错误：calcChksum重新编译时类型不匹配

本文介绍了错误：calcChksum重新编译时类型不匹配的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！

问题描述

#include<stdio.h>
#include<conio.h>

int main(short argc, char** argv)
{

   unsigned char serNum [] = "DS0008D-0111A";
   unsigned char *ser = serNum;
   unsigned short checksum;
checksum = CalcChksum(*ser,13);
printf("the checksum is %x",checksum)  ;
return 0;
}


unsigned short CalcChksum(unsigned char *ptr,int bytecnt)
{
   int i;
   unsigned short chksum;

   chksum = 0;
   // Calculate 1's complement chksum
   for(i=0; i<bytecnt; i++)
   {
   chksum += (unsigned short)*ptr;
   chksum = (char)~chksum;
   }
   return(chksum);

}

推荐答案

unsigned char *ser = serNum;
checksum = CalcChksum(*ser,13);

不正确， CalcChksum 声明为;

Is incorrect, CalcChksum is declared like;

unsigned short CalcChksum(unsigned char *ptr, int bytecnt)

所以第一个参数应该是 char * ，通过在 ser 前面加上星号，你可以从 unsigned char * 中取消引用它到 unsigned char 。

将呼叫更改为

So the first parameter should be a char*, by putting as asterisk in front of ser you're de-referencing that from an unsigned char * to a unsigned char.
Change the call to

checksum = CalcChksum(ser,13);

希望这会有所帮助，

Fredrik

Hope this helps,
Fredrik

这篇关于错误：calcChksum重新编译时类型不匹配的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！

fredrik