本文介绍了在Android 2.1（三星spica i5700）蓝牙的问题，其中配对工作，但连接不工作的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我有一个三星Spica i5700，我已经更新到Android 2.1。我使用的电话与一个名为Run.GPS的应用程序（）。这个应用程序记录的数据，如GPS位置，路线，速度，轴承等。它也可以记录心率，只要用户有一个Zephyr HxM蓝牙心率监测器（HxM），我有。
I have a Samsung Spica i5700 which I already have updated to Android 2.1. I am using the phone with an application called Run.GPS (http://www.rungps.net). This application logs data such as GPS position, route, speed, bearing etc. It can also log heartrate provided the user has a Zephyr HxM bluetooth heart rate monitor ("HxM"), which I do have.
我可以通过标准蓝牙实用程序将HxM与手机配对。系统提示我输入PIN，并且设备显示为已配对但未连接。
I can pair the HxM to the phone through the standard bluetooth utility. I'm prompted for the PIN, which I enter and the device is shown as 'Paired but not connected'.
在Run.GPS应用程序中， 连接心率监测器。这会在大约30秒后超时，并且错误消息为无法连接到心率监视器。请尝试其他设置。
In the Run.GPS application itself, I click on 'Connect Heartrate Monitor'. This times out after about 30 seconds and the error message is 'Could not connect to heartrate monitor. Please try other settings'.
我使用朋友的HTC Windows Mobile作为控制设备，看看HxM是否在那里工作。它做。 Run.GPS应用程序自动设置波特率（最初为9600 IIRC，尽管连接也使用较高的波特率），并且可以在各种COM端口以及.Net COM端口之间进行选择。
I used a friend's HTC Windows Mobile as a control device to see if the HxM works there. It does. The Run.GPS application automatically sets the baud rate (initially to 9600 IIRC, though the connection also worked with higher baud rates) and it is possible to choose between various COM ports as well as a .Net COM port.
我在Spica Android上做了一些测试，试图找出为什么蓝牙连接不工作。下面是当我在Run.GPS应用程序中点击连接到心率监测器时通过adb连接的一些日志文件。
I did some testing on my Spica Android, to try to find out why the bluetooth connection doesn't work. Below are some log files that I connected over adb when I clicked on 'Connect to Heartrate Monitor' in the Run.GPS application.
我会对任何提示感兴趣包括如果我发布到错误的论坛在这里; - ）） - 是否可能实验波特率在Android等我仍然不知道是否是Run.GPS应用程序的问题（我' ve发布已经在开发论坛上）或与Android 2.1。我检查了另一个应用程序 - Endomondo - 这也是一个运动跟踪应用程序，支持心率监测器只与HxM。在那里，看起来完全相同的错误发生了 - 我点击连接Zephyr HxM。几秒钟后，我被显示为正在连接...状态，但随后它超时到未连接。
I would be interested in any tips (including if I'm posting to the wrong forum here ;-)) - whether or not it's possible to experiment with the baud rate in Android etc. I still don't know if the problem is with the Run.GPS application (I've posted already on the development forum there) or with Android 2.1. I checked out another application - Endomondo - which is also a sport tracking application which supports heartrate monitor only with the HxM. There, what looked like exactly the same error occurred - I clicked on 'Connect Zephyr HxM'. For a few seconds I was shown the 'Connecting...' status, but then it timed out into 'Not Connected'. I'm thus tending towards looking at Android for the problem.
