如何发送命令APDU到HCE设备?

本文介绍了如何发送命令APDU到HCE设备?的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！

问题描述

我的应用程序的AID是F239856324897348，我已经为其构造了一个SelectAID APDU.现在，我如何实际将其发送到使用主机卡仿真的接收Android设备.

The AID of my app is F239856324897348 and I have constructed a SelectAID APDU for it. Now how do I actually send it to the receiving Android device which is using host card emulation.

我已经创建了我的HCE服务，以使用以下线程中的响应APDU进行响应:如何为以下项定义STORE DATA的APDU:主机卡仿真?

I have a created my HCE service to respond with a response APDU as in this thread: How to define an APDU for STORE DATA for Host Card Emulation?

public static byte[] SelectAID = new byte[]{
        (byte) 0xF2, (byte) 0x39, (byte) 0x85, (byte) 0x63,
        (byte) 0x24, (byte) 0x89, (byte) 0x73, (byte) 0x48};

private void commandAPDU(byte[] apdu){
   //where do I go from here...
}

commandAPDU(SelectAID);

推荐答案

APDU的格式在ISO/IEC 7816-4中定义.一个典型的SELECT(通过AID)命令如下所示:

The format of APDUs is defined in ISO/IEC 7816-4. A typical SELECT (by AID) command looks like this:


+-----+-----+-----+-----+-----+-------------------------+-----+
| CLA | INS | P1  | P2  | Lc  | DATA                    | Le  |
+-----+-----+-----+-----+-----+-------------------------+-----+
| 00  | A4  | 04  | 00  | XX  | AID                     | 00  |
+-----+-----+-----+-----+-----+-------------------------+-----+

您可以这样创建它:

private byte[] selectApdu(byte[] aid) {
    byte[] commandApdu = new byte[6 + aid.length];
    commandApdu[0] = (byte)0x00;  // CLA
    commandApdu[1] = (byte)0xA4;  // INS
    commandApdu[2] = (byte)0x04;  // P1
    commandApdu[3] = (byte)0x00;  // P2
    commandApdu[4] = (byte)(aid.length & 0x0FF);       // Lc
    System.arraycopy(aid, 0, commandApdu, 5, aid.length);
    commandApdu[commandApdu.length - 1] = (byte)0x00;  // Le
    return commandApdu;
}

然后您可以将这样的APDU命令发送到通过阅读器模式API找到的标签/HCE设备:

You could then send such APDU commands to a tag/HCE device discovered through the reader-mode API:

public abstract void onTagDiscovered(Tag tag) {
    IsoDep isoDep = IsoDep.get(tag);
    if (isoDep != null) {
        try {
            isoDep.connect();
            byte[] result = isoDep.transceive(selectApdu(SelectAID));
        } except (IOException ex) {
        } finally {
            try {
                isoDep.close();
            } except (Exception ignored) {}
        }
    }
}