问题描述
我试图建立的所有功能于一身的ffmpeg静态二进制NDK R7B，一切工作正常，直到我尝试使用RTMP支持建立它。
I'm trying to build all-in-one static binary of FFMPEG with NDK r7b and everything works fine untill i try to build it with RTMP support.
我是https://github.com/guardianproject/android-ffmpeg与librtmp2.4和自定义的配置是这样
I'm usind sources from https://github.com/guardianproject/android-ffmpeg with librtmp2.4 and custom config like this
.configure \
--target-os=linux \
--cross-prefix=arm-linux-androideabi- \
--arch=arm \
--sysroot=/home/andrey/android-ndk-r7b/platforms/android-3/arch-arm \
--enable-static \
--disable-shared \
--disable-symver \
--enable-small \
--disable-devices \
--disable-avdevice \
--enable-gpl \
--enable-librtmp \
--prefix=../build/ffmpeg/armeabi \
--extra-cflags=-I../rtmpdump/librtmp \
--extra-ldflags=-L../rtmpdump/librtmp \
和rtmpdump目录规定在相同的水平的ffmpeg。据我了解在我的配置最后两个字符串表示，在这里编译器可能会发现librtmp来源。但我得到的是错误：librtmp找不到
and rtmpdump directory lays on the same level as ffmpeg.As i understand last two strings in my config says where compiler may find sources of librtmp.But all i get is ERROR: librtmp not found
我不expereienced与NDK和obviosly我丢失了一些重要的组成部分，但我找不到它由我自己。
I'm not expereienced with NDK and obviosly i missing some important part but i can't find it by myself.
推荐答案
这是具有挑战性的，但我想我有一个解决办法。在配置时的问题是，FFmpeg的希望通过pkg-配置管理系统，以检测适当librtmp安装。
This is challenging, but I think I have a solution. The problem at configure-time is that FFmpeg wants to detect a proper librtmp installation via the pkg-config management system.
我假设你已经成功地交叉编译通过../rtmpdump引用的目录librtmp。编辑FFmpeg的配置脚本，并搜索行：
I'm assuming your have successfully cross-compiled librtmp in the directory referenced by ../rtmpdump. Edit the FFmpeg configure script and search for the line:
enabled librtmp && require_pkg_config librtmp librtmp/rtmp.h RTMP_Socket
评论了这一点（把＃在该行的前面）。现在，重新运行配置，只有具备了这些修改：
Comment that out (put a '#' at the front of the line). Now, re-run configure, only with these modifications:
--extra-cflags="-I/full/path/to/rtmpdump"
这可能有助于在这里有一个绝对路径。此外，省略/ librtmp /时，因为#include指令已经preFIX与librtmp /头文件的末尾。下一页：
It may help to have an absolute path here. Also, omit /librtmp/ at the end since the #include directives already prefix the header files with librtmp/. Next:
--extra-ldflags="-L/full/path/to/rtmpdump -lrtmp"
再次绝对路径，并指定库对，因为我们注释掉的逻辑，通过配置链接。
Again, absolute path, and specify the library to link against since we commented out that logic via configure.
现在，配置应该会成功的交叉编译也应该是快乐的。最后的ffmpeg的二进制文件应在协议报告的RTMP模块系列：
Now, configure should succeed and the cross-compilation should also be happy. The final ffmpeg binary should report the family of RTMP modules under protocols:
ffmpeg -protocols
[...]
rtmp
rtmpe
rtmps
rtmpt
rtmpte
请注意，我没有一个NDK开发环境来测试这上。但我通过编译librtmp（不包正在通过pkg配置安装），然后执行上述步骤测试了我的桌面的Ubuntu系统。
Note that I don't have an NDK dev environment to test this on. But I tested on my desktop Ubuntu system by compiling librtmp (without the package being installed via pkg-config) and then performing the above steps.
这篇关于建筑FFMPEG与librtmp为Android的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！