问题描述
现在是否有使用pyqtgraph，qt5，theano，pymc3，numpy，scipy，os和sys的模块从python 3.5+构建.exe的简单协议，并打开存储在'.ui'文件中的简单GUI ？我浪费了几个小时，最终没能做到（用w7-64位）。
Is there now an easy protocol to build a .exe from python 3.5+, using modules pyqtgraph, qt5, theano, pymc3, numpy, scipy, os and sys, and opening a simple GUI stored in a '.ui' file ? I lost hours and eventually failed to make one (for w7-64 bits). Help !
py2exe的初步故障：我首先为python 3安装py2exe，但事实证明这与我的python 3.6不兼容，所以我降级为python 3.5…得到很多错误。然后我去了论坛，尝试了建议的解决方法，但是失败了（我对Windows感到不安），另一种选择是降级到python 3.4…所以我降级到python 3.4以获得关于我丢失的 msvcr100.dll的错误试图在论坛上安装以下说明，但是默认情况下我没有修改系统目录的权限...当我最终拥有此权限时，结果证明'regsvr32'命令失败（不是32位吗？但是没有'regsvr64'...）。以下情节描述如下。
preliminary failure with py2exe: I first install py2exe for python 3 but it turns out this is not compatible with my python 3.6 yet, so I downgraded to python 3.5… to get a bunch of errors. Then I went to forums and tried the proposed cures but failed (I’m uneasy with windows), the alternative being to downgrade to python 3.4… So I downgraded to python 3.4 to get an error concerning a missing ‘msvcr100.dll’ that I tried to install following instructions on forums but by default I don’t have the permission to modify system directories… When I eventually had this permission it turns out the ‘regsvr32’ command fails (isn’t this for 32 bits ? but there is no ‘regsvr64’…). Following episodes are described below.
更新2017年8月23日，下午1点：
update august 23, 2017, 1pm:
-
我也按照建议尝试了pyinstaller，但是它失败了（请参阅我的相关问题）
我也尝试了pynsist，但失败了（链接与上面相同）
I also tried pynsist but it fails (same link than above)
下一步是什么？
9月2日下午2点更新：
update september, 2, 2pm:
我最终设法在许多情节之后用pyinstaller构建.exe。
I eventually managed to build a .exe with pyinstaller after many episodes.
Un幸运的是，我无法处理 theano模块（在我的情况下是 pymc3模块所必需的），因此我不得不修改.py文件并放弃了部分应用程序。有人可以帮我用'theano'模块为Windows 7+构建.exe吗？
Unfortunately I failed to deal with the ‘theano’ module (that is required in my case by the ‘pymc3’ module) and I had to modify the .py files and give up part of the application. Could anyone help me building a .exe for windows 7+, with the ‘theano’ module ?
请参见通过pyinstaller导入theano的python 3脚本为Windows构建.exe。
推荐答案
Pyinstaller可与Python 3.5配合使用，甚至适用于诸如tensor-flow，scipy等软件包（
Pyinstaller Works with Python 3.5 and it is working even for packages like tensor-flow, scipy , etc (The packages I worked with)
py -3.5 pip install pyinstaller然后转到C：\Users\user\AppData\Local\Programs\Python\Python35\Scripts
并运行命令then go the C:\Users\user\AppData\Local\Programs\Python\Python35\Scriptsand run the command
pyinstaller <code .py file along with directory> --onefile-onefile：用于压缩版本并获取单个文件作为输出
--onefile : is for compressing the build and get a single file as output
这篇关于如何建立适用于python 3.5 +，3.6的.exe？的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！