问题描述
我为 ARM 交叉编译了一个 Helloworld 可执行文件.它在我朋友的开发板上运行良好，但由于我的开发板上出现分段错误"而失败.两块板在硬件和软件上都略有不同.
I cross-compiled a Helloworld executable for ARM. It worked well on my friend's development board, but failed with a " segmentation fault " on my board. The two boards are slightly different in both hardware and software.
我的问题是，如何在我的电路板中进行调试?这么简单的程序调试起来是不是比较容易?这是否表明可执行文件没有任何问题，问题很可能出在我的板子的文件系统中?
My question is, how can I debug in my board? Is it relatively easy to debug such a simple program? Does it indicate that there's nothing wrong with the executable and the problem most probably lies in the filesystem of my board?
代码如下:
#include <QApplication>
#include <QPushButton>
int main(int argc, char *argv[])
{
QApplication app(argc, argv);
QPushButton hello("Hello world");
hello.resize(100, 30);
hello.show();
return app.exec();
}
可执行文件由以下命令生成:
And the executable is generated by the following commands:
qmake -project
qmake
make
推荐答案
gdb 很可能被移植到 ARM 目标上运行，但如果缺少该目标或为了便于调试，您应该使用 gdb 远程调试.http://sourceware.org/gdb/onlinedocs/gdb/Remote-Debugging.html#Remote-Debugging
most probably gdb is ported to be run on ARM target but in case lack of that or for easy debugging, you should use gdb remote debugging.http://sourceware.org/gdb/onlinedocs/gdb/Remote-Debugging.html#Remote-Debugging
Gdbserver 是应该在目标上运行的应用程序.下面是如何使用它的演示.(复制自维基百科)
Gdbserver is the application should be run on target. the following is demonstration howto use it. (copied from wikipedia)
目标设置:
remote$ gdbserver :2345 hello_world
Process hello_world created; pid = 2509
Listening on port 2345
主机设置:
local$ gdb -q hello_world
Reading symbols from /home/user/hello_world...done.
(gdb) target remote 192.168.0.11:2345
Remote debugging using 192.168.0.11:2345
0x002f3850 in ?? () from /lib/ld-linux.so.2
(gdb) continue
Continuing.
Program received signal SIGSEGV, Segmentation fault.
0x08048414 in main () at hello_world.c:10
10 printf("x[%d] = %g\n", i, x[i]);
(gdb)
这篇关于在嵌入式系统上运行 Qt Helloworld 时出现分段错误的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！