以下是adb logcat在尝试连接时的输出：
./adb logcat | grep Run.GPS
D/WYNEX> (11551): Excute :: Run.GPS Trainer UV, (null)
E/Run.GPS (11997): Cannot connect to BT device
E/Run.GPS (11997): java.io.IOException: Service discovery failed
E/Run.GPS (11997): at android.bluetooth.BluetoothSocket$SdpHelper.doSdp(BluetoothSocket.java:374)
E/Run.GPS (11997): at android.bluetooth.BluetoothSocket.connect(BluetoothSocket.java:184)
E/Run.GPS (11997): at ju.a(Unknown Source)
E/Run.GPS (11997): at qk.j(Unknown Source)
E/Run.GPS (11997): at fs.c(Unknown Source)
E/Run.GPS (11997): at le.a(Unknown Source)
E/Run.GPS (11997): at s.b(Unknown Source)
E/Run.GPS (11997): at pb.a(Unknown Source)
E/Run.GPS (11997): at as.a(Unknown Source)
E/Run.GPS (11997): at am.b(Unknown Source)
E/Run.GPS (11997): at gf.onTouchEvent(Unknown Source)
E/Run.GPS (11997): at android.view.View.dispatchTouchEvent(View.java:3709)
E/Run.GPS (11997): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884)
E/Run.GPS (11997): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884)
E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow$DecorView.superDispatchTouchEvent(PhoneWindow.java:1665)
E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow.superDispatchTouchEvent(PhoneWindow.java:1107)
E/Run.GPS (11997): at android.app.Activity.dispatchTouchEvent(Activity.java:2061)
E/Run.GPS (11997): at com.android.internal.policy.impl.PhoneWindow$DecorView.dispatchTouchEvent(PhoneWindow.java:1649)
E/Run.GPS (11997): at android.view.ViewRoot.handleMessage(ViewRoot.java:1694)
E/Run.GPS (11997): at android.os.Handler.dispatchMessage(Handler.java:99)
E/Run.GPS (11997): at android.os.Looper.loop(Looper.java:123)
E/Run.GPS (11997): at android.app.ActivityThread.main(ActivityThread.java:4363)
E/Run.GPS (11997): at java.lang.reflect.Method.invokeNative(Native Method)
E/Run.GPS (11997): at java.lang.reflect.Method.invoke(Method.java:521)
E/Run.GPS (11997): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860)
E/Run.GPS (11997): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618)
E/Run.GPS (11997): at dalvik.system.NativeStart.main(Native Method)
E/Run.GPS (11997): Cannot connect to BT device
E/Run.GPS (11997): java.io.IOException: Service discovery failed
这是尝试连接心率监测器时输出的dmesg
<4>[74726.239833] select 11691 (.serviceModeApp), adj 15, size 3205, to kill
<4>[74726.240741] select 11739 (com.wssnps), adj 15, size 3207, to kill
<4>[74726.246870] select 11750 (id.partnersetup), adj 15, size 3219, to kill
<4>[74726.253390] select 11857 (p.bluetoothicon), adj 15, size 3299, to kill
<4>[74726.259879] select 13131 (ndroid.settings), adj 15, size 4586, to kill
<4>[74726.266372] send sigkill to 13131 (ndroid.settings), adj 15, size 4586
<7>[74733.945097] [BT] GPIO_BT_WAKE = 1
<7>[74733.945121] [BT] wake_lock(bt_wake_lock)
<7>[74733.951799] [BT] GPIO_BT_HOST_WAKE = 1
<7>[74733.951822] [BT] wake_lock timeout = 5 sec
<7>[74735.890196] [BT] GPIO_BT_HOST_WAKE = 0
<7>[74736.150987] [BT] GPIO_BT_HOST_WAKE = 1
<7>[74736.151009] [BT] wake_lock timeout = 5 sec
<7>[74737.490185] [BT] GPIO_BT_HOST_WAKE = 0
<7>[74740.073913] [BT] GPIO_BT_HOST_WAKE = 1
<7>[74740.073948] [BT] wake_lock timeout = 5 sec
<7>[74741.315336] [BT] GPIO_BT_HOST_WAKE = 0
<7>[74743.249747] [BT] GPIO_BT_HOST_WAKE = 1
<7>[74743.249768] [BT] wake_lock timeout = 5 sec
<7>[74744.865099] [BT] GPIO_BT_HOST_WAKE = 0
<7>[74745.154487] [BT] GPIO_BT_HOST_WAKE = 1
<7>[74745.154509] [BT] wake_lock timeout = 5 sec
<7>[74748.852534] [BT] GPIO_BT_HOST_WAKE = 0
<7>[74749.156256] [BT] GPIO_BT_HOST_WAKE = 1
<7>[74749.156278] [BT] wake_lock timeout = 5 sec
<7>[74750.490018] [BT] GPIO_BT_HOST_WAKE = 0
<4>[74754.230424] select 11691 (.serviceModeApp), adj 15, size 3191, to kill
<4>[74754.231326] select 11739 (com.wssnps), adj 15, size 3193, to kill
<4>[74754.237473] select 11750 (id.partnersetup), adj 15, size 3205, to kill
<4>[74754.243950] select 11857 (p.bluetoothicon), adj 15, size 3283, to kill
<4>[74754.250452] select 13140 (com.svox.pico), adj 15, size 3465, to kill
<4>[74754.256787] send sigkill to 13140 (com.svox.pico), adj 15, size 3465
这里是logcat输出当我在Endomondo中点击connect zephyr时
I/PUSH Event(19147): MotionEvent : QueuedEvent{43d7d480 MotionEvent{440b5680 action=1 x=228.28438 y=212.55624 pressure=0.0 size=0.0}}
D/BluetoothZephyrService(23605): connect to: 00:07:80:88:F5:AD
D/BluetoothSocket(23605): BluetoothSocket created fd: -1uuid00001101-0000-1000-8000-00805f9b34fbport -1
D/BluetoothSocket.cpp(23605): initSocketNative
I/BLZ20_WRAPPER(23605): blz20_wrp_socket: fam 31, type 1, prot BTPROTO_RFCOMM
D/BLZ20_WRAPPER(23605): blz20_init: initializing...
