本文介绍了MStest加载时间太长的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我有一个使用MSTest的项目设置，但是它们甚至在加载我的项目特定的DLL之前都花了太长时间来加载所有测试DLL.
I have a project setup to use MSTests but they are simply taking too long to load all the the test DLLs, before even loading my project specific DLLs.
我在使用Resharper 10.0.1的Visual Studio Professional 2015中
I´m on Visual Studio Professional 2015 with Resharper 10.0.1
由于堆栈溢出有关限制的投诉，我在这里仅附加部分日志，但是遵循这些dll的同一行，它的大小会增加10倍.在我的dll开始加载之前，总时间约为30秒，但此后只有几秒钟可以接受.
I´m attaching only part of the the logs down here since stack overflow complaint about limit, but it would be 10 times as bigger, following the same line of these dlls. The total time was around 30s, before my dlls started being loaded, but only a couple of acceptable seconds afterwards.
反正有优化的地方吗?
实际上，发现某些库在不同的域"下被多次加载/卸载(到目前为止，我仍然不知道其含义)
Actually, found that some libs are being loaded/unloaded multiple times under different "domains"( which I have no clue of the meaning up to this point)
(CLR v4.0.30319: Domain 16): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\mscorlib\v4.0_4.0.0.0__b77a5c561934e089\mscorlib.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
(CLR v4.0.30319: Domain 16): Unloaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\mscorlib\v4.0_4.0.0.0__b77a5c561934e089\mscorlib.dll'
(CLR v4.0.30319: Domain 17): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\mscorlib\v4.0_4.0.0.0__b77a5c561934e089\mscorlib.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
Edit2:
我上面描述的模式发生了很多次.在我发现 138 个匹配项的日志中搜索 mscorlib.dll ！
The pattern I described above is happening a lot of times. Searching for mscorlib.dll on the logs I found 138 matches!!
我的直觉是这是原因，但是我仍然不知道解决办法
My hunch is that this is the cause, but I still have no clue of the solution
谢谢
'vstest.executionengine.x86.exe' (CLR v4.0.30319: DefaultDomain): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\mscorlib\v4.0_4.0.0.0__b77a5c561934e089\mscorlib.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: DefaultDomain): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\vstest.executionengine.x86.exe'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Microsoft.VisualStudio.TestPlatform.TestExecutor.Core.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Microsoft.VisualStudio.TestPlatform.ObjectModel.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Microsoft.VisualStudio.TestPlatform.Common.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Microsoft.VisualStudio.TestPlatform.Core.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Diagnostics.ServiceModelSink\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Diagnostics.ServiceModelSink.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\assembly\GAC_MSIL\Microsoft.VisualStudio.Diagnostics.Measurement\14.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Diagnostics.Measurement.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Microsoft.VisualStudio.TestPlatform.Utilities.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestPlatform.Extensions.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestPlatform.Extensions.GenericTestAdapter.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestPlatform.Extensions.MSAppContainerAdapter.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestPlatform.UnitTestFramework.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestPlatform.Extensions.MSPhoneAdapter.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestPlatform.Extensions.OrderedTestAdapter.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestPlatform.Extensions.TfsLogger.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestPlatform.Extensions.TimelineLogger.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestPlatform.Extensions.TmiAdapter.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\assembly\GAC_MSIL\Microsoft.VisualStudio.QualityTools.Common\14.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.QualityTools.Common.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestPlatform.Extensions.TrxLogger.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestPlatform.Extensions.VSTestIntegration.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\assembly\GAC_MSIL\Microsoft.VisualStudio.QualityTools.UnitTestFramework\10.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.QualityTools.UnitTestFramework.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestTools.CppUnitTestFramework.ComInterfaces.