问题描述
我正在运行在4.1.2和由MTK处理器和RN42蓝牙（芯片上的电路板）的。这些两个模块的一个项目，这使得使用Android平板电脑（iball 3G 7271）与每个通信其他通过蓝牙传输其中的数据。
I am working on a project which makes use of an android tablet(iball 3G 7271) that runs on 4.1.2 and is made of MTK processor AND an RN42 bluetooth (chip on a PCB).These two modules communicate with each other to transfer data among them via bluetooth.
我面对issues.wherein在我多次得到不创建连接（失败或中止）异常，指出某些情况下，我已经找到了实例描述如下：
I am facing issues.wherein at certain instances I repeatedly get exceptions stating 'Connection is not created (failed or aborted)'.I have found the instances as described below:
我从BlueTerm应用程序（从playstore）复制相关的code和做了一个示例应用程序来测试BT connectivity.Blueterm是一个应用程序来测试设备和RN42之间蓝牙连接。
I copied the relevant code from the BlueTerm app(from playstore) and made a sample app to test BT connectivity.Blueterm is an app to test bluetooth connectivity between a device and RN42.
1）我连接/断开的应用程序，以RN42，并发现它所有的工作time.Proper连接和断开发生的事情。2）我在模拟停电（通过关闭只是RN42模块），然后我断开和放大器;重新连接的应用程序和RN42与放大器之间的BT连接;发现药片得到重新连接与RN42没有太多的问题。
1) I Connected/disconnected the app to RN42,and found that it was working all the time.Proper connection and disconnection was happening.2) I Simulated power failure(by switching off just the RN42 module),I then disconnected & reconnected the BT connection between app and RN42 & found that the tablet was getting re-connected with RN42 without much issue.
3）重新安装应用程序和BT之间的连接链接到RN42
测试案例1：的重新安装之前，该应用程序是从RN42断开;后重新安装BT重新连接到RN42 result-在重新安装应用程序工作正常。
Test case 1:Before re-installation, the app was disconnected from RN42 ; result- after re-installation BT reconnection to RN42 in the re installed app works fine.
测试案例2：重新安装应用程序在连接状态，RN42前; result-重新安装BT重新连接到RN42后不会立竿见影。我跟踪了自带的测试案例2中的例外是：
Test case 2:Before re-installation the app was in connected state to RN42;result- after re-installation BT reconnection to RN42 doesnt happen.I traced that the exception that comes for Test case 2 is :
W/System.err(4603): java.io.IOException: [JSR82] connect: Connection is not created (failed or aborted).
W/System.err(4603): at android.bluetooth.BluetoothSocket.connect(BluetoothSocket.java:395)
这是个例外，现在我得到一次又一次的几天back.So我有点知道什么时候该异常可以抛出。
This was the exception I was getting again and again few days back.So now I kinda know when this exception can get thrown.
注：对于测试案例2'，这里甚至未安装和重新安装应用程序，然后尝试连接应用程序，以RN42犯规工作。我们需要重新启动平板电脑，使应用程序连接到BT again.Moreover，我甚至尝试连接真实BlueTerm应用程序（在测试案例2），但它也没有得到connected.So然后我试图关断和平板电脑上的BT.I观察到，通过切断，然后交换。在BT，然后尝试建立平板电脑和RN42之间BT连接是现在发生的事情。但是，我没有得到任何输入信号从RN42到平板电脑，但可以只发送从平板电脑数据RN42。
NOTE: For 'Test case2' ,here even un-installing and re-installing the app and then trying to connect app to RN42 doesnt work.We need to reboot the tablet to make the app connect to BT again.Moreover,I even tried connecting the real BlueTerm app(in test case 2),but it also did not get connected.So then I tried switching OFF and ON the tablet's BT.I observed that by switching off and then switching ON the BT and then trying to establish BT connection between tablet and RN42 was happening .But now, I was not getting any input signals from RN42 to tablet,but was able to just send data from tablet to RN42.
测试功能在三星S2 /盛大/结点设备：用于上述测试情形2，在这些设备上的应用程序不会获得连接至BT重新安装后，即使它是/不是经由BT之前重新安装连接RN42。
Tesing on Samsung S2/grand/nexus devices:For the above Test case2,on these devices the app does get connected to BT after re-installation,even if it was/was not connected to RN42 via BT prior to re-installation.