D/BTL_IFC_WRP(23605): wsactive_init: init active list
I/BTL_IFC (23605): main_client_thread: Client main thread starting
D/BLZ20_WRAPPER(23605): blz20_init: success
I/BTL_IFC (23605): BTL_IFC_RegisterSubSystem: Register subsystem [(null)]
I/BTL_IFC (23605): btl_ifc_ctrl_connect: Connect control channel for subsystem [(null)]
D/BTL_IFC_WRP(23605): wrp_sock_create: CTRL
D/BTL_IFC_WRP(23605): wrp_alloc_new_sock: wrp_alloc_new_sock sub 1
D/BTL_IFC_WRP(23605): wrp_sock_create: 28
D/BTL_IFC_WRP(23605): wrp_sock_connect: wrp_sock_connect 127.0.0.1:9000 (28)
I/BTL-IFS (21889): main_server_thread: [CTRL] Client connected (14)
I/BTL_IFC_WRP(23605): wrp_sock_connect: Connected. (28)
I/BTL_IFC (23605): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_REGISTER_SUBSYS_REQ ((null)) 0 pbytes (hdl 28)
I/BTL-IFS (21889): attach_client: multiclient index 1
I/BTL-IFS (21889): attach_client: ######## Attached client subsystem (14) ########
I/BTL-IFS (21889): btl_if_notify_local_event: Notify local event BTLIF_SUBSYSTEM_ATTACHED
D/ (21889): btlif_bts_api_ctrl_cb: btlif_bts_api_ctrl_cb : id BTLIF_SUBSYSTEM_ATTACHED (4112) on hdl 14
I/ (21889): btlif_rfc_ctrl_chan_attached: client attached ctrl handle 14
D/BTL-IFS (21889): send_registration_rsp: send_registration_rsp [0]
I/BTL-IFS (21889): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_REGISTER_SUBSYS_RSP (CTRL) 2 pbytes (hdl 14)
D/BTL_IFC (23605): BTL_IFC_RegisterSubSystem: add new ctrl fd to active set
D/BTL_IFC_WRP(23605): wrp_wsock_create: (null)
D/BTL_IFC_WRP(23605): wrp_alloc_new_sock: wrp_alloc_new_sock sub 15
D/BTL_IFC_WRP(23605): wrp_wsock_create: 32
D/BLZ20_WRAPPER(23605): btsk_alloc_add: success
I/BLZ20_WRAPPER(23605): blz20_wrp_socket: return 32
D/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: fd (-1:32), bta -1, rc 0, wflags 0x0
I/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: configure rfcomm lm mode 0x26, (master:0, auth 1, enc 1)
I/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: success
D/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: fd (-1:32), bta -1, rc 0, wflags 0x0
I/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: configure rfcomm sndbuf len 71680 bytes
I/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: success
D/BluetoothSocket.cpp(23605): ...fd 32 created (RFCOMM, lm = 26)
D/BluetoothSocket.cpp(23605): initSocketFromFdNative
D/BluetoothZephyrService(23605): setState() 0 -> 2
I/BluetoothZephyrService(23605): BEGIN mConnectThread
E/BluetoothService.cpp(19147): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session)
D/BluetoothSocket(23605): connect
D/BluetoothSocket(23605): doSdp
I/BluetoothService.cpp(19147): ... Object Path = /org/bluez/21902/hci0/dev_00_07_80_88_F5_AD
I/BluetoothService.cpp(19147): ... Pattern = 00001101-0000-1000-8000-00805f9b34fb, strlen = 36
I/BluetoothZephyr(23605): MESSAGE_STATE_CHANGE: 2
D/DEVICE (21902): *************DiscoverServices********
I/DTUN_HCID(21902): dtun_client_get_remote_svc_channel: starting discovery on (uuid16=0x0011)
I/DTUN_HCID(21902): bdaddr=00:07:80:88:F5:AD
I/DTUN_CLNT(21902): Client calling DTUN_METHOD_DM_GET_REMOTE_SERVICE_CHANNEL (id 4)
I/ (21889): DTUN_ReceiveCtrlMsg: [DTUN] Received message [BTLIF_DTUN_METHOD_CALL] 4354
I/ (21889): handle_method_call: handle_method_call :: received DTUN_METHOD_DM_GET_REMOTE_SERVICE_CHANNEL (id 4), len 134
E/BTLD (21889): ****************search UUID = 1101***********
I//system/bin/btld(21888): btapp_dm_GetRemoteServiceChannel()
W/BTLD (21889): SDP - Rcvd conn cnf with error: 0x4 CID 0x42
I/BTL-IFS (21889): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 13 pbytes (hdl 10)
I/DTUN_CLNT(21902): dtun-rx signal [DTUN_SIG_DM_RMT_SERVICE_CHANNEL] (id 42) len 15
I/DTUN_HCID(21902): dtun_dm_sig_rmt_service_channel: success=1, service=00000000
E/DTUN_HCID(21902): discovery unsuccessful!
