本文介绍了将 GCC 汇编代码转换为 armasm 汇编代码的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！
问题描述
我正在尝试将 GCC 汇编代码转换为 ARMASM 汇编代码，任何人都可以帮我解决这个问题.主要问题是 .req .unreq .qn.dn .我想知道上述指令的等价物.我试过 ALIAS 没用.
I am trying to convert GCC assembly code to ARMASM assembly code can anyone please help me with this. The main problem is .req .unreq .qn.dn . I wanted to know the equivalents of the above directives. I tried ALIAS it did not work.
.align 4
.global ne10_fir_float_neon
.extern ne10_qMaskTable32
.thumb
.thumb_func
ne10_fir_float_neon:
PUSH {r4-r12,lr} @push r12:
to keep stack 8 bytes aligned
@/*ARM Registers*/
pStateStruct .req R0
pSrc .req R1
pDst .req R2
blockSize .req R3
pState .req R4 @/* State pointer */
pCoeffs .req R5 @/* Coefficient pointer */
pStateCurnt .req R6 @/* Points to the current sample of the state */
pX .req R7 @/* Temporary pointers for state buffer */
pB .req R8 @/* Temporary pointers for coefficient buffer */
numTaps .req R9 @/* Length of the filter */
tapCnt .req R10 @ /* Loop counter */
Count .req R11 @ /* Loop counter */
pTemp .req R11
pMask .req R14 @ /* Mask Table */
mask .req R12
@/*NEON variale Declaration*/
qInp .qn Q0.F32
dInp_0 .dn D0.F32
dInp_1 .dn D1.F32
qCoeff .qn Q1.F32
dCoeff_0 .dn D2.F32
dCoeff_1 .dn D3.F32
qZero .qn Q2.F32
qMask .qn Q3.U32
dMask_0 .dn D6.U32
dMask_1 .dn D7.U32
dOut_0 .dn D6.F32
dOut_1 .dn D7.F32
qAcc0 .qn Q8.F32
dAcc0_0 .dn D16.F32
dAcc0_1 .dn D17.F32
qTemp .qn Q9.F32
dTemp_0 .dn D18.F32
dTemp_1 .dn D19.F32
qTemp1 .qn Q10.F32
dTemp1_0 .dn D20.F32
dTemp1_1 .dn D21.F32
qTemp2 .qn Q11.F32
qTemp3 .qn Q12.F32
qMask1 .qn Q13.U32
dMask1_0 .dn D26.U32
dMask1_1 .dn D27.U32
qMaskTmp .qn Q14.U32
dMaskTmp_0 .dn D28.U32
dMaskTmp_1 .dn D29.U32
qAcc1 .qn Q3.F32
qAcc2 .qn Q13.F32
qAcc3 .qn Q15.F32
LDRH numTaps,[pStateStruct],#4
LDR pState,[pStateStruct],#4
LDR pCoeffs,[pStateStruct],#4
@/* S->state buffer contains previous frame (numTaps - 1) samples */
@/* pStateCurnt points to the location where the new input data should be written */
@/*pStateCurnt = &(S->state[(numTaps - 1u)])@*/
SUB mask,numTaps,#1
LDR pMask,=ne10_qMaskTable32
AND tapCnt,numTaps,#3
ADD pStateCurnt,pState,mask,LSL #2
AND mask,blockSize,#3
@/* Apply loop unrolling and compute 4 output values simultaneously.
@* The variables acc0 ... acc3 hold output values that are being computed:
@*
@* acc0 = b[numTaps-1] * x[n-numTaps-1] + b[numTaps-2] * x[n-numTaps-2] + b[numTaps-3] * x[n-numTaps-3] +...+ b[0] * x[0]
@* acc1 = b[numTaps-1] * x[n-numTaps] + b[numTaps-2] * x[n-numTaps-1] + b[numTaps-3] * x[n-numTaps-2] +...+ b[0] * x[1]
@* acc2 = b[numTaps-1] * x[n-numTaps+1] + b[numTaps-2] * x[n-numTaps] + b[numTaps-3] * x[n-numTaps-1] +...+ b[0] * x[2]
@* acc3 = b[numTaps-1] * x[n-numTaps+2] + b[numTaps-2] * x[n-numTaps+1] + b[numTaps-3] * x[n-numTaps] +...+ b[0] * x[3]
@*/
@/*If numTaps,blockSize are not multiples of 4, Get the appropriate Masks*/
ADD pTemp,pMask,tapCnt,LSL #4
VEOR qZero,qZero
ADD pX,pMask,mask,LSL #4
VLD1 {dMaskTmp_0,dMaskTmp_1},[pTemp]
VLD1 {dMask1_0,dMask1_1},[pX]
@/* Copy blockCnt number of new input samples into the state buffer */
SUBS blockSize,#4
BLT firEndOuterLoop
@/* Compute 4 outputs at a time*/
firOuterLoop:
VLD1 {dTemp_0,dTemp_1},[pSrc]!