下面是我的应用程序的code和日志猫异常：
Below is the code of my app and the log cat exception:
BlueTerm.java
BlueTerm.java
@SuppressLint("HandlerLeak")
public class BlueTerm extends Activity {
BluetoothSocket Socket;
OutputStream DataOut;
InputStream DataIn;
// Intent request codes
private static final int REQUEST_CONNECT_DEVICE = 1;
private static final int REQUEST_ENABLE_BT = 2;
private static TextView mTitle;
// Name of the connected device
private String mConnectedDeviceName = null;
/**
* Set to true to add debugging code and logging.
*/
public static final boolean DEBUG = true;
/**
* Set to true to log each character received from the remote process to the
* android log, which makes it easier to debug some kinds of problems with
* emulating escape sequences and control codes.
*/
public static final boolean LOG_CHARACTERS_FLAG = DEBUG && false;
/**
* Set to true to log unknown escape sequences.
*/
public static final boolean LOG_UNKNOWN_ESCAPE_SEQUENCES = DEBUG && false;
/**
* The tag we use when logging, so that our messages can be distinguished
* from other messages in the log. Public because it's used by several
* classes.
*/
public static final String LOG_TAG = "BlueTerm";
// Message types sent from the BluetoothReadService Handler
public static final int MESSAGE_STATE_CHANGE = 1;
public static final int MESSAGE_READ = 2;
public static final int MESSAGE_WRITE = 3;
public static final int MESSAGE_DEVICE_NAME = 4;
public static final int MESSAGE_TOAST = 5;
// Key names received from the BluetoothChatService Handler
public static final String DEVICE_NAME = "device_name";
public static final String TOAST = "toast";
private BluetoothAdapter mBluetoothAdapter = null;
private static BluetoothSerialService mSerialService = null;
/** Called when the activity is first created. */
@Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
if (DEBUG)
Log.e(LOG_TAG, "+++ ON CREATE +++");
setContentView(R.layout.main);
mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter();
mSerialService = new BluetoothSerialService(this, mHandlerBT);
Button buzzerOn = (Button) findViewById(R.id.button1);
buzzerOn.setOnClickListener(new OnClickListener() {
@Override
public void onClick(View v) {
Log.v("BlueTerm","Buzzer button clicked");
//send("37".getBytes());
send(bigIntToByteArray(37));
}
});
Button buzzerOff = (Button) findViewById(R.id.button2);
buzzerOff.setOnClickListener(new OnClickListener() {
@Override
public void onClick(View v) {
Log.v("BlueTerm","Buzzer button clicked");
//send("37".getBytes());
send(bigIntToByteArray(30));
}
});
Button recon = (Button) findViewById(R.id.button3);
recon.setOnClickListener(new OnClickListener() {
@Override
public void onClick(View v) {
Log.v("BlueTerm","recon button clicked");
BluetoothAdapter iballAdapter = BluetoothAdapter.getDefaultAdapter();
BluetoothDevice RN42_Device = iballAdapter.getRemoteDevice("00:06:66:49:57:5F");
try {
Socket = RN42_Device.createRfcommSocketToServiceRecord(UUID.fromString("00001101-0000-1000-8000-00805F9B34FB"));
DataOut = Socket.getOutputStream();
DataIn = Socket.getInputStream();
} catch (Exception e1) {
e1.printStackTrace();
}
if (DataIn != null) {
Log.d("AppFunctions","DataIn is not null,so making it NULL");
try {DataIn.close();} catch (Exception e) {}
DataIn = null;
}
Log.i("AppFunctions", "DataOut -" + DataOut);
if (DataOut != null) {
Log.d("AppFunctions","DataOut is not null,so making it NULL");
try {DataOut.close();} catch (Exception e) {}
DataOut = null;
}
Log.i("AppFunctions", "Socket -" + Socket);
if (Socket != null) {
Log.d("AppFunctions","Socket is not null,so making it NULL");
try {Socket.close();} catch (Exception e) {}
Socket = null;
}
try {
Socket = RN42_Device.createRfcommSocketToServiceRecord(UUID.fromString("00001101-0000-1000-8000-00805F9B34FB"));
Socket.connect();
} catch (Exception e) {
e.printStackTrace();
}
if (mSerialService != null)
mSerialService.stop();
mSerialService.start();
}
});
if (DEBUG)
Log.e(LOG_TAG, "+++ DONE IN ON CREATE +++");
}
@Override
public void onStart() {
super.onStart();
if (DEBUG)
Log.e(LOG_TAG, "++ ON START ++");
mEnablingBT = false;