V/BluetoothEventRedirector(21741): Received android.bleutooth.device.action.UUID
E/CachedBluetoothDevice(21741): onUuidChanged: Time since last connect9266997
D/BluetoothService(19147): Cleaning up failed UUID channel lookup: 00:07:80:88:F5:AD 00001101-0000-1000-8000-00805f9b34fb
D/BluetoothSocket(23605): onRfcommChannelFound -1
D/BluetoothZephyrService(23605): setState() 2 -> 1
D/BluetoothSocket(23605): close
D/BluetoothSocket(23605): cancel
D/BluetoothSocket.cpp(23605): abortNative
D/BluetoothSocket.cpp(23605): ...asocket_abort(32) complete
D/BluetoothSocket.cpp(23605): destroyNative
D/BluetoothSocket.cpp(23605): ...asocket_destroy(32) complete
D/BluetoothZephyrService(23605): start
D/BluetoothSocket(23605): close
D/BluetoothSocket(23605): BluetoothSocket created fd: -1uuidnullport 1
D/BluetoothSocket.cpp(23605): initSocketNative
I/BLZ20_WRAPPER(23605): blz20_wrp_socket: fam 31, type 1, prot BTPROTO_RFCOMM
D/BTL_IFC_WRP(23605): wrp_wsock_create: (null)
D/BTL_IFC_WRP(23605): wrp_alloc_new_sock: wrp_alloc_new_sock sub 15
D/BTL_IFC_WRP(23605): wrp_wsock_create: 32
D/BLZ20_WRAPPER(23605): btsk_alloc_add: success
D/BLZ20_WRAPPER(23605): btsk_dump_list: fd (-1:32), bta -1, rc 0, wflags 0x0
I/BLZ20_WRAPPER(23605): blz20_wrp_socket: return 32
E/BLZ20_WRAPPER(23605): ##### ERROR : btsk_check_duplicates: WARNING : duplicate entries found for key 4, val 32#####
D/BLZ20_WRAPPER(23605): btsk_check_duplicates: fd (-1:32), bta -1, rc 0, wflags 0x0
D/BLZ20_WRAPPER(23605): btsk_check_duplicates: fd (-1:32), bta -1, rc 0, wflags 0x0
E/BLZ20_WRAPPER(23605): ##### ERROR : btsk_check_duplicates: ### ASSERT : frameworks/base/core/jni/../../../../vendor/brcm/adaptation/btl-if/client/blz20_wrapper.c line 534 duplicates found (2) ########
D/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: fd (-1:32), bta -1, rc 0, wflags 0x0
I/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: configure rfcomm lm mode 0x26, (master:0, auth 1, enc 1)
I/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: success
E/BLZ20_WRAPPER(23605): ##### ERROR : btsk_check_duplicates: WARNING : duplicate entries found for key 4, val 32#####
D/BLZ20_WRAPPER(23605): btsk_check_duplicates: fd (-1:32), bta -1, rc 0, wflags 0x0
D/BLZ20_WRAPPER(23605): btsk_check_duplicates: fd (-1:32), bta -1, rc 0, wflags 0x0
E/BLZ20_WRAPPER(23605): ##### ERROR : btsk_check_duplicates: ### ASSERT : frameworks/base/core/jni/../../../../vendor/brcm/adaptation/btl-if/client/blz20_wrapper.c line 534 duplicates found (2) ########
D/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: fd (-1:32), bta -1, rc 0, wflags 0x0
I/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: configure rfcomm sndbuf len 71680 bytes
I/BLZ20_WRAPPER(23605): blz20_wrp_setsockopt: success
D/BluetoothSocket.cpp(23605): ...fd 32 created (RFCOMM, lm = 26)
