调试后我收到错误

调试后我收到错误

关注
发信
关注(28)粉丝(399)

调试后我收到错误，我可以知道如何修复错误吗？

本文介绍了调试后我收到错误，我可以知道如何修复错误吗？的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！ 问题描述 29岁程序员，3月因学历无情被辞！ #includestdio.h #includestdafx.h #includestdlib.h #include string.h 双PulauPinangCalculation（双水消费）; 双倍JohorCalculation（双水消费） ; 双SelangorCalculation（双水消费）; 双LabuanCalculation（双水消费）; 双NegeriSembilanCalculation（双水消费）; double MelakaCalculation（double waterConsumption）; double KedahCalculation（double waterConsumption）; double KelantanCalculation（double waterConsumption）; double PerakCalculation（双水消费）; 双重登嘉楼计算（双水消费）; 双倍PahangCalculation（双水消费）; 双倍PerlisCalculation（双水消费） ; 双Sarawak1Calculation（双水消费）; 双Sarawak2Calculati on（double waterConsumption）; 双Sarawak3Calculation（双水消费）; 双SabahCalculation（双水消费）; int main（） { double waterConsumption = 0; int state = 1; while（state！= 0）{ printf（由姓名和ID编写：45678 \ n）; printf（分类：4SPG1 \ n）; printf（这个程序为你计算每月水费。\ n）; printf（马来西亚国家\ n）; printf（1。 Johor \\\）; printf（2.Kedah \ n）; printf（3.Kelantan \ n）; printf（4.Labuan \ n）; printf（5.Malaka \ n）; printf（6。 Negeri Sembilan \ n）; printf（7.Phanghang \ n）; printf（8.Perak \ n）; printf（9.Perlis\ n）; printf（10.Pulau Pinang \ n）; printf（ 11. Sabah \ n; printf（12.砂拉越1（古晋，诗巫，Sri Aman，美里，林邦，Sarikei，Kapit）\ n）; printf（13。沙捞越2（民都鲁）\ n）; printf（14.砂拉越3（沙捞越其他地区）\ n）; printf（15.雪兰莪/吉隆坡/ Putrajaya \ n）; printf（16. Terengganu \ n）; printf（\ n请选择你的州或输入0退出：）; while（！scanf_s（％d，& state））{ printf（必须是数字：）; getchar（）; } 开关（州）{ 案例1： printf（ 选择状态：Johor \ n）; 执行{ printf（请输入本月用水量（以m ^ 3为单位）：） ; while（！scanf_s（％lf，& waterConsumption））{ printf（必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< 0）{ printf（错！不能为负值！再次输入！\ n）; } else if （waterConsumption> = 0）{ double result = JohorCalculation（waterConsumption）; printf（你需要支付RM％。2f％n，结果） ; printf（这个月。）; printf（\ n ----------------- -------------------------------------------------- --- \ n）; } } while（waterConsumption< 0）; 休息; 案例2： printf（选择状态：Kedah \ n）; 执行{ printf（请键入在本月的用水量（以m ^ 3为单位）：）; while（！scanf_s（％lf，& waterConsumption））{ printf （必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< ; 0）{ printf（错！不能为负值！再次输入！ \\ n）; } 否则if（waterConsumption> = 0）{ double result = KedahCalculation（waterConsumption）; printf（你需要支付RM％.2f％n，结果）; printf（这个月。）; printf（\ n ------------------------------------------- --------------------------- \ n）; } } while（waterConsumption< 0）; 休息; 案例3： printf（选择状态：吉兰丹\ n）; 做{ printf（请输入本月用水量（以m ^ 3为单位）：）; while（！scanf_s（％ lf，& waterConsumption））{ printf（必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< 0）{ printf（错！不能为负值！再次输入！\ n）; } 否则if（waterConsumption> = 0）{ double result = KelantanCalculation（waterConsumption）; printf（你需要支付RM％.2f％n，结果）; printf（这个月。）; printf（ \ ------------------------------------------------ ---------------------- \ n）; } } while（waterConsumption< ; 0）; 休息; 案例4： printf（Se le状态：Labuan \\\）; 做{ printf（请输入本月用水量（以m ^ 3为单位）：）; while（！scanf_s（％lf，& waterConsumption））{ printf（必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< 0）{ printf（错！不能为负值！再次输入！\ n）; } else if （waterConsumption> = 0）{ double result = LabuanCalculation（waterConsumption）; printf（你需要支付RM％。2f％n，结果） ; printf（这个月。）; printf（\ n ----------------- -------------------------------------------------- --- \ n）; } } while（waterConsumption< 0）; 休息; 案例5： printf（选择状态：Melaka \ n）; 执行{ printf（请键入在本月的用水量（以m ^ 3为单位）：）; while（！scanf_s（％lf，& waterConsumption））{ printf （必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< ; 0）{ printf（错！不能为负值！再次输入！\ n）; } else if（waterConsumption> = 0）{ double result = MelakaCalculation（waterConsumption）; printf（你需要支付RM％.2f％n，结果）; printf（这个月。）; printf（\ n ----------------------------------------- ----------------------------- \\\）; } } while（waterConsumption< 0）; 休息; 案例6： printf（选择状态：Negeri Sembilan \ n）; do { printf（请输入本月用水量（以m ^ 3为单位）：）; while（！scanf_s（ ％lf，& waterConsumption））{ printf（必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< 0）{ printf（错！不能为负值！再次输入！\ n） ; } 否则if（waterConsumption> = 0）{ double result = NegeriSembilanCalculation（waterConsumption）; printf（你需要支付RM％.2f％n，结果）; printf（这个月。）; printf（ \\\ ----------------------------------------------- ----------------------- \ n）; } } while（waterConsumption < 0）; 休息; 案例7： printf（Seleted state：Pahang\\\）; do { printf（请输入本月用水量（以m ^ 3为单位）： ）; while（！scanf_s（％lf，& waterConsumption））{ printf（必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< 0）{ printf（错！不能为负值！再次输入！