}
@Override
public synchronized void onResume() {
super.onResume();
if (DEBUG) {
Log.e(LOG_TAG, "+ ON RESUME +");
}
if (mSerialService != null) {
Log.v("BlueTerm","mSerialService is NOT null");
// Only if the state is STATE_NONE, do we know that we haven't started already
if (mSerialService.getState() == BluetoothSerialService.STATE_NONE) {
// Start the Bluetooth chat services
Log.v("BlueTerm","starting BT chat service");
mSerialService.start();
}
}
}
}
@Override
public synchronized void onPause() {
super.onPause();
if (DEBUG)
Log.e(LOG_TAG, "- ON PAUSE -");
}
@Override
public void onStop() {
super.onStop();
if(DEBUG)
Log.e(LOG_TAG, "-- ON STOP --");
}
@Override
public void onDestroy() {
super.onDestroy();
if (DEBUG)
Log.e(LOG_TAG, "--- ON DESTROY ---");
if (mSerialService != null)
mSerialService.stop();
}
public int getConnectionState() {
return mSerialService.getState();
}
public void send(byte[] out) {
mSerialService.write( out );
}
// The Handler that gets information back from the BluetoothService
private final Handler mHandlerBT = new Handler() {
@Override
public void handleMessage(Message msg) {
switch (msg.what) {
case MESSAGE_STATE_CHANGE:
if(DEBUG) Log.i(LOG_TAG, "MESSAGE_STATE_CHANGE: " + msg.arg1);
switch (msg.arg1) {
case BluetoothSerialService.STATE_CONNECTED:
break;
case BluetoothSerialService.STATE_CONNECTING:
break;
case BluetoothSerialService.STATE_LISTEN:
case BluetoothSerialService.STATE_NONE:
Log.d("BlueTerm","inside STATE_NONE in handler");
break;
}
break;
case MESSAGE_WRITE:
if (mLocalEcho) {
byte[] writeBuf = (byte[]) msg.obj;
}
break;
case MESSAGE_READ:
byte[] readBuf = (byte[]) msg.obj;
Log.d("incoming writebytes",""+readBuf.toString());
break;
case MESSAGE_DEVICE_NAME:
// save the connected device's name
mConnectedDeviceName = msg.getData().getString(DEVICE_NAME);
Toast.makeText(getApplicationContext(), "Connected to "
+ mConnectedDeviceName, Toast.LENGTH_SHORT).show();
break;
case MESSAGE_TOAST:
Toast.makeText(getApplicationContext(), msg.getData().getString(TOAST),
Toast.LENGTH_SHORT).show();
break;
}
}
};
public void onActivityResult(int requestCode, int resultCode, Intent data) {
if(DEBUG) Log.d(LOG_TAG, "onActivityResult " + resultCode);
switch (requestCode) {
case REQUEST_CONNECT_DEVICE:
// When DeviceListActivity returns with a device to connect
if (resultCode == Activity.RESULT_OK) {
// Get the device MAC address
String address = "00:06:66:49:57:5F";
// Get the BLuetoothDevice object
BluetoothDevice device = mBluetoothAdapter.getRemoteDevice(address);
// Attempt to connect to the device
mSerialService.connect(device);
}
break;
case REQUEST_ENABLE_BT:
// When the request to enable Bluetooth returns
if (resultCode == Activity.RESULT_OK) {
Log.d(LOG_TAG, "BT not enabled");
}
}
}
@Override
public boolean onCreateOptionsMenu(Menu menu) {
MenuInflater inflater = getMenuInflater();
inflater.inflate(R.menu.option_menu, menu);
mMenuItemConnect = menu.getItem(0);
return true;
}
@Override
public boolean onOptionsItemSelected(MenuItem item) {
switch (item.getItemId()) {
case R.id.connect:
if (getConnectionState() == BluetoothSerialService.STATE_NONE) {
String address = "00:06:66:49:57:5F";
// Get the BLuetoothDevice object
BluetoothDevice device = mBluetoothAdapter.getRemoteDevice(address);
Log.d("BlueTerm","device: " + device);
// Attempt to connect to the device
mSerialService.connect(device);
}
else
if (getConnectionState() == BluetoothSerialService.STATE_CONNECTED) {
mSerialService.stop();
mSerialService.start();
}
return true;
case R.id.preferences:
//doPreferences();
return true;
case R.id.menu_special_keys:
//doDocumentKeys();
return true;
}
return false;
}
private byte[] bigIntToByteArray( final int i ) {
BigInteger bigInt = BigInteger.valueOf(i);
return bigInt.toByteArray();
}
}
BluetoothService：
BluetoothService:
/**
* This class does all the work for setting up and managing Bluetooth
* connections with other devices. It has a thread that listens for
* incoming connections, a thread for connecting with a device, and a
* thread for performing data transmissions when connected.