MOV pX,pState
MOV pB,pCoeffs
@/* Read the first four samples from the state buffer:
@* x[n-numTaps], x[n-numTaps-1], x[n-numTaps-2],x[n-numTaps-3] */
VST1 {dTemp_0,dTemp_1},[pStateCurnt]!
@/* Zero the Accumulators*/
VEOR qAcc0,qAcc0
VLD1 {dInp_0,dInp_1},[pX]!
@//* Read the first four coefficients b[numTaps] to b[numTaps-3] */
VLD1 {dCoeff_0,dCoeff_1},[pB]!
@/* Loop unrolling. Process 4 taps at a time. */
SUBS tapCnt,numTaps,#4
VLD1 {dTemp_0,dTemp_1},[pX]!
BLT firEndInnerLoop
firInnerLoop:
VEXT qTemp1,qInp,qTemp,#1
@/* acc0 += b[numTaps] * x[n-numTaps-1]+ b[numTaps] * x[n-numTaps-2] +
@* b[numTaps] * x[n-numTaps-3] + b[numTaps] * x[n-numTaps-4]*/
VMLA qAcc0,qInp,dCoeff_0[0]
@/* acc1 += b[numTaps-1] * x[n-numTaps-2]+ b[numTaps-1] * x[n-numTaps-3] +
@b[numTaps-1] * x[n-numTaps-4] +*b[numTaps-1] * x[n-numTaps-5]*/
VMUL qAcc1,qTemp1,dCoeff_0[1]
VEXT qTemp2,qInp,qTemp,#2
@/* acc2 += b[numTaps-2] * x[n-numTaps-3]+ b[numTaps-2] * x[n-numTaps-4] +
@b[numTaps-2] * x[n-numTaps-5] + *b[numTaps-2] * x[n-numTaps-6]*/
VMUL qAcc2,qTemp2,dCoeff_1[0]
VADD qAcc0, qAcc0, qAcc1
VEXT qTemp3,qInp,qTemp,#3
@/* acc3 += b[numTaps-3] * x[n-numTaps-4]+ b[numTaps-3] * x[n-numTaps-5] +
@b[numTaps-3] * x[n-numTaps-6] +*b[numTaps-3] * x[n-numTaps-7] */
VMUL qAcc3,qTemp3,dCoeff_1[1]
VADD qAcc0, qAcc0, qAcc2
VMOV qInp,qTemp
VLD1 {dTemp_0,dTemp_1},[pX]!
VADD qAcc0, qAcc0, qAcc3
SUBS tapCnt,#4
@/* Read the b[numTaps-4] to b[numTaps-7] coefficients */
VLD1 {dCoeff_0,dCoeff_1},[pB]!
BGE firInnerLoop
firEndInnerLoop:
ADDS tapCnt, tapCnt, #4
BEQ firStoreOutput
@/* If the filter length is not a multiple of 4, compute the remaining filter taps */
@/*Select only the remaining filter Taps*/
VMOV qMask,qMaskTmp
VBSL qMask,qCoeff,qZero
VEXT qTemp1,qInp,qTemp,#1
VMLA qAcc0,qInp,dOut_0[0]
VEXT qTemp2,qInp,qTemp,#2
VMLA qAcc0,qTemp1,dOut_0[1]
VMLA qAcc0,qTemp2,dOut_1[0]
firStoreOutput:
@/* Advance the state pointer by 4 to process the next group of 4 samples */
ADD pState,#16
@/* The results in the 4 accumulators are in 2.30 format. Convert to 1.31
@ * Then store the 4 outputs in the destination buffer. */
SUBS blockSize,#4
VST1 {dAcc0_0,dAcc0_1},[pDst]!
BGE firOuterLoop
firEndOuterLoop:
@/*Handle BlockSize Not a Multiple of 4*/
ADDS blockSize,#4
BEQ firCopyData
@/*Copy the Remaining BlockSize Number of Input Sample to state Buffer*/
VMOV qMask,qMask1
VLD1 {dTemp1_0,dTemp1_1},[pStateCurnt]
VLD1 {dTemp_0,dTemp_1},[pSrc]
ADD pSrc,pSrc,blockSize,LSL #2
MOV pX,pState
MOV pB,pCoeffs
VBSL qMask,qTemp,qTemp1
VST1 {dMask_0,dMask_1},[pStateCurnt]
VLD1 {dInp_0,dInp_1},[pX]!