\ n）; } else if （waterConsumption> = 0）{ 双倍结果= PahangCalculation（waterConsumption）; printf（你需要支付RM％。2f％n，结果） ; printf（这个月。）; printf（\ n ----------------- -------------------------------------------------- --- \ n）; } } while（waterConsumption< 0）; 休息; 案例8： printf（选择状态：Perak \ n）; 执行{ printf（请键入在本月的用水量（以m ^ 3为单位）：）; while（！scanf_s（％lf，& waterConsumption））{ printf （必须是数字：）; getchar（）; } if（waterConsumption< 0）{ printf（错！不能为负值！再次输入！\ n）; } 否则if（waterConsumption> = 0）{ double result = PerakCalculation（waterConsumption）; printf（你需要支付RM％.2f％n，结果）; printf（这个月。）; printf（\ n-- -------------------------------------------------- ------------------ \ n）; } } while（waterConsumption< 0）; 休息; 案例9： printf（选择状态：Perlis \ n）; 做{ printf（请输入本月用水量（以m ^ 3为单位）：）; while（！scanf_s（％ lf，& waterConsumption））{ printf（必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< 0）{ printf（错！不能为负值！再次输入！\ n）; } else if（waterConsumption> = 0）{ double result = PerlisCalculation（waterConsumption）; printf（你需要支付RM％.2f％n，结果）; printf（这个月。）; printf（ \ ------------------------------------------------ ---------------------- \ n）; } } while（waterConsumption< ; 0）; 休息; 案例10： printf（Selet ed州：Pulau Pinang \\\）; do { printf（请输入本月用水量（以m ^ 3为单位）：） ; while（！scanf_s（％lf，& waterConsumption））{ printf（必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< 0）{ printf（错！不能为负值！再次输入！\ n）; } else if （waterConsumption> = 0）{ 双重结果= PulauPinangCalculation（waterConsumption）; printf（你需要支付RM％。2f％n，结果） ; printf（这个月。）; printf（\ n ----------------- -------------------------------------------------- --- \ n）; } } while（waterConsumption< 0）; 休息; 案例11： printf（选择状态：Sabah \ n）; 执行{ printf（请键入在本月的用水量（以m ^ 3为单位）：）; while（！scanf_s（％lf，& waterConsumption））{ printf （必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< ; 0）{ printf（错！不能为负值！键入再次！\ n）; } 否则if（waterConsumption> = 0）{ double result = SabahCalculation（waterConsumption） ; printf（你需要支付RM％。2f％n，结果）; printf（这个月。）; printf（\ n ---------------------------------------- ------------------------------ \ n）; } } while（waterConsumption< 0）; 休息; 案例12： printf（砂拉越1（古晋，诗巫，Sri Aman，美里，林邦，Sarikei） ，Kapit）\ n）; 做{ printf（请输入本月用水量（以m ^ 3为单位）：）; printf（必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< 0）{ printf（错！不能是负值！再次输入！\ n）; } 否则if（waterConsumption> = 0）{ double result = Sarawak1Calculation（waterConsumption）; printf（你需要支付RM％.2f％n，结果）; printf（这个月。 ）; printf（\ n ---------------------------------- ------------------------------------ \\\）; } } while（waterConsumption< 0）; break; 案例13： printf（砂拉越2（民都鲁）\ n）; do { printf （请输入本月用水量（以m ^ 3为单位）：）; while（！scanf_s（％lf，& waterConsumption））{ printf（必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< 0）{ printf（错！不能为负值！再次输入！\ n）; } else if （waterConsumption> = 0）{ double result = Sarawak2Calculation（waterConsumption）; printf（你需要支付RM％。2f％n，结果） ; printf（这个月。）; printf（\ n ----------------- -------------------------------------------------- --- \ n）; } } while（waterConsumption< 0）; 休息; 案例14： printf（沙捞越3（沙捞越的其他地区）\ n）; do { printf （请输入本月用水量（以m ^ 3为单位）：）; while（！scanf_s（％lf，& waterConsumption））{ printf（必须是数字：）; getchar（）！='\ n'; } if（waterConsumption< 0）{ printf（错！不能为负值e！再次输入！\ n）; } else if（waterConsumption> = 0）{ double result = Sarawak3Calculation（waterConsumption）; printf（你需要支付RM％.2f％n，结果）; printf（这个月。）; printf（\ n ------------------------------------ ---------------------------------- \ n）; } } while（waterConsumption< 0）; 休息; 案例15： printf（Seleted state：Selangor / Kuala Lumpur / Putrajaya \ n）; 做{ printf（请输入本月用水量（以m ^ 3为单位）：）; while（ ！scanf_s（％lf，& waterConsumption））{ printf（必须是数字：）; getchar（）！='\ n '; } if（waterConsumption< 0）{ printf（错！不能为负值！再次输入！ \\ n）; } 否则if（waterConsumption> = 0）{ double result = SelangorCalculation（waterConsumption）; printf（你需要支付RM％.2f％n，结果）; printf（这个月。）; printf（\ n ------------------------------------------- --------------------------- \ n）; } } while（waterConsumption< 0）; break; case 16： printf（Seleted state：Terengganu \ n）; do { printf（请输入耗水量这个月（以m ^ 3为单位）：）; while（！scanf_s（％lf，& waterConsumption））{ printf（必须是一个数字：）; getchar（）！='\ n'; } if（waterConsumption< 0）{ printf（错！不能为负值！再次输入！\ n）; } else if （waterConsumption> = 0）{ double result = TerengganuCalculation（waterConsumption）; printf（你需要支付RM％。2f％n，结果） ; printf（这个月。）; printf（\ n ----------------- -------------------------------------------------- --- \ n）; } } while（waterConsumption< 0）; 休息; 案例0： 休息; 默认： printf（\ nInvalid Input！ ！\ n）; } } printf（感谢您使用我的程序。