问题描述
好的，只需通过物联网核心仪表板设置RPi3B，它就可以在默认分辨率1920x1080下正常启动。  我希望远程显示工作，但在1920x1080我有白屏。 因此，根据微软的建议，我试图将我的
RPi3B的分辨率更改为800x600。 我的第一次尝试导致屏幕上出现紫色网格划线。 我怀疑我可能设置了错误的刷新率。 所以我再次重新创建了SD卡，这次我确保我在60Hz时使用了800x600
。  我想这一次我做得更远了： 我到了蓝色的窗户徽标屏幕和它下方的虚线圆圈。  现在差不多2小时了，它还在那里，所以我怀疑自己被困在了某个地方。  任何线索？
我的主要目标是使远程显示工作，所以任何其他建议将不胜感激。 提前致谢！
Ok, just setup the RPi3B via IoT Core Dashboard and it booted up fine at default resolution of 1920x1080. I wanted to get remote display working but at 1920x1080 I got white screen. So as per Microsoft's advice, I tried to change my RPi3B's resolution to 800x600. My first try resulted in some stuck screen w/ purple grid lines across. I suspect I may have setup the wrong refresh rate. So I recreated the SD card again and this time I made sure I used 800x600 at 60Hz. I think this time I made it a bit further: I got to the blue window logo screen and a dotted circle below it. It's been almost 2hr now and it's still there so I suspect I'm stuck somewhere. Any clue? My main objective is to get remote display working so any other suggestion would be greatly appreciated. Thanks in advance!
推荐答案
我的主要目标是使远程显示工作，所以任何其他建议将不胜感激。
Windows IoT远程客户端不适用于Raspberry Pi，这是一个已知问题，也在发行说明中提到
the Windows IoT Remote client does not work for Raspberry Pi, that's a known issue and also mentioned in release notes
https://docs.microsoft.com/en-us/windows/iot-core/release-notes/commercial/fallcreatorsupdate
Microsoft正在开发修复，但目前没有ETA
Microsoft is working on a fix but there is currently no ETA
br
Andre
这篇关于在Win10物联网16299上的RPi 3B分辨率更改为800x600，重新启动卡在Windows蓝色标志屏幕的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！