无法从我的Arduino传感器更新在Python（Tkinter的）传感器数据

本文介绍了无法从我的Arduino传感器更新在Python（Tkinter的）传感器数据的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！

问题描述

我学习关于Python的Tkinter的接口。我是从我的Arduino发送的随机数到我的Python接口之前测试，它的工作（它更新所有的时间），所以我认为这是将来自传感器将数据发送到工作，但事实并非如此。

I am learning about interfaces on Python Tkinter. I was testing before sending random numbers from my arduino to my Python interface, It worked (It updates all the time), so I thought it was going to work when sending data from a sensor, but it did not.

所以，这是一个考验code，如果我pressing按钮，我将不得不派出3个变量的编号为1，如果我不是，我会得到两个变量的数量2和一个随机变量。

So, this is a test code, if I am pressing the button, I would have to send 3 variables with the number 1, and if I am not, I will get 2 variables with the number 2 and one random variable.

所以，我从来没有当pressing按钮，我应该得到的值。我总是得到：随机数，2和2

So, I never get the values that I should get when pressing the button. I am always getting: random number, 2 and 2.

Arduino的：

void setup() {
  Serial.begin (9600);
  pinMode(i_presion, INPUT);
}

void loop()
{
 if(digitalRead(i_presion) == HIGH )
  {
  Serial.print(1);
  Serial.print(" ");
  Serial.print(1);
  Serial.print(" ");
  Serial.print(1);
  Serial.print(" ");
  }
 else
 {
  Serial.print(random(3,8));
  Serial.print(" ");
  Serial.print(2);
  Serial.print(" ");
  Serial.print(2);
  Serial.print(" ");
  }
}

的Python：

Python:

import serial
import time
from Tkinter import *
root = Tk()
ser = serial.Serial("/dev/cu.usbmodem1411", 9600, timeout=1)

flagCharacter = 'k'

canvas = Canvas(root, width=1920, height=1080)
canvas.pack()

photo = PhotoImage(file= r"ANDREA-FIORI2.gif")
label=Label(root, image=photo)
photo = PhotoImage(file= r"ANDREA-FIORI2.gif")
canvas.pack(side='top', fill='both', expand='yes')
canvas.create_image(0, 0, image=photo, anchor='nw')



def sensores(planeado, producido, alertas):

    canvas.create_text(390, 430, text=planeado, fill="gray", font="Helvetica 100 bold",tag="T1")
    canvas.create_text(650, 430, text=producido, fill="gray", font="Helvetica 100 bold",tag="T2")
    canvas.create_text(900, 430, text=alertas, fill="gray", font="Helvetica 100 bold",tag="T3")

    #root.after(1000,sensores)

def borrar():
    canvas.delete("T1")
    canvas.delete("T2")
    canvas.delete("T3")

def do_update():
    ser.write(flagCharacter)
    borrar()
    allitems=ser.readline(6)
    x, y, z = allitems.split()
    sensores(x, y, z)
    root.after(1000, do_update)

do_update()
root.mainloop()

为什么它是从我的传感器更新功能随机的，而不是信息的任何想法？

Any ideas of why it is updating the function random, and not information from my sensors?

无法从我的Arduino传感器更新在Python

无法从我的Arduino传感器更新在Python（Tkinter的）传感器数据

问题描述

推荐答案