ADD pStateCurnt,pStateCurnt,blockSize, LSL #2
@/* Zero the Accumulators*/
VEOR qAcc0,qAcc0
VLD1 {dCoeff_0,dCoeff_1},[pB]!
SUBS tapCnt,numTaps,#4
VLD1 {dTemp_0,dTemp_1},[pX]!
BLT firEndInnerLoop1
firInnerLoop1:
VEXT qTemp1,qInp,qTemp,#1
VMLA qAcc0,qInp,dCoeff_0[0]
VEXT qTemp2,qInp,qTemp,#2
VMLA qAcc0,qTemp1,dCoeff_0[1]
VEXT qTemp3,qInp,qTemp,#3
VMLA qAcc0,qTemp2,dCoeff_1[0]
VMOV qInp,qTemp
VMLA qAcc0,qTemp3,dCoeff_1[1]
VLD1 {dCoeff_0,dCoeff_1},[pB]!
SUBS tapCnt,#4
VLD1 {dTemp_0,dTemp_1},[pX]!
BGE firInnerLoop1
firEndInnerLoop1:
VMOV qMask,qMaskTmp
VBSL qMask,qCoeff,qZero
VEXT qTemp1,qInp,qTemp,#1
VMLA qAcc0,qInp,dOut_0[0]
VEXT qTemp2,qInp,qTemp,#2
VMLA qAcc0,qTemp1,dOut_0[1]
VMLA qAcc0,qTemp2,dOut_1[0]
VMOV qMask,qMask1
VLD1 {dTemp_0,dTemp_1},[pDst]
@/* If the blockSize is not a multiple of 4, Mask the unwanted Output */
VBSL qMask,qAcc0,qTemp
VST1 {dMask_0,dMask_1},[pDst]
ADD pDst,pDst,blockSize,LSL #2
ADD pState,pState,blockSize,LSL #2
firCopyData:
@/* Processing is complete. Now shift the data in the state buffer down by
@** blockSize samples. This prepares the state buffer for the next function
@** call. */
@/* Points to the start of the state buffer */
SUB numTaps,numTaps,#1
AND mask,numTaps,#3
LDR pStateCurnt,[pStateStruct,#-8]
ADD pTemp,pMask,mask,LSL #4
VLD1 {dInp_0,dInp_1},[pState]!
VLD1 {dMask_0,dMask_1},[pTemp]
@/* copy data */
SUBS Count,numTaps,#4
BLT firEnd
firCopyLoop:
VST1 {dInp_0,dInp_1},[pStateCurnt]!
SUBS Count,#4
VLD1 {dInp_0,dInp_1},[pState]!
BGE firCopyLoop
firEnd:
VLD1 {dTemp_0,dTemp_1},[pStateCurnt]
VBSL qMask,qInp,qTemp
VST1 {dOut_0,dOut_1},[pStateCurnt]
ADD pStateCurnt,pStateCurnt,mask, LSL #2
@/*Return From Function*/
POP {r4-r12,pc}
@/*ARM Registers*/
.unreq pStateStruct
.unreq pSrc
.unreq pDst
.unreq blockSize
.unreq pState
.unreq pCoeffs
.unreq pStateCurnt
.unreq pX
.unreq pB
.unreq numTaps
.unreq tapCnt
.unreq Count
.unreq pTemp
.unreq pMask
.unreq mask
@/*NEON variale Declaration*/
.unreq qInp
.unreq dInp_0
.unreq dInp_1
.unreq qCoeff
.unreq dCoeff_0
.unreq dCoeff_1
.unreq qZero
.unreq qMask
.unreq dMask_0
.unreq dMask_1
.unreq dOut_0
.unreq dOut_1
.unreq qAcc0
.unreq dAcc0_0
.unreq dAcc0_1
.unreq qTemp
.unreq dTemp_0
.unreq dTemp_1
.unreq qTemp1
.unreq dTemp1_0
.unreq dTemp1_1
.unreq qTemp2
.unreq qTemp3
.unreq qMask1
.unreq dMask1_0
.unreq dMask1_1
.unreq qMaskTmp
.unreq dMaskTmp_0
.unreq dMaskTmp_1
.unreq qAcc1
.unreq qAcc2
.unreq qAcc3
.end
推荐答案
知道了 .req 与 RN 相同，并做了一些调整并删除了 unnesaary 指令让它工作了！！
Got it .req is same as RN and made some adjustments and removed unnesaary directives got it working!!
这篇关于将 GCC 汇编代码转换为 armasm 汇编代码的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！