如何通过CDMA调制解调器发送短信

问题描述

我正在尝试通过at命令从cdma调制解调器发送短信.我怎样才能做到这一点.任何人都可以通过源代码或帮助链接来帮助我.

我已经尝试过使用文章
''使用AT命令通过GSM调制解调器发送和读取SMS
作者Syeda Anila Nusrat''
在GSM调制解调器中还可以，但是当我尝试将其连接到CDMA调制解调器时却无法正常工作.在行"AT + CMGF = 1"上引发异常.

I am trying to send sms from cdma modem by at command. how can i do that. can anybody help me by source code or help link.

I have tried using article
''Send and Read SMS through GSM Modem using AT Commands
By Syeda Anila Nusrat''
it is ok in GSM modem, but when i am trying it to CDMA modem it is not working. throwing exception on line ''AT+CMGF=1''.

推荐答案

Su_shamim写道:

Su_shamim wrote:

我尝试使用文章
''使用AT命令通过GSM调制解调器发送和读取SMS
作者Syeda Anila Nusrat''
在GSM调制解调器中还可以，但是当我尝试将其连接到CDMA调制解调器时却无法正常工作.在行"AT + CMGF = 1"上引发异常.

I have tried using article
''Send and Read SMS through GSM Modem using AT Commands
By Syeda Anila Nusrat''
it is ok in GSM modem, but when i am trying it to CDMA modem it is not working. throwing exception on line ''AT+CMGF=1''.

首先，必须在文章结束后的文章常见问题解答"部分提出这个问题.

First of all, this question must be put up in the article FAQ section which is just after the article ends.

Su_shamim写道:

Su_shamim wrote:

在"AT + CMGF = 1"行上抛出了异常.

throwing exception on line ''AT+CMGF=1''.

这意味着不支持文本模式，您将不得不使用PDU模式.本文不支持PDU模式，因此请尝试另一种. :thumbsup:

It means text mode is not supported and you will have to work with PDU mode. This article doesn''t support PDU mode so try the other one. :thumbsup:

这篇关于如何通过CDMA调制解调器发送短信的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！