char USB_SELF_POWER = 0x80; // Self powered 0xC0, 0x80 bus powered
const char USB_MAX_POWER = 50; // Bus power required in units of 2 mA
const char HID_INPUT_REPORT_BYTES = 64;
const char HID_OUTPUT_REPORT_BYTES = 64;
const char USB_TRANSFER_TYPE = 0x03; //0x03 Interrupt
const char EP_IN_INTERVAL = 1;
const char EP_OUT_INTERVAL = 1;
const char USB_INTERRUPT = 1;
const char USB_HID_EP = 1;
const char USB_HID_RPT_SIZE = 33;
/* Device Descriptor */
const struct {
char bLength; // bLength - Descriptor size in bytes (12h)
char bDescriptorType; // bDescriptorType - The constant DEVICE (01h)
unsigned int bcdUSB; // bcdUSB - USB specification release number (BCD)
char bDeviceClass; // bDeviceClass - Class Code
char bDeviceSubClass; // bDeviceSubClass - Subclass code
char bDeviceProtocol; // bDeviceProtocol - Protocol code
char bMaxPacketSize0; // bMaxPacketSize0 - Maximum packet size for endpoint 0
unsigned int idVendor; // idVendor - Vendor ID
unsigned int idProduct; // idProduct - Product ID
unsigned int bcdDevice; // bcdDevice - Device release number (BCD)
char iManufacturer; // iManufacturer - Index of string descriptor for the manufacturer
char iProduct; // iProduct - Index of string descriptor for the product.
char iSerialNumber; // iSerialNumber - Index of string descriptor for the serial number.
char bNumConfigurations; // bNumConfigurations - Number of possible configurations
} device_dsc = {
0x12, // bLength
0x01, // bDescriptorType
0x0200, // bcdUSB
0x00, // bDeviceClass
0x00, // bDeviceSubClass
0x00, // bDeviceProtocol
8, // bMaxPacketSize0
USB_VENDOR_ID, // idVendor
USB_PRODUCT_ID, // idProduct
0x0001, // bcdDevice
0x01, // iManufacturer
0x02, // iProduct
0x00, // iSerialNumber
0x01 // bNumConfigurations
};
/* Configuration 1 Descriptor */
const char configDescriptor1[]= {
// Configuration Descriptor
0x09, // bLength - Descriptor size in bytes
0x02, // bDescriptorType - The constant CONFIGURATION (02h)
0x29,0x00, // wTotalLength - The number of bytes in the configuration descriptor and all of its subordinate descriptors
1, // bNumInterfaces - Number of interfaces in the configuration
1, // bConfigurationValue - Identifier for Set Configuration and Get Configuration requests
0, // iConfiguration - Index of string descriptor for the configuration
USB_SELF_POWER, // bmAttributes - Self/bus power and remote wakeup settings
USB_MAX_POWER, // bMaxPower - Bus power required in units of 2 mA
// Interface Descriptor
0x09, // bLength - Descriptor size in bytes (09h)
0x04, // bDescriptorType - The constant Interface (04h)
0, // bInterfaceNumber - Number identifying this interface
0, // bAlternateSetting - A number that identifies a descriptor with alternate settings for this bInterfaceNumber.
2, // bNumEndpoint - Number of endpoints supported not counting endpoint zero
0x03, // bInterfaceClass - Class code
0,
}
任何有效的人有这个库之前可能有帮助吗？
我最好的问候...
}
Anyone that works with this library before could help maybe?
My Best Regards...
推荐答案
这篇关于UsbLibDotNet示例不起作用的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！