将注意力层添加到 Seq2Seq 模型

问题描述

我已经构建了一个编码器-解码器的 Seq2Seq 模型.我想给它添加一个注意力层.我尝试添加注意层通过这个 但它没有帮助.

I have build a Seq2Seq model of encoder-decoder. I want to add an attention layer to it. I tried adding attention layer through this but it didn't help.

这是我没有注意的初始代码

Here is my initial code without attention

# Encoder
encoder_inputs = Input(shape=(None,))
enc_emb =  Embedding(num_encoder_tokens, latent_dim, mask_zero = True)(encoder_inputs)
encoder_lstm = LSTM(latent_dim, return_state=True)
encoder_outputs, state_h, state_c = encoder_lstm(enc_emb)
# We discard `encoder_outputs` and only keep the states.
encoder_states = [state_h, state_c]

# Set up the decoder, using `encoder_states` as initial state.
decoder_inputs = Input(shape=(None,))
dec_emb_layer = Embedding(num_decoder_tokens, latent_dim, mask_zero = True)
dec_emb = dec_emb_layer(decoder_inputs)
# We set up our decoder to return full output sequences,
# and to return internal states as well. We don't use the
# return states in the training model, but we will use them in inference.
decoder_lstm = LSTM(latent_dim, return_sequences=True, return_state=True)
decoder_outputs, _, _ = decoder_lstm(dec_emb,
                                     initial_state=encoder_states)
decoder_dense = Dense(num_decoder_tokens, activation='softmax')
decoder_outputs = decoder_dense(decoder_outputs)

# Define the model that will turn
# `encoder_input_data` & `decoder_input_data` into `decoder_target_data`
model = Model([encoder_inputs, decoder_inputs], decoder_outputs)
model.summary()

这是我在解码器中添加注意力层后的代码(编码器层与初始代码中的相同)

And this is the code after I added attention layer in decoder (the encoder layer is same as in initial code)

# Set up the decoder, using `encoder_states` as initial state.
decoder_inputs = Input(shape=(None,))
dec_emb_layer = Embedding(num_decoder_tokens, latent_dim, mask_zero = True)
dec_emb = dec_emb_layer(decoder_inputs)
# We set up our decoder to return full output sequences,
# and to return internal states as well. We don't use the
# return states in the training model, but we will use them in inference.
decoder_lstm = LSTM(latent_dim, return_sequences=True, return_state=True)
attention = dot([decoder_lstm, encoder_lstm], axes=[2, 2])
attention = Activation('softmax')(attention)
context = dot([attention, encoder_lstm], axes=[2,1])
decoder_combined_context = concatenate([context, decoder_lstm])
decoder_outputs, _, _ = decoder_combined_context(dec_emb,
                                     initial_state=encoder_states)
decoder_dense = Dense(num_decoder_tokens, activation='softmax')
decoder_outputs = decoder_dense(decoder_outputs)

# Define the model that will turn
# `encoder_input_data` & `decoder_input_data` into `decoder_target_data`
model = Model([encoder_inputs, decoder_inputs], decoder_outputs)
model.summary()

在执行此操作时，我遇到了错误

While doing this, I got an error

 Layer dot_1 was called with an input that isn't a symbolic tensor. Received type: <class 'keras.layers.recurrent.LSTM'>. Full input: [<keras.layers.recurrent.LSTM object at 0x7f8f77e2f3c8>, <keras.layers.recurrent.LSTM object at 0x7f8f770beb70>]. All inputs to the layer should be tensors.

有人可以帮忙在这个架构中安装一个注意力层吗?

Can someone please help in fitting an attention layer in this architecture?

推荐答案

点积需要在张量输出上计算..., state_c =decoder_lstm(enc_emb, initial_state=encoder_states)

the dot products need to be computed on tensor outputs... in encoder you correctly define the encoder_output, in decoder you have to add decoder_outputs, state_h, state_c = decoder_lstm(enc_emb, initial_state=encoder_states)

现在的点积是

attention = dot([decoder_outputs, encoder_outputs], axes=[2, 2])
attention = Activation('softmax')(attention)
context = dot([attention, encoder_outputs], axes=[2,1])

串联不需要initial_states.你必须在你的 rnn 层定义它:decoder_outputs, state_h, state_c =decoder_lstm(enc_emb, initial_state=encoder_states)

the concatenation doesn't need initial_states. you have to define it in your rnn layer: decoder_outputs, state_h, state_c = decoder_lstm(enc_emb, initial_state=encoder_states)

这里是完整的例子

编码器+解码器

# dummy variables
num_encoder_tokens = 30
num_decoder_tokens = 10
latent_dim = 100

encoder_inputs = Input(shape=(None,))
enc_emb =  Embedding(num_encoder_tokens, latent_dim, mask_zero = True)(encoder_inputs)
encoder_lstm = LSTM(latent_dim, return_sequences=True, return_state=True)
encoder_outputs, state_h, state_c = encoder_lstm(enc_emb)
# We discard `encoder_outputs` and only keep the states.
encoder_states = [state_h, state_c]

# Set up the decoder, using `encoder_states` as initial state.
decoder_inputs = Input(shape=(None,))
dec_emb_layer = Embedding(num_decoder_tokens, latent_dim, mask_zero = True)
dec_emb = dec_emb_layer(decoder_inputs)
# We set up our decoder to return full output sequences,
# and to return internal states as well. We don't use the
# return states in the training model, but we will use them in inference.
decoder_lstm = LSTM(latent_dim, return_sequences=True, return_state=True)
decoder_outputs, _, _ = decoder_lstm(dec_emb,
                                     initial_state=encoder_states)
decoder_dense = Dense(num_decoder_tokens, activation='softmax')
decoder_outputs = decoder_dense(decoder_outputs)

# Define the model that will turn
# `encoder_input_data` & `decoder_input_data` into `decoder_target_data`
model = Model([encoder_inputs, decoder_inputs], decoder_outputs)
model.summary()

注意解码器

# Set up the decoder, using `encoder_states` as initial state.
decoder_inputs = Input(shape=(None,))
dec_emb_layer = Embedding(num_decoder_tokens, latent_dim, mask_zero = True)
dec_emb = dec_emb_layer(decoder_inputs)
# We set up our decoder to return full output sequences,
# and to return internal states as well. We don't use the
# return states in the training model, but we will use them in inference.
decoder_lstm = LSTM(latent_dim, return_sequences=True, return_state=True)
decoder_outputs, state_h, state_c = decoder_lstm(dec_emb, initial_state=encoder_states)
attention = dot([decoder_outputs, encoder_outputs], axes=[2, 2])
attention = Activation('softmax')(attention)
context = dot([attention, encoder_outputs], axes=[2,1])
decoder_outputs = concatenate([context, decoder_outputs])
decoder_dense = Dense(num_decoder_tokens, activation='softmax')(decoder_outputs)

# Define the model that will turn
# `encoder_input_data` & `decoder_input_data` into `decoder_target_data`
model = Model([encoder_inputs, decoder_inputs], decoder_dense)
model.summary()

这篇关于将注意力层添加到 Seq2Seq 模型的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！