D/BluetoothSocket.cpp(23605): initSocketFromFdNative
D/BluetoothSocket(23605): bindListen
D/BluetoothSocket.cpp(23605): bindListenNative
I/BLZ20_WRAPPER(23605): blz20_wrp_bind: s 32
E/BLZ20_WRAPPER(23605): ##### ERROR : btsk_check_duplicates: WARNING : duplicate entries found for key 4, val 32#####
D/BLZ20_WRAPPER(23605): btsk_check_duplicates: fd (-1:32), bta -1, rc 0, wflags 0x0
D/BLZ20_WRAPPER(23605): btsk_check_duplicates: fd (-1:32), bta -1, rc 0, wflags 0x0
E/BLZ20_WRAPPER(23605): ##### ERROR : btsk_check_duplicates: ### ASSERT : frameworks/base/core/jni/../../../../vendor/brcm/adaptation/btl-if/client/blz20_wrapper.c line 534 duplicates found (2) ########
D/BLZ20_WRAPPER(23605): blz20_wrp_bind: bind socket fd (-1:32), bta -1, rc 0, wflags 0x0
D/BLZ20_WRAPPER(23605): __bind_prot_rfcomm: rc_chan 1
D/BTL_IFC_WRP(23605): wrp_sock_bind: wrp_sock_bind on port 9050
I/BLZ20_WRAPPER(23605): blz20_wrp_listen: s 32, backlog 1
E/BLZ20_WRAPPER(23605): ##### ERROR : btsk_check_duplicates: WARNING : duplicate entries found for key 4, val 32#####
D/BLZ20_WRAPPER(23605): btsk_check_duplicates: fd (-1:32), bta -1, rc 1, wflags 0x0
D/BLZ20_WRAPPER(23605): btsk_check_duplicates: fd (-1:32), bta -1, rc 0, wflags 0x0
E/BLZ20_WRAPPER(23605): ##### ERROR : btsk_check_duplicates: ### ASSERT : frameworks/base/core/jni/../../../../vendor/brcm/adaptation/btl-if/client/blz20_wrapper.c line 534 duplicates found (2) ########
D/BLZ20_WRAPPER(23605): blz20_wrp_listen: fd (-1:32), bta -1, rc 1, wflags 0x0
D/BLZ20_WRAPPER(23605): btlif_send_msg_wait_response: send BTLIF_BTS_RFC_LISTEN_REQ, wait for |BTLIF_BTS_RFC_LISTEN_RSP|
D/BTL_IFC (23605): BTL_IFC_CtrlSend: BTL_IFC_CtrlSend
I/BTL_IFC (23605): send_ctrl_msg: [BTL_IFC CTRL] send BTLIF_BTS_RFC_LISTEN_REQ ((null)) 20 pbytes (hdl 28)
D/ (21889): btlif_bts_api_ctrl_cb: btlif_bts_api_ctrl_cb : id BTLIF_BTS_RFC_LISTEN_REQ (4433) on hdl 14
I/ (21889): btlif_rfc_listen_req: Allocated dynamic server channel 4
D/ (21889): bts_chan_alloc_add: bts_chan_alloc_add : success (tot 1)
D/ (21889): bts_chan_dump_all: ### channel list ###
D/ (21889): bts_chan_dump_all: type 3, dhdl -1, bta_hdl -1, scn -1, phdl 65535, lstpnd 0, -1:-1 (L:D)
I/ (21889): btlif_rfc_listen_req: start rfcomm server on scn 4, role 1, sec_mask 0x30
D/ (21889): jw_if_rfcomm_srv_cback: event=BTA_JV_RFCOMM_START_EVT
I/ (21889): jw_if_rfcomm_srv_cback: [BTA_JV_RFCOMM_START_EVT] start status: 0, handle:0, security id: 47
I/ (21889): jv_rfc_srv_listen_started: jv_rfc_srv_listen_started
I/BTL-IFS (21889): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_BTS_RFC_LISTEN_RSP () 17 pbytes (hdl 14)
I/BTL_IFC (23605): btl_ifc_ctrl_rx: [BTL_IFC CTRL] recv BTLIF_BTS_RFC_LISTEN_RSP ((null)) 19 pbytes (hdl 28)
I/BLZ20_WRAPPER(23605): btlif_ctrl_callback: btlif_ctrl_callback : msg id BTLIF_BTS_RFC_LISTEN_RSP