\ n）; 返回0; } //槟城 双PulauPinangCalculation（双水消费）{ double total = 0; double balanceLitre = 0; double band1 = 0.22 * 20; doub le band2 = 0.46 * 15; double band3 = 0.68 * 20; double band4 = 1.17 * 140; double band5 = 0.48 * 5; if（waterConsumption> = 0&& waterConsumption< = 20）{ total = waterConsumption * 0.22; if（total< 2.5）{ total = 2.5; balanceLitre = waterConsumption - 20; balanceLitre * = 0.46; total = band1 + balanceLitre; if（waterConsumption> 35）{ balanceLitre = waterConsumption - 35; balanceLitre * = 0.48; total = band1 + band2 + balanceLitre; } } else if（waterConsumption> 40&& waterConsumption< = 60）{ balanceLitre = waterConsumption - 40 ; balanceLitre * = 0.68; total = band1 + band2 + band5 + balanceLitre; } else if（waterConsumption>&&waterTersumption< = 200）{ balanceLitre = waterConsumption - 60; balanceLit re * = 1.17; total = band1 + band2 + band5 + band3 + balanceLitre; } else if（waterConsumption> 200）{ balanceLitre = waterConsumption - 200; balanceLitre * = 1.30; total = band1 + band2 + band5 + band3 + band4 + balanceLitre; } 总回报; } //柔佛 double JohorCalculation（double waterConsumption）{ double total = 0; double balanceLitre = 0; double band1 = 0.80 * 20; double band2 = 2.00 * 15; if（waterConsumption> = 0&& waterConsumption< = 20）{ total = waterConsumption * 0.8; if（total< 7）{ total = 7; } } 否则if（waterConsumption> 20&& waterConsumption< = 35）{ balanceLitre = waterConsumption - 20; balanceLitre * = 2.00; total = band1 + balanceLitre; } else if（waterConsumption> 35）{ balanceLitre = waterConsump - 35; balanceLitre * = 3.00; 总计= band1 + band2 + balanceLitre; } 返回总额; } //雪兰莪/吉隆坡/普特拉贾亚 双重雪兰莪计算（双水消费）{ double total = 0; double balanceLitre = 0; double band1 = 0.57 * 20; double band2 = 1.03 * 15; if（waterConsumption> = 0&& waterConsumption< = 20）{ total = waterConsumption * 0.57; if（total< 6）{ total = 6; $ b $} b $ b b balanceLitre = waterConsumption - 20; balanceLitre * = 1.03; total = band1 + balanceLitre; } 否则if（waterConsumption> 35）{ balanceLitre = waterConsumption - 35; balanceLitre * = 2.00; total = band1 + band2 + balanceLitre; } 返回总额; } // Labuan double LabuanCalculation（double waterConsumption）{ double total = 0; double balanceLitre = 0; double band1 = 0.70 * 20; double band2 = 1.20 * 15; if（waterConsumption> ; = 0&& waterConsumption< = 20）{ total = waterCo nsumption * 0.70; if（total< 7）{ 总计= 7; } } 否则if（waterConsumption> 20& & waterConsumption< = 35）{ balanceLitre = waterConsumption - 20; balanceLitre * = 1.20; total = band1 + balanceLitre; } 否则if（waterConsumption> 35）{ balanceLitre = waterConsumption - 35; balanceLitre * = 1.70; 总计= band1 + band2 + balanceLitre; } 返回总数; } // Negeri Sembilan 双倍NegeriSembilanCalculation（双水消费）{ double总计= 0; double balanceLitre = 0; double band1 = 0.55 * 20; double band2 = 0.85 * 15; if（waterConsumption> = 0&& waterConsumption< = 20）{ total = waterConsumption * 0.55; 如果（总计 总计= 5; 如果（waterConsumption> 20&& waterConsumption< = 35）{ balanceLitre = waterConsumption - 20; balanceLitre * = 0.85; total = band1 + balanceLitre; } 否则if（waterConsumption> 35）{ balanceLitre = waterConsumption - 35; balanceLitre * = 1.40; 总计= band1 + band2 + balanceLitre; } 返回总额; } //马六甲 双MelakaCalculation（双水消费）{ double total = 0 ; double balanceLitre = 0; double band1 = 0.70 * 20; double band2 = 1.15 * 15; if（waterConsumption> = 0&& waterConsumption< = 20）{ total = waterConsumption * 0.70; 如果（总计 总计= 7; } } 否则if（waterConsumption > 20&& waterConsumption< = 35）{ balanceLitre = waterConsumption - 20; balanceLitre * = 1.15; total = band1 + balanceLitre; } else if（waterConsumption> 35）{ balanceLitre = waterConsumption - 35; balanceLitre * = 1.75; total = band1 + band2 + balanceLitre; } 返回总额; } // Kedah double KedahCalculation（double waterConsumption）{ double total = 0; double balanceLitre = 0; double band1 = 0.50 * 20; double band2 = 0.90 * 15; if（waterConsumption> = 0&& waterConsumption< = 20）{ total = waterConsumption * 0.50; if（total< 6）{ total = 6; } } 否则if（waterConsumption> 20&& waterConsumption< = 35）{ balanceLitre = waterConsumption - 20; balanceLitre * = 0.90; 总计= band1 + balanceLitre; } 否则（waterConsumption> 35）{ balanceLitre = waterConsumption - 35; balanceLitre * = 1.30; total = band1 + band2 + balanceLitre; } 返回总数; } //吉兰丹 双吉兰丹计算（双水消费）{ 总计双倍= 0; double balanceLitre = 0; double band1 = 0.45 * 20; double band2 = 0.97 * 15; if（waterConsumption> = 0&& waterConsumption< = 20）{ total = waterConsumption * 