问题描述
我将我的电容式液晶显示器连接到 tiny6410 并在其上安装 linux.我还将friendlyarm.ini 更改为:
I connect my Capacitive lcd to tiny6410 and install linux on it. I also change the friendlyarm.ini to this:
#This line cannot be removed. by FriendlyARM(www.arm9.net)
CheckOneButton=No
Action=Install
OS= Linux
LCD-Mode = No
LCD-Type = S70
LowFormat = No
VerifyNandWrite = No
CheckCRC32=No
StatusType = Beeper| LED
#################### Linux #####################
Linux-BootLoader = Superboot-6410.bin
Linux-Kernel = Linux/zImage
Linux-CommandLine = root=/dev/mtdblock2 rootfstype=yaffs2 init=/linuxrc console=ttySAC0,115200 skipcali=yes ctp=2
Linux-RootFs-InstallImage = Linux/rootfs_qtopia_qt4.img
Linux-RootFs-RunImage = Linux/rootfs_qtopia_qt4.ext3
并使用 ctp=1(不起作用)，ctp=2(不起作用)，ctp=3(不起作用)我的 lcd 是 S70(当安装 linux 时，它写在屏幕上的 lcd 类型是 S70(自动检测))
and play with ctp=1 (not work),ctp=2 (not work),ctp=3 (not work)my lcd is S70(when linux is install it writes on screen lcd type is S70(auto detect))
这个设备起初有电阻式液晶显示器，但它坏了然后我换了它到电容式液晶显示器但触摸不起作用.
this device has resistive lcd at first but it was broken then I changed itto capacitive lcd but touch not work .
推荐答案
我找到了答案.不要尝试，tiny6410 不支持电容式 LCD 触摸屏.(这是工厂回答)
I find the answer. Do not try, tiny6410 does not support capacitive LCD touch screen.(this is factory answer)
这篇关于tiny6410friendlyarm 连接到电容式液晶显示器，但触摸在 linux 中不起作用的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！