E/BLZ20_WRAPPER(23605): ##### ERROR : btsk_check_duplicates: WARNING : duplicate entries found for key 4, val 32#####
D/BLZ20_WRAPPER(23605): btsk_check_duplicates: fd (-1:32), bta -1, rc 1, wflags 0x2
D/BLZ20_WRAPPER(23605): btsk_check_duplicates: fd (-1:32), bta -1, rc 0, wflags 0x0
E/BLZ20_WRAPPER(23605): ##### ERROR : btsk_check_duplicates: ### ASSERT : frameworks/base/core/jni/../../../../vendor/brcm/adaptation/btl-if/client/blz20_wrapper.c line 534 duplicates found (2) ########
I/BLZ20_WRAPPER(23605): btlif_process_listen_rsp: listen response for bta hdl 0
D/BLZ20_WRAPPER(23605): btlif_signal_event: fd (-1:32), bta 0, rc 1, wflags 0x2
D/BLZ20_WRAPPER(23605): btlif_signal_event: event BTLIF_BTS_RFC_LISTEN_RSP matched
D/BLZ20_WRAPPER(23605): btlif_send_msg_wait_response: unblocked fd (-1:32), bta 0, rc 1, wflags 0x0
I/BLZ20_WRAPPER(23605): __listen_prot_rfcomm: success, scn 4
D/BTL_IFC_WRP(23605): wrp_sock_listen_bl: wrp_sock_listen_bl : fd 32 127.0.0.1:9050 backlog 1
I/BLZ20_WRAPPER(23605): __listen_prot_rfcomm: success
D/BluetoothSocket.cpp(23605): ...bindListenNative(32) success
I/DTUN_CLNT(21902): Client calling DTUN_METHOD_DM_ADD_SDP_REC (id 17)
I/ (21889): DTUN_ReceiveCtrlMsg: [DTUN] Received message [BTLIF_DTUN_METHOD_CALL] 4354
I/ (21889): handle_method_call: handle_method_call :: received DTUN_METHOD_DM_ADD_SDP_REC (id 17), len 270
I/ (21889): btapp_bts_convert_rc_chan_to_scn: found scn 4
I/BTL-IFS (21889): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 12 pbytes (hdl 10)
I/DTUN_CLNT(21902): dtun-rx signal [DTUN_SIG_DM_SDP_REC_HANDLE] (id 50) len 14
I/DTUN_HCID(21902): dtun_dm_sig_sdp_rec_handle: handle = 0x10006
D/BluetoothService(19147): new handle 0
I/BluetoothZephyr(23605): MESSAGE_STATE_CHANGE: 1
I/BluetoothZephyr(23605): Unable to connect device
D/BluetoothZephyrService(23605): setState() 1 -> 1
D/BluetoothZephyrService(23605): BEGIN mAcceptThreadThread[Thread-9,5,main]
D/BluetoothSocket(23605): accept
D/BluetoothSocket.cpp(23605): acceptNative
I/BluetoothZephyr(23605): MESSAGE_STATE_CHANGE: 1
D/WynexActivity(19215): <><><>ACTION ::android.intent.action.TIME_TICK
D/LocationMasfClient(19147): getNetworkLocation(): Location not found in cache, making network request
D/ProtoRequestListener(19147): requestFailed()
I/power (19147): *** set_screen_state 0
推荐答案
好，解决了。
解决方案是更新手机上的固件。我现在有：
PDA：I570EXXJE1
电话：i570EXXJD1
CSC：I570EOXEJE1
The solution is to update the firmware on the phone. I now have:PDA: I570EXXJE1PHONE: i570EXXJD1CSC: I570EOXEJE1
和蓝牙spp工作开箱即用
and bluetooth spp worked 'out of the box'.
查看用于最新的固件以及用于闪光电话（odin）和详细信息/教程的程序。
Look at http://samsung-firmwares.com for both the latest firmware as well as programs to flash the phone (odin) and details/tutorials.
这篇关于在Android 2.1（三星spica i5700）蓝牙的问题，其中配对工作，但连接不工作的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！