0.45; if（total< 4.5）{ total = 4.5; $ b $} b $ b b balanceLitre = waterConsumption - 20; balanceLitre * = 0.97; total = band1 + balanceLitre; } else if（waterConsumption> 35）{ balanceLitre = waterConsumption - 35; balanceLitre * = 1.42; total = band1 + band2 + balanceLitre; } 返回总额; } //霹雳 双PerakCalculation（双水消费）{ 总计= 0; double balanceLitre = 0; double band1 = 0.30 * 10; double band2 = 0.70 * 10; if（waterConsumption> ; = 0&& waterConsumption< = 10）{ total = water消耗* 0.30; if（total< 3）{ 总计= 3; } } 否则if（waterConsumption> 10& & waterConsumption< = 20）{ balanceLitre = waterConsumption - 10; balanceLitre * = 0.70; total = band1 + balanceLitre; } if if（waterConsumption> 20）{ balanceLitre = waterConsumption - 20; balanceLitre * = 1.00; total = band1 + band2 + balanceLitre; } 返回总数; } //登嘉楼 双倍登嘉楼计算（双水消费）{ 总计双倍= 0; double balanceLitre = 0; double band1 = 0.42 * 20; double band2 = 0.65 * 20; double band3 = 0.90 * 20; if（waterConsumption> = 0&& waterConsumption< = 20）{ total = waterConsumption * 0.42; if（total< 4）{ 总计= 4; } } 否则if（waterConsumption> 20&& waterConsumption< = 40）{ balanceLitre = waterConsumption - 20; balanceLitre * = 0.65; total = band1 + balanceLitre; } else if（waterConsumption> 40&& waterConsumption< = 60）{ balanceLitre = waterConsumption - 40; balanceLitre * = 0.90; total = band1 + band2 + balanceLitre; } 否则if（waterConsumption> 60）{ balanceLitre = waterConsumption - 60; balanceLitre * = 1.00; 总= band1 + band2 + band3 + balanceLitre; } 返回总额; } //彭亨 双倍PahangCalculation（双水消费）{ 总计= 0; double balanceLitre = 0; double band1 = 0.37 * 18; double band2 = 0.79 * 27; if（ waterConsumption> = 0&& waterConsumption& lt; = 18）{ total = waterConsumption * 0.37; if（total< 3）{ 总计= 3; } } 否则if（waterConsumption> 18& & waterConsumption< = 45）{ balanceLitre = waterConsumption - 18; balanceLitre * = 0.79; total = band1 + balanceLitre; } 否则if（waterConsumption> 45）{ balanceLitre = waterConsumption - 45; balanceLitre * = 0.99; total = band1 + band2 + balanceLitre; } 返回总数; } // Perlis 双倍PerlisCalculation（双水消费）{ 总计双倍= 0; double balanceLitre = 0; double band1 = 0.40 * 15; double band2 = 0.70 * 25; if（waterConsumption> = 0&& waterConsumption< = 15）{ total = waterConsumption * 0.40; if（总计< 4）{ 总计= 4; } } else if（waterConsumption> 15&& waterConsumption< = 40）{ balanceLitre = waterConsumption - 15; balanceLitre * = 0.70; total = band1 + balanceLitre; } 否则if（waterConsumption> 40）{ balanceLitre = waterConsumption - 40; balanceLitre * = 1.10; 总计= band1 + band2 + balanceLitre; } 返回总额; } //砂拉越1 双重砂拉越1计算（双水消费）{ 总计双倍= 0; double balanceLitre = 0; double band1 = 0.48 * 15; double band2 = 0.72 * 35; if（waterConsumption> = 0&& waterConsumption< = 15）{ total = waterConsumption * 0.48; 如果（总计 总计= 4.4; } } 否则如果（ waterConsumption> 15& waterConsumption< = 50）{ balanc eLitre = waterConsumption - 15; \t\tbalanceLitre *= 0.72; \t\ttotal = band1 + balanceLitre; \t} \telse if (waterConsumption > 50) { \t\tbalanceLitre = waterConsumption - 50; \t\tbalanceLitre *= 0.76; \t\ttotal = band1 + band2 + balanceLitre; \t} \treturn total; } //Sarawak 2 double Sarawak2Calculation(double waterConsumption) { \tdouble total = 0; \tdouble balanceLitre = 0; \tdouble band1 = 6.60; \tdouble band2 = 0.61 * 31; \tif (waterConsumption >= 0 && waterConsumption <= 14) { \t\ttotal = 6.6; \t} \telse if (waterConsumption >14 && waterConsumption <= 45) { \t\tbalanceLitre = waterConsumption - 14; \t\tbalanceLitre *= 0.61; \t\ttotal = band1 + balanceLitre; \t} \telse if (waterConsumption > 45) { \t\tbalanceLitre = waterConsumption - 45; \t\tbalanceLitre *= 0.66; \t\ttotal = band1 + band2 + balanceLi tre; \t} \treturn total; } //Sarawak 3 double Sarawak3Calculation(double waterConsumption) { \tdouble total = 0; \tdouble balanceLitre = 0; \tdouble band1 = 0.44 * 15; \tdouble band2 = 0.65 * 35; \tif (waterConsumption >= 0 && waterConsumption <= 15) { \t\ttotal = waterConsumption * 0.44; \t\tif (total < 4) { \t\t\ttotal = 4; \t\t} \t} \telse if (waterConsumption >15 && waterConsumption <= 50) { \t\tbalanceLitre = waterConsumption - 15; \t\tbalanceLitre *= 0.65; \t\ttotal = band1 + balanceLitre; \t} \telse if (waterConsumption > 50) { \t\tbalanceLitre = waterConsumption - 50; \t\tbalanceLitre *= 0.69; \t\ttotal = band1 + band2 + balanceLitre; \t} \treturn total; } //Sabah double SabahCalculation(double waterConsumption) { \tdouble total = 0; \tdouble balanceLitre = 0; \tdouble band1 = 0.30 * 10; \tdouble band2 = 0.60 * 10; \tdouble band3 = 1.10 * 15; \tdouble band4 = 1.30 * 25; \tif (waterConsumption &g t;= 0 && waterConsumption <= 10) { \t\ttotal = waterConsumption * 0.30; \t\tif (total < 3) { \t\t\ttotal = 3; \t\t} \t} \telse if (waterConsumption >10 && waterConsumption <= 20) { \t\tbalanceLitre = waterConsumption - 10; \t\tbalanceLitre *= 0.60; \t\ttotal = band1 + balanceLitre; \t} \telse if (waterConsumption > 20 && waterConsumption <= 35) { \t\tbalanceLitre = waterConsumption - 20; \t\tbalanceLitre *= 1.10; \t\ttotal = band1 + band2 + balanceLitre; \t} \telse if (waterConsumption > 35 && waterConsumption <= 60) { \t\tbalanceLitre = waterConsumption - 35; \t\tbalanceLitre *= 1.30; \t\ttotal = band1 + band2 + band3 + balanceLitre; \t} \telse if (waterConsumption > 60) { \t\tbalanceLitre = waterConsumptio n - 60; \t\tbalanceLitre *= 1.80; \t\ttotal = band1 + band2 + band3 + band4 + balanceLitre; \t} \treturn total; } What I have tried: Step1 Error Msg C4700 uninitialized local variable ’state’ used C4473 ’printf’: not enough arguments passed format string I’m using VB 2015 C Language Step2 update, after I change from int state; to int state = 1; that big boss advice it’s able to debug but then after I key in the number and I’m getting another error which is \"Debug Assertion Failed\" Expression: (\"’n’ format specifier disabled\", 0)#include "stdio.h"#include "stdafx.h"#include "stdlib.h"#include "string.h"double PulauPinangCalculation(double waterConsumption);double JohorCalculation(double waterConsumption);double SelangorCalculation(double waterConsumption);double LabuanCalculation(double waterConsumption);double NegeriSembilanCalculation(double waterConsumption);double MelakaCalculation(double waterConsumption);double KedahCalculation(double waterConsumption);double KelantanCalculation(double waterConsumption);double PerakCalculation(double waterConsumption);double TerengganuCalculation(double waterConsumption);double PahangCalculation(double waterConsumption);double PerlisCalculation(double waterConsumption);double Sarawak1Calculation(double waterConsumption);double Sarawak2Calculation(double waterConsumption);double Sarawak3Calculation(double waterConsumption);double SabahCalculation(double waterConsumption);int main(){double waterConsumption = 0;int state = 1;while (state != 0) {printf("Prepared by Name and ID: 45678\n");printf("Class: 4SPG1\n");printf("This program calculates the monthly water bill for you.\n");printf("States in Malaysia\n");printf("1. Johor\n");printf("2. Kedah\n");printf("3. Kelantan\n");printf("4. Labuan\n");printf("5. Melaka\n");printf("6. Negeri Sembilan\n");printf("7. Pahang\n");printf("8. Perak\n");printf("9. Perlis\n");printf("10. Pulau Pinang\n");printf("11. Sabah\n");printf("12. Sarawak 1(Kuching, Sibu, Sri Aman, Miri, Limbang, Sarikei, Kapit)\n");printf("13. Sarawak 2(Bintulu)\n");printf("14. Sarawak 3(Other Parts of Sarawak)\n");printf("15. Selangor / Kuala Lumpur / Putrajaya\n");printf("16. Terengganu\n");printf("\nPlease select your state or enter 0 to exit: ");while (!scanf_s("%d", &state)) {printf("Must be a number: ");getchar();}switch (state) {case 1:printf("Seleted state: Johor\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = JohorCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 2:printf("Seleted state: Kedah\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = KedahCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 3:printf("Seleted state: Kelantan\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = KelantanCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 4:printf("Seleted state: Labuan\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = LabuanCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 5:printf("Seleted state: Melaka\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = MelakaCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 6:printf("Seleted state: Negeri Sembilan\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = NegeriSembilanCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 7:printf("Seleted state: Pahang\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = PahangCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 8:printf("Seleted state: Perak\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar();}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = PerakCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 9:printf("Seleted