问题描述
我需要配置无线网桥(类似于无线交换机).
i need to configure a wireless bridge (something like a wireless switch).
我有安装了OPENWRT的TP-LINK TL-WR740N v4.22和其他具有默认固件的TP-LINK路由器.我需要进行以下设置:
I have TP-LINK TL-WR740N v4.22 with OPENWRT installed and other TP-LINK router with default firmware. I need to do this setup:
路由器A(通过WAN端口连接到Internet)的IP:192.168.12.1，并且正在运行DHCP服务器
Router A (connected to the Internet via WAN port) have IP: 192.168.12.1 and is running DHCP Server
路由器B(OPENWRT)通过WiFi连接到ROUTER A-如何在此处配置接口?
Router B (OPENWRT) is connecting to ROUTER A via WiFi - how to configure interfaces here ?
PC A-通过有线连接到路由器B-应该从路由器的DHCP服务器获取IP.
PC A - Connected by wire to Router B - should obtain IP from Router's A DHCP server.
如何配置?
推荐答案
要实现此目的，您需要首先在路由器B上将LAN接口设置为静态.然后在LAN的物理设置中，将其在eth1和您的主服务器之间桥接WIFI.
To achieve this, you need to first set your LAN interface to static on Router B. Then in the physical settings for LAN, bridge it between eth1 and your master WIFI.
然后转到Network-> Wifi->扫描并加入路由器A作为客户端，并将网络分配给wwan.
Then head to Network-> Wifi-> Scan and Join Router A as a client and assign network to wwan.
最后创建一个AP并将其链接到lan接口. (网络-> Wifi->添加)
Finally create an AP and link it to the lan interface. (Network-> Wifi-> Add)
这篇关于Luci(Openwrt)wifi桥客户端-如何配置?的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！