问题描述
由于我的问题询问的是并没有引起太大的注意，我在这里提出了另一个问题，以另一种方式来完成我需要.
Since my question asking about separating characters that are typed in an EditText into groups or blocks didn't receive much attention, I've come here with another question on an alternative way to accomplish what I need.
所以，我的想法是拥有四个具有4个字符长度的EditText.现在，我想要的是在达到限制时将焦点从用户类型更改为从EdutText到另一个.示例:假设我们有EditText A，B，C，D；首先获得焦点的是EditText A，然后当A处的字符长度达到4时，焦点将传递到EditText B，依此类推，并在D处停止.
So, my idea is to have four EditText that have 4 char length. Now what I want is to change the focus as the user type, from an EdutText to another when the limit is reached.Example: Let's say we have EditText A, B, C, D; the first to gain focus is EditText A, then when the chars length at A reach 4, the focus passes to EditText B and so on and stops At D.
我正在尝试类似下面的代码，但是当长度达到4个字符时，不需要焦点.
I'm trying something like the code bellow, but the focus is not requested when the length reaches 4 chars.
inputFieldA.requestFocus();
inputFieldA.addTextChangedListener(new TextWatcher() {
@Override
public void beforeTextChanged(CharSequence s, int start, int count, int after) {
if(s.toString().trim().length() == 4){
inputFieldB.requestFocus();
}
}
@Override
public void onTextChanged(CharSequence s, int start, int before, int count) {
}
@Override
public void afterTextChanged(Editable s) {
}
});
inputFieldB.addTextChangedListener(new TextWatcher() {
@Override
public void beforeTextChanged(CharSequence s, int start, int count, int after) {
if(s.toString().trim().length() == 4){
inputFieldC.requestFocus();
}
}
@Override
public void onTextChanged(CharSequence s, int start, int before, int count) {
}
@Override
public void afterTextChanged(Editable s) {
}
});
inputFieldC.addTextChangedListener(new TextWatcher() {
@Override
public void beforeTextChanged(CharSequence s, int start, int count, int after) {
if(s.toString().trim().length() == 4){
inputFieldD.requestFocus();
}
}
@Override
public void onTextChanged(CharSequence s, int start, int before, int count) {
}
@Override
public void afterTextChanged(Editable s) {
}
});
inputFieldD.addTextChangedListener(new TextWatcher() {
@Override
public void beforeTextChanged(CharSequence s, int start, int count, int after) {
if(s.toString().trim().length() == 4){
//send all to Main EditText (A + B + C + D)
}
}
@Override
public void onTextChanged(CharSequence s, int start, int before, int count) {
}
@Override
public void afterTextChanged(Editable s) {
}
});
所以我在这里问是否有办法做到这一点.
So I'm here asking if there is a way to do that.
推荐答案
在afterTextChanged方法中编写条件并进行如下更改:
Write your conditions in afterTextChanged method and make changes as follows :
inputFieldA.requestFocus();
inputFieldA.addTextChangedListener(new TextWatcher() {
@Override
public void beforeTextChanged(CharSequence s, int start, int count, int after) {
}
@Override
public void onTextChanged(CharSequence s, int start, int before, int count) {
}
@Override
public void afterTextChanged(Editable s) {
if(inputFieldA.getText().toString().trim().length() == 4){
inputFieldB.requestFocus();
}
}
});
inputFieldB.addTextChangedListener(new TextWatcher() {
@Override
public void beforeTextChanged(CharSequence s, int start, int count, int after) {
}
@Override
public void onTextChanged(CharSequence s, int start, int before, int count) {
}
@Override
public void afterTextChanged(Editable s) {
if(inputFieldB.getText().toString().trim().length() == 4){
inputFieldC.requestFocus();
}
}
});
inputFieldC.addTextChangedListener(new TextWatcher() {
@Override
public void beforeTextChanged(CharSequence s, int start, int count, int after) {
}
@Override
public void onTextChanged(CharSequence s, int start, int before, int count) {
}
@Override
public void afterTextChanged(Editable s) {
if(inputFieldC.getText().toString().trim().length() == 4){
inputFieldD.requestFocus();
}
}
});
inputFieldD.addTextChangedListener(new TextWatcher() {
@Override
public void beforeTextChanged(CharSequence s, int start, int count, int after) {
}
@Override
public void onTextChanged(CharSequence s, int start, int before, int count) {
}
@Override
public void afterTextChanged(Editable s) {
if(inputFieldD.getText().toString().trim().length() == 4){
//send all to Main EditText (A + B + C + D)
}
}
});
这篇关于在EditText之间自动传递焦点的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！