state: Perlis\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = PerlisCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 10:printf("Seleted state: Pulau Pinang\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = PulauPinangCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 11:printf("Seleted state: Sabah\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = SabahCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 12:printf("Sarawak 1(Kuching, Sibu, Sri Aman, Miri, Limbang, Sarikei, Kapit)\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = Sarawak1Calculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 13:printf("Sarawak 2(Bintulu)\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = Sarawak2Calculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 14:printf("Sarawak 3(Other Parts of Sarawak)\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = Sarawak3Calculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 15:printf("Seleted state: Selangor / Kuala Lumpur / Putrajaya\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = SelangorCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 16:printf("Seleted state: Terengganu\n");do {printf("Please key in the water consumption for this month (in m^3): ");while (!scanf_s("%lf", &waterConsumption)) {printf("Must be a number: ");getchar() != '\n';}if (waterConsumption < 0) {printf("Wrong! Cannot be negative value! Key in again!\n");}else if (waterConsumption >= 0) {double result = TerengganuCalculation(waterConsumption);printf("You need to pay for RM %.2f%n", result);printf(" for this month.");printf("\n----------------------------------------------------------------------\n");}} while (waterConsumption < 0);break;case 0:break;default:printf("\nInvalid Input!!\n");}}printf("Thanks for using my program.\n");return 0;}// Penangdouble PulauPinangCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.22 * 20;double band2 = 0.46 * 15;double band3 = 0.68 * 20;double band4 = 1.17 * 140;double band5 = 0.48 * 5;if (waterConsumption >= 0 && waterConsumption <= 20) {total = waterConsumption * 0.22;if (total < 2.5) {total = 2.5;}}else if (waterConsumption >20 && waterConsumption <= 40) {balanceLitre = waterConsumption - 20;balanceLitre *= 0.46;total = band1 + balanceLitre;if (waterConsumption > 35) {balanceLitre = waterConsumption - 35;balanceLitre *= 0.48;total = band1 + band2 + balanceLitre;}}else if (waterConsumption > 40 && waterConsumption <= 60) {balanceLitre = waterConsumption - 40;balanceLitre *= 0.68;total = band1 + band2 + band5 + balanceLitre;}else if (waterConsumption > 60 && waterConsumption <= 200) {balanceLitre = waterConsumption - 60;balanceLitre *= 1.17;total = band1 + band2 + band5 + band3 + balanceLitre;}else if (waterConsumption > 200) {balanceLitre = waterConsumption - 200;balanceLitre *= 1.30;total = band1 + band2 + band5 + band3 + band4 + balanceLitre;}return total;}//Johordouble JohorCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.80 * 20;double band2 = 2.00 * 15;if (waterConsumption >= 0 && waterConsumption <= 20) {total = waterConsumption * 0.8;if (total < 7) {total = 7;}}else if (waterConsumption >20 && waterConsumption <= 35) {balanceLitre = waterConsumption - 20;balanceLitre *= 2.00;total = band1 + balanceLitre;}else if (waterConsumption > 35) {balanceLitre = waterConsumption - 35;balanceLitre *= 3.00;total = band1 + band2 + balanceLitre;}return total;}//Selangor/KL/Putrajayadouble SelangorCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.57 * 20;double band2 = 1.03 * 15;if (waterConsumption >= 0 && waterConsumption <= 20) {total = waterConsumption * 0.57;if (total < 6) {total = 6;}}else if (waterConsumption >20 && waterConsumption <= 35) {balanceLitre = waterConsumption - 20;balanceLitre *= 1.03;total = band1 + balanceLitre;}else if (waterConsumption > 35) {balanceLitre = waterConsumption - 35;balanceLitre *= 2.00;total = band1 + band2 + balanceLitre;}return total;}//Labuandouble LabuanCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.70 * 20;double band2 = 1.20 * 15;if (waterConsumption >= 0 && waterConsumption <= 20) {total = waterConsumption * 0.70;if (total < 7) {total = 7;}}else if (waterConsumption >20 && waterConsumption <= 35) {balanceLitre = waterConsumption - 20;balanceLitre *= 1.20;total = band1 + balanceLitre;}else if (waterConsumption > 35) {balanceLitre = waterConsumption - 35;balanceLitre *= 