*/
public class BluetoothSerialService {
// Debugging
private static final String TAG = "BluetoothReadService";
private static final boolean D = true;
private static final UUID SerialPortServiceClass_UUID = UUID.fromString("00001101-0000-1000-8000-00805F9B34FB");
// Member fields
private final BluetoothAdapter mAdapter;
private final Handler mHandler;
private ConnectThread mConnectThread;
private ConnectedThread mConnectedThread;
private int mState;
// Constants that indicate the current connection state
public static final int STATE_NONE = 0; // we're doing nothing
public static final int STATE_LISTEN = 1; // now listening for incoming connections
public static final int STATE_CONNECTING = 2; // now initiating an outgoing connection
public static final int STATE_CONNECTED = 3; // now connected to a remote device
/**
* Constructor. Prepares a new BluetoothChat session.
* @param context The UI Activity Context
* @param handler A Handler to send messages back to the UI Activity
*/
public BluetoothSerialService(Context context, Handler handler) {
mAdapter = BluetoothAdapter.getDefaultAdapter();
mState = STATE_NONE;
mHandler = handler;
// mEmulatorView = emulatorView;
}
/**
* Set the current state of the chat connection
* @param state An integer defining the current connection state
*/
private synchronized void setState(int state) {
if (D) Log.d(TAG, "setState() " + mState + " -> " + state);
mState = state;
Log.d("BluetoothSerialService","state : " + state);
// Give the new state to the Handler so the UI Activity can update
mHandler.obtainMessage(BlueTerm.MESSAGE_STATE_CHANGE, state, -1).sendToTarget();
}
/**
* Return the current connection state. */
public synchronized int getState() {
return mState;
}
/**
* Start the chat service. Specifically start AcceptThread to begin a
* session in listening (server) mode. Called by the Activity onResume() */
public synchronized void start() {
if (D) Log.d(TAG, "start");
// Cancel any thread attempting to make a connection
if (mConnectThread != null) {
mConnectThread.cancel();
mConnectThread = null;
}
// Cancel any thread currently running a connection
if (mConnectedThread != null) {
mConnectedThread.cancel();
mConnectedThread = null;
}
setState(STATE_NONE);
}
/**
* Start the ConnectThread to initiate a connection to a remote device.
* @param device The BluetoothDevice to connect
*/
public synchronized void connect(BluetoothDevice device) {
if (D) Log.d(TAG, "connect to: " + device);
// Cancel any thread attempting to make a connection
if (mState == STATE_CONNECTING) {
if (mConnectThread != null) {mConnectThread.cancel(); mConnectThread = null;}
}
// Cancel any thread currently running a connection
if (mConnectedThread != null) {mConnectedThread.cancel(); mConnectedThread = null;}
// Start the thread to connect with the given device
mConnectThread = new ConnectThread(device);
mConnectThread.start();
setState(STATE_CONNECTING);
}
/**
* Start the ConnectedThread to begin managing a Bluetooth connection
* @param socket The BluetoothSocket on which the connection was made
* @param device The BluetoothDevice that has been connected
*/
public synchronized void connected(BluetoothSocket socket, BluetoothDevice device) {
if (D) Log.d(TAG, "connected");
// Cancel the thread that completed the connection
if (mConnectThread != null) {
mConnectThread.cancel();
mConnectThread = null;
}
// Cancel any thread currently running a connection
if (mConnectedThread != null) {
mConnectedThread.cancel();
mConnectedThread = null;
}
// Start the thread to manage the connection and perform transmissions
mConnectedThread = new ConnectedThread(socket);
mConnectedThread.start();
// Send the name of the connected device back to the UI Activity
Message msg = mHandler.obtainMessage(BlueTerm.MESSAGE_DEVICE_NAME);
Bundle bundle = new Bundle();
bundle.putString(BlueTerm.DEVICE_NAME, device.getName());
msg.setData(bundle);
mHandler.sendMessage(msg);
setState(STATE_CONNECTED);
}
/**
* Stop all threads
*/
public synchronized void stop() {
if (D) Log.d(TAG, "stop");
if (mConnectThread != null) {
mConnectThread.cancel();
mConnectThread = null;
}
if (mConnectedThread != null) {
mConnectedThread.cancel();
mConnectedThread = null;
}
setState(STATE_NONE);
}
/**
* Write to the ConnectedThread in an unsynchronized manner
* @param out The bytes to write
* @see ConnectedThread#write(byte[])
*/
public void write(byte[] out) {
Log.e("BluetoothSerialService","Inside write fn" + " :" + out.toString());
// Create temporary object
ConnectedThread r;
// Synchronize a copy of the ConnectedThread
synchronized (this) {
if (mState != STATE_CONNECTED) return;
r = mConnectedThread;
}
// Perform the write unsynchronized
r.write(out);
}
/**
* Indicate that the connection attempt failed and notify the UI Activity.
