问题描述
如何在使用ggplot2创建的PDF图中使用Unicode字符作为标签，标题和类似的东西？
请考虑以下示例：
library（ggplot2）
qplot（Sepal.Length，Petal.Length，data = iris，main =Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ）
ggsave（t.pdf）
标题使用Unicode字符（小写字母），它在输出中显示为 ... 。这个问题只发生在pdf图上;如果我用 ggsave（t.png）替换最后一行，那么输出结果与预期的一样。
我在做什么错了？我使用的R脚本是UTF-8编码。一些系统信息：
R版本2.14.1（2011-12-22）
平台：x86_64-pc- linux-gnu（64位）
语言环境：
[1] LC_CTYPE = en_US.UTF-8 LC_NUMERIC = C
[3] LC_TIME = en_US.UTF-8 LC_COLLATE = en_US.UTF-8
[5] LC_MONETARY = en_US.UTF-8 LC_MESSAGES = en_US.UTF-8
[7] LC_PAPER = C LC_NAME = C
[9] LC_ADDRESS = C LC_TELEPHONE = C
[11] LC_MEASUREMENT = en_US.UTF-8 LC_IDENTIFICATION = C
附加基础包：
[1] stats graphics grDevices utils datasets methods base
当为这个问题寻找解决方案时，我发现了一些;虽然它与标题看起来没有直接关系，但在那里有很多关于让字体在R中做你想做的事情。
编辑
（$ g $ p$ b $ windowFonts（myCustomWindowsFontName = windowsFont（DejaVu Sans））
cairo_pdf（example.pdf，family =myCustomWindowsFontName）
qplot（Sepal.Length，Petal.Length，data = iris，main =Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ ）
dev.off（）
要使用基本图形命令 cairo_pdf（）如上所示，首先用 windowsFonts（）命令定义字体系列就足够了。当然，请确保您使用的字体实际上已经在您的系统上，并且实际上包含您需要的所有字形。
T有关DLL文件的说明下面的评论是我必须做的，以在<$ c $中获得 Cairo（）和 CairoPDF（）命令（开罗）在Windows上工作。然后：
库（ggplot2）
库（开罗）
windowsFonts（myCustomWindowsFontName = windowsFont（DejaVu Sans））
CairoPDF（example.pdf）
par（family =myCustomWindowsFontName）
qplot（Sepal.Length，Petal.Length，data = iris，main =Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ ）
dev.off（）
How can I use Unicode characters for labels, titles and similar things in a PDF plot created with ggplot2?
Consider the following example:
library(ggplot2)
qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ")
ggsave("t.pdf")
The title of the plot uses Unicode characters (small caps), which in the output appear as .... The problem occurs only with pdf plots; if I replace the last line with ggsave("t.png"), then the output is as expected.
What am I doing wrong? The R script I have is in UTF-8 encoding. Some system information:
R version 2.14.1 (2011-12-22)
Platform: x86_64-pc-linux-gnu (64-bit)
locale:
[1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
[3] LC_TIME=en_US.UTF-8 LC_COLLATE=en_US.UTF-8
[5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
[7] LC_PAPER=C LC_NAME=C
[9] LC_ADDRESS=C LC_TELEPHONE=C
[11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
attached base packages:
[1] stats graphics grDevices utils datasets methods base
When searching for a solution for this problem, I found some evidence that R uses a single-byte encoding for mutli-byte encodigns such as UTF-8 for PDF or postscript output. I also found suggestions to, for instance, be able to get the Euro sign working, but no general solution.
As Ben suggested, cairo_pdf() is your friend. It also allows you to embed non-postscript fonts (i.e. TTF/OTF) in the PDF via the family argument (crucial if you don't happen to have any postscript fonts that contain the glyphs you want to use). For example:
library(ggplot2)
cairo_pdf("example.pdf", family="DejaVu Sans")
qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ")
dev.off()
...gives a PDF that looks like this:
See also this question; though it doesn't look directly relevant from the title, there is a lot in there about getting fonts to do what you want in R.
EDIT per request in comments, here is the windows-specific code:
library(ggplot2)
windowsFonts(myCustomWindowsFontName=windowsFont("DejaVu Sans"))
cairo_pdf("example.pdf", family="myCustomWindowsFontName")
qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ")
dev.off()
To use the base graphics command cairo_pdf() it should suffice to just define your font family with the windowsFonts() command first, as shown above. Of course, make sure you use a font that you actually have on your system, and that actually has all the glyphs that you need.
TThe instructions about DLL files in the comments below are what I had to do to get the Cairo() and CairoPDF() commands in library(Cairo) to work on Windows. Then:
library(ggplot2)
library(Cairo)
windowsFonts(myCustomWindowsFontName=windowsFont("DejaVu Sans"))
CairoPDF("example.pdf")
par(family="myCustomWindowsFontName")
qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ")
dev.off()
这篇关于ggplot2 PDF输出中的Unicode字符的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！