1.70;total = band1 + band2 + balanceLitre;}return total;}//Negeri Sembilandouble NegeriSembilanCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.55 * 20;double band2 = 0.85 * 15;if (waterConsumption >= 0 && waterConsumption <= 20) {total = waterConsumption * 0.55;if (total < 5) {total = 5;}}else if (waterConsumption >20 && waterConsumption <= 35) {balanceLitre = waterConsumption - 20;balanceLitre *= 0.85;total = band1 + balanceLitre;}else if (waterConsumption > 35) {balanceLitre = waterConsumption - 35;balanceLitre *= 1.40;total = band1 + band2 + balanceLitre;}return total;}//Melakadouble MelakaCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.70 * 20;double band2 = 1.15 * 15;if (waterConsumption >= 0 && waterConsumption <= 20) {total = waterConsumption * 0.70;if (total < 7) {total = 7;}}else if (waterConsumption >20 && waterConsumption <= 35) {balanceLitre = waterConsumption - 20;balanceLitre *= 1.15;total = band1 + balanceLitre;}else if (waterConsumption > 35) {balanceLitre = waterConsumption - 35;balanceLitre *= 1.75;total = band1 + band2 + balanceLitre;}return total;}//Kedahdouble KedahCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.50 * 20;double band2 = 0.90 * 15;if (waterConsumption >= 0 && waterConsumption <= 20) {total = waterConsumption * 0.50;if (total < 6) {total = 6;}}else if (waterConsumption >20 && waterConsumption <= 35) {balanceLitre = waterConsumption - 20;balanceLitre *= 0.90;total = band1 + balanceLitre;}else if (waterConsumption > 35) {balanceLitre = waterConsumption - 35;balanceLitre *= 1.30;total = band1 + band2 + balanceLitre;}return total;}//Kelantandouble KelantanCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.45 * 20;double band2 = 0.97 * 15;if (waterConsumption >= 0 && waterConsumption <= 20) {total = waterConsumption * 0.45;if (total < 4.5) {total = 4.5;}}else if (waterConsumption >20 && waterConsumption <= 35) {balanceLitre = waterConsumption - 20;balanceLitre *= 0.97;total = band1 + balanceLitre;}else if (waterConsumption > 35) {balanceLitre = waterConsumption - 35;balanceLitre *= 1.42;total = band1 + band2 + balanceLitre;}return total;}//Perakdouble PerakCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.30 * 10;double band2 = 0.70 * 10;if (waterConsumption >= 0 && waterConsumption <= 10) {total = waterConsumption * 0.30;if (total < 3) {total = 3;}}else if (waterConsumption > 10 && waterConsumption <= 20) {balanceLitre = waterConsumption - 10;balanceLitre *= 0.70;total = band1 + balanceLitre;}else if (waterConsumption > 20) {balanceLitre = waterConsumption - 20;balanceLitre *= 1.00;total = band1 + band2 + balanceLitre;}return total;}// Terengganudouble TerengganuCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.42 * 20;double band2 = 0.65 * 20;double band3 = 0.90 * 20;if (waterConsumption >= 0 && waterConsumption <= 20) {total = waterConsumption * 0.42;if (total < 4) {total = 4;}}else if (waterConsumption >20 && waterConsumption <= 40) {balanceLitre = waterConsumption - 20;balanceLitre *= 0.65;total = band1 + balanceLitre;}else if (waterConsumption > 40 && waterConsumption <= 60) {balanceLitre = waterConsumption - 40;balanceLitre *= 0.90;total = band1 + band2 + balanceLitre;}else if (waterConsumption > 60) {balanceLitre = waterConsumption - 60;balanceLitre *= 1.00;total = band1 + band2 + band3 + balanceLitre;}return total;}//Pahangdouble PahangCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.37 * 18;double band2 = 0.79 * 27;if (waterConsumption >= 0 && waterConsumption <= 18) {total = waterConsumption * 0.37;if (total < 3) {total = 3;}}else if (waterConsumption >18 && waterConsumption <= 45) {balanceLitre = waterConsumption - 18;balanceLitre *= 0.79;total = band1 + balanceLitre;}else if (waterConsumption > 45) {balanceLitre = waterConsumption - 45;balanceLitre *= 0.99;total = band1 + band2 + balanceLitre;}return total;}//Perlisdouble PerlisCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.40 * 15;double band2 = 0.70 * 25;if (waterConsumption >= 0 && waterConsumption <= 15) {total = waterConsumption * 0.40;if (total < 4) {total = 4;}}else if (waterConsumption >15 && waterConsumption <= 40) {balanceLitre = waterConsumption - 15;balanceLitre *= 0.70;total = band1 + balanceLitre;}else if (waterConsumption > 40) {balanceLitre = waterConsumption - 40;balanceLitre *= 1.10;total = band1 + band2 + balanceLitre;}return total;}//Sarawak 1double