*/
private void connectionFailed() {
setState(STATE_NONE);
// Send a failure message back to the Activity
Message msg = mHandler.obtainMessage(BlueTerm.MESSAGE_TOAST);
Bundle bundle = new Bundle();
bundle.putString(BlueTerm.TOAST, "Unable to connect device");
msg.setData(bundle);
mHandler.sendMessage(msg);
}
/**
* Indicate that the connection was lost and notify the UI Activity.
*/
private void connectionLost() {
setState(STATE_NONE);
// Send a failure message back to the Activity
Message msg = mHandler.obtainMessage(BlueTerm.MESSAGE_TOAST);
Bundle bundle = new Bundle();
bundle.putString(BlueTerm.TOAST, "Device connection was lost");
msg.setData(bundle);
mHandler.sendMessage(msg);
}
/**
* This thread runs while attempting to make an outgoing connection
* with a device. It runs straight through; the connection either
* succeeds or fails.
*/
private class ConnectThread extends Thread {
private final BluetoothSocket mmSocket;
private final BluetoothDevice mmDevice;
public ConnectThread(BluetoothDevice device) {
mmDevice = device;
BluetoothSocket tmp = null;
// Get a BluetoothSocket for a connection with the
// given BluetoothDevice
try {
tmp = device.createRfcommSocketToServiceRecord(SerialPortServiceClass_UUID);
} catch (IOException e) {
Log.e(TAG, "create() failed", e);
}
mmSocket = tmp;
}
public void run() {
Log.e(TAG, "BEGIN mConnectThread");
setName("ConnectThread");
// Always cancel discovery because it will slow down a connection
mAdapter.cancelDiscovery();
// Make a connection to the BluetoothSocket
try {
// This is a blocking call and will only return on a
// successful connection or an exception
mmSocket.connect();
} catch (IOException e) {
connectionFailed();
// Close the socket
try {
mmSocket.close();
} catch (IOException e2) {
Log.e(TAG, "unable to close() socket during connection failure", e2);
}
// Start the service over to restart listening mode
//BluetoothSerialService.this.start();
return;
}
// Reset the ConnectThread because we're done
synchronized (BluetoothSerialService.this) {
mConnectThread = null;
}
// Start the connected thread
connected(mmSocket, mmDevice);
}
public void cancel() {
try {
mmSocket.close();
} catch (IOException e) {
Log.e(TAG, "close() of connect socket failed", e);
}
}
}
/**
* This thread runs during a connection with a remote device.
* It handles all incoming and outgoing transmissions.
*/
private class ConnectedThread extends Thread {
private final BluetoothSocket mmSocket;
private final InputStream mmInStream;
private final OutputStream mmOutStream;
public ConnectedThread(BluetoothSocket socket) {
Log.e(TAG, "create ConnectedThread");
mmSocket = socket;
InputStream tmpIn = null;
OutputStream tmpOut = null;
// Get the BluetoothSocket input and output streams
try {
tmpIn = socket.getInputStream();
tmpOut = socket.getOutputStream();
} catch (IOException e) {
Log.e(TAG, "temp sockets not created", e);
}
mmInStream = tmpIn;
mmOutStream = tmpOut;
}
public void run() {
Log.e(TAG, "BEGIN mConnectedThread");
byte[] buffer = new byte[1024];
int bytes;
// Keep listening to the InputStream while connected
Log.e(TAG, "Entering while");
while (true) {
Log.e(TAG, "Inside while");
try {
// Read from the InputStream
bytes = 0;
Log.d("incoming bytes",""+bytes);
Log.e("BT","Inputstream :" + mmInStream);
//bytes = mmInStream.read(buffer);
bytes = mmInStream.read();
Log.d("incoming bytes",""+bytes);
//mEmulatorView.write(buffer, bytes);
// Send the obtained bytes to the UI Activity
mHandler.obtainMessage(BlueTerm.MESSAGE_READ, bytes, -1, buffer).sendToTarget();
String a = buffer.toString();
a = "";
} catch (Exception e) {
Log.e(TAG, "disconnected", e);
connectionLost();
break;
}
bytes = 0;
}
//Log.e(TAG, "Outside while");
}
/**
* Write to the connected OutStream.