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestTools.CppUnitTestFramework.CppPhoneUnitTestExtension.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.Composition\v4.0_4.0.0.0__b77a5c561934e089\System.ComponentModel.Composition.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Extensions\Microsoft.VisualStudio.TestTools.CppUnitTestFramework.CppUnitTestExtension.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\EXTENSIONS\MICROSOFT\WEB TOOLS\DNX\Microsoft.VisualStudio.Web.UnitTest.TestAdapter.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\EXTENSIONS\JFPTI2GP.J4J\PowerShellTools.TestAdapter.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\COMMONEXTENSIONS\MICROSOFT\TESTWINDOW\Microsoft.VisualStudio.TestWindow.Interfaces.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\assembly\GAC\Microsoft.VisualStudio.Shell.Interop\7.1.40304.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Shell.Interop.dll'. Module was built without symbols.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\EXTENSIONS\MICROSOFT\PYTHON TOOLS FOR VISUAL STUDIO\2.2\Microsoft.PythonTools.TestAdapter.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\assembly\GAC\Microsoft.VisualStudio.Shell.Interop.8.0\8.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Shell.Interop.8.0.dll'. Module was built without symbols.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PythonTools.Analysis\v4.0_2.0.2.2015__b03f5f7f11d50a3a\Microsoft.PythonTools.Analysis.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\PROGRAM FILES (X86)\MICROSOFT VISUAL STUDIO 14.0\COMMON7\IDE\EXTENSIONS\MICROSOFT\PYTHON TOOLS FOR VISUAL STUDIO\2.2\Microsoft.PythonTools.VSInterpreters.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\assembly\GAC\EnvDTE\8.0.0.0__b03f5f7f11d50a3a\EnvDTE.dll'. Module was built without symbols.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\assembly\GAC\Microsoft.VisualStudio.OLE.Interop\7.1.40304.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.OLE.Interop.dll'. Module was built without symbols.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Shell.14.0\v4.0_14.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Shell.14.0.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Shell.Immutable.10.0\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Shell.Immutable.10.0.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\Microsoft.VisualStudio.Settings.14.0\v4.0_14.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Settings.14.0.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Program Files (x86)\Microsoft Visual Studio 14.0\Common7\IDE\Extensions\Microsoft\Python Tools for Visual Studio\2.2\Microsoft.PythonTools.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Program Files (x86)\Microsoft Visual Studio 14.0\Common7\IDE\Extensions\Microsoft\Python Tools for Visual Studio - IronPython\2.2\Microsoft.PythonTools.IronPython.Interpreter.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Program Files (x86)\Microsoft Visual Studio 14.0\Common7\IDE\Extensions\Microsoft\Python Tools for Visual Studio - Uwp\2.2\Microsoft.PythonTools.Uwp.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\WindowsBase\v4.0_4.0.0.0__31bf3856ad364e35\WindowsBase.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework\v4.0_4.0.0.0__31bf3856ad364e35\PresentationFramework.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\PresentationCore\v4.0_4.0.0.0__31bf3856ad364e35\PresentationCore.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll'. Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'vstest.executionengine.x86.exe' (CLR v4.0.30319: vstest.executionengine.x86.exe): Loaded 'C:\Windows\assembly\GAC\Microsoft.VisualStudio.Shell.Interop.9.0\9.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Shell.Interop.9.0.dll'. Module was built without symbols.
推荐答案
实际上，经过一些研究，我发现罪魁祸首是使用TestSettings1.testsettings而不是test.runsettings.
Actually, after some research I found out that the main culprit was the usage of TestSettings1.testsettings instead of test.runsettings.
经过一段时间的调整，(主要是由于缺少Global DeploymentItems，我使用基类解决了)，这些测试现在可以在10秒以内运行，这是更好的选择.
After a bit of time adapting the tests, (mostly due to the lack of Global DeploymentItems, which I solved using a base class), the tests are now running under 10s which is way better.
虽然仍然有改进的余地，但我至少现在对此感到满意
Think there´s still room for improvement though, but I´m at least satisfied for now
这篇关于MStest加载时间太长的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！