Sarawak1Calculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.48 * 15;double band2 = 0.72 * 35;if (waterConsumption >= 0 && waterConsumption <= 15) {total = waterConsumption * 0.48;if (total < 4.4) {total = 4.4;}}else if (waterConsumption >15 && waterConsumption <= 50) {balanceLitre = waterConsumption - 15;balanceLitre *= 0.72;total = band1 + balanceLitre;}else if (waterConsumption > 50) {balanceLitre = waterConsumption - 50;balanceLitre *= 0.76;total = band1 + band2 + balanceLitre;}return total;}//Sarawak 2double Sarawak2Calculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 6.60;double band2 = 0.61 * 31;if (waterConsumption >= 0 && waterConsumption <= 14) {total = 6.6;}else if (waterConsumption >14 && waterConsumption <= 45) {balanceLitre = waterConsumption - 14;balanceLitre *= 0.61;total = band1 + balanceLitre;}else if (waterConsumption > 45) {balanceLitre = waterConsumption - 45;balanceLitre *= 0.66;total = band1 + band2 + balanceLitre;}return total;}//Sarawak 3double Sarawak3Calculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.44 * 15;double band2 = 0.65 * 35;if (waterConsumption >= 0 && waterConsumption <= 15) {total = waterConsumption * 0.44;if (total < 4) {total = 4;}}else if (waterConsumption >15 && waterConsumption <= 50) {balanceLitre = waterConsumption - 15;balanceLitre *= 0.65;total = band1 + balanceLitre;}else if (waterConsumption > 50) {balanceLitre = waterConsumption - 50;balanceLitre *= 0.69;total = band1 + band2 + balanceLitre;}return total;}//Sabahdouble SabahCalculation(double waterConsumption) {double total = 0;double balanceLitre = 0;double band1 = 0.30 * 10;double band2 = 0.60 * 10;double band3 = 1.10 * 15;double band4 = 1.30 * 25;if (waterConsumption >= 0 && waterConsumption <= 10) {total = waterConsumption * 0.30;if (total < 3) {total = 3;}}else if (waterConsumption >10 && waterConsumption <= 20) {balanceLitre = waterConsumption - 10;balanceLitre *= 0.60;total = band1 + balanceLitre;}else if (waterConsumption > 20 && waterConsumption <= 35) {balanceLitre = waterConsumption - 20;balanceLitre *= 1.10;total = band1 + band2 + balanceLitre;}else if (waterConsumption > 35 && waterConsumption <= 60) {balanceLitre = waterConsumption - 35;balanceLitre *= 1.30;total = band1 + band2 + band3 + balanceLitre;}else if (waterConsumption > 60) {balanceLitre = waterConsumption - 60;balanceLitre *= 1.80;total = band1 + band2 + band3 + band4 + balanceLitre;}return total;}What I have tried:Step1Error MsgC4700 uninitialized local variable 'state' usedC4473 'printf': not enough arguments passed format stringI'm using VB 2015 C LanguageStep2update, after I change from int state; to int state = 1; that big boss adviceit's able to debug but then after I key in the number and I'm getting another error which is"Debug Assertion Failed"Expression: ("'n' format specifier disabled", 0)推荐答案nt main(){double waterConsumption = 0;int state;while (state != 0) { // you cannot use this expression because you have not set any value in 'state'.printf("Prepared by Name and ID: 45678\n");No one will fizzle out your messy code. But the first error message means that state need some value before running. It is correct because C doesnt initialize memory. Solution 1:No one will fizzle out your messy code. But the first error message means that state need some value before running. It is correct because C doesnt initialize memory.Solution 1:int state = -1; Solution 2: read your code carefuly to find what is missing in this place. I guess that there isnt a string. Think about using some struct in your code and more constants and functions. LikeSolution 2: read your code carefuly to find what is missing in this place. I guess that there isnt a string.Think about using some struct in your code and more constants and functions. Likestruct City{ char name[30]; float price; int waterConsumption;};void CalculatePrice( struct City *city ); Serious tip: Read Learn C++!!!Richard MacCutchan already explained the first error. The printf problem is caused by specifying two parameters in your string, and then providing only one:Richard MacCutchan already explained the first error.The printf problem is caused by specifying two parameters in your string, and then providing only one:printf("You need to pay for RM %.2f%n", result); 这篇关于调试后我收到错误，我可以知道如何修复错误吗？的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！ 上岸，阿里云！
08-12 13:31
Powered by LMLPHP ©2024 调试后我收到错误 0.035533