本文介绍了将Raspberry Pi连接到Azure IoT中心时发生错误的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

我正在使用https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-raspberry-pi-kit-node-get-started将温度和湿度传感器连接到IoT中心,但位于在Pi上运行示例应用程序"处,部分,第4步,我收到以下错误消息:

I am using https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-raspberry-pi-kit-node-get-started for connecting temp and humidity sensor to IoT Hub, but at "Run a sample application on Pi" section, step 4,  I get te following error:

文件夹内容为:

我需要帮助来完成使温度和湿度传感器启动并运行的过程.

I need help to complete the procedure to get the temp and humidity sensor up and running.

提前谢谢!

推荐答案

今天我正在使用"https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-raspberry-pi-kit-c-get-started".我被困在配置示例应用程序"当执行"sudo ./setup.sh"时,步骤2.它被卡在 克隆为接线Pi"":

Today I am using "https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-raspberry-pi-kit-c-get-started". I am stucked at "Configure the sample application" section, step 2. When executing "sudo ./setup.sh" it is stucked at "Cloning into 'wiring Pi'":

任何帮助将不胜感激!


这篇关于将Raspberry Pi连接到Azure IoT中心时发生错误的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持!

07-31 09:58