* @param buffer The bytes to write
*/
public void write(byte[] buffer) {
try {
Log.d("writing to outStream byte :", buffer.toString());
mmOutStream.write(buffer);
// Share the sent message back to the UI Activity
//mHandler.obtainMessage(BlueTerm.MESSAGE_WRITE, buffer.length, -1, buffer).sendToTarget();
} catch (IOException e) {
Log.e(TAG, "Exception during write", e);
}
}
public void cancel() {
try {
mmSocket.close();
} catch (Exception e) {
Log.e(TAG, "close() of connect socket failed", e);
}
}
}
}
logcat的错误：
Logcat error:
W / System.err的（4603）：java.io.IOException异常：[JSR82]连接：连接还没有创建（失败或中止）。 W / System.err的（4603）：在android.bluetooth.BluetoothSocket.connect（BluetoothSocket.java:395）
W/System.err(4603): java.io.IOException: [JSR82] connect: Connection is not created (failed or aborted). W/System.err(4603): at android.bluetooth.BluetoothSocket.connect(BluetoothSocket.java:395)
我怀疑可能被抛出这个错误，因为该应用程序无法访问该活动的BT端口，在上述测试case.Reason是因为我看到这个网站的（请参阅回答＃19 dknop）我观察到，没有这个问题发生在我测试过on.My错误也可能是由于MTK处理器/其BT固件/ iball定制的Android问题（的)
I suspect that this error could be thrown because the app is not able to get access to the active BT port,in the above mentioned test case.Reason is because I read this site : https://code.google.com/p/android/issues/detail?id=5427 (See answer #19 by dknop)I observe that none of this issue occur on samsung s2/grand/nexus devices which I tested on.My error could also be due to MTK processors/its BT firmware/iball custom android issue.(http://redacacia.me/2012/07/17/overcoming-android-bluetooth-blues-with-reflection-method/)
有没有人遇到过类似的问题？任何帮助将是AP preciated.Many感谢！
Has anyone faced a similar problem? Any help would be appreciated.Many thanks !
推荐答案
我已经使用了这片code，使我的连接蓝牙设备（如蓝牙打印机）稳定。现在，它连接9.9次满分10分。如果仍然出现了错误复位我的蓝牙编程再次呼吁这块code然后再连接10次中有10。
I have used this piece of code to make my connectivity to Bluetooth device(i.e. Bluetooth printer) stable. Now it connect 9.9 times out of 10. If still some error occurred i reset my Bluetooth programmatically again call this piece of code then it connect 10 times out of 10.
public boolean connectToPrinter(String printerName) throws IOException
{
BluetoothAdapter.getDefaultAdapter().cancelDiscovery();
BluetoothDevice device = getPrinterByName(printerName);
if (bluetoothSocket != null)
{
bluetoothSocket.close();
}
try {
Method m=device.getClass().getMethod("createRfcommSocket", new Class[]{int.class});
bluetoothSocket= (BluetoothSocket) m.invoke(device, 1);
} catch (Exception e) {
e.printStackTrace();
}
if (bluetoothSocket == null)
return false;
bluetoothSocket.connect();
return true;
}
这里是getPrinterByName（）的code：
here is the code of getPrinterByName():
private BluetoothDevice getPrinterByName(String printerName)
{
Set<BluetoothDevice> pairedDevices = BluetoothAdapter.getDefaultAdapter().getBondedDevices();
for (BluetoothDevice device : pairedDevices)
{
Log.e("","device name: "+device.getName());
if (device.getName() == null)
continue;
if (device.getName().contains(printerName))
{
remoteDevice = device;
// pairPrinter(printerName);
return remoteDevice;
}
}
return null;
}
的BluetoothSocket是的BluetoothSocket类的对象。不要忘记在线程中运行该code，否则这将阻止你的主线程。 ： - ）
bluetoothSocket is the Object of BluetoothSocket class. and don't forget to run this code in thread otherwise this will block your Main Thread. :-)
这篇关于未创建连接（失败或中止）异常Android的蓝牙连接时抛出的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！