问题描述
我在使用Jenkins + Gerrit时遇到了麻烦。
以下是我到目前为止的内容： Jenkins中的Gerrit触发器配置似乎没问题：当我推送一个新的变更集时，Jenkins构建版本启动。
现在您会注意到有一个按钮高级，点击它可以显示如下的额外字段：
现在你可以在这里输入你的refspec：$ GERRIT_REFSPEC
现在是eit她重新触发失败的构建或放弃审查并提交一个新的应用程序。
下面是Jenkins作业的输出，现在我们有相应的refspec：
Gerrit用户kerrien重新发布：https：//bbpcode.epfl.ch/code/15056
[EnvInject ] - 加载节点环境变量。
在工作空间/var/tmp/jenkins/workspace/datamining.nip-commons.gerrit中的rh6.6-02上进行远程构建（amd64-RedHatEnterpriseServer 6.6 RedHatEnterpriseServer amd64-RedHatEnterpriseServer-6.6 rh6.x RedHatEnterpriseServer-6.6 amd64）
> / usr / bin / git rev-parse --is-inside-work-tree＃timeout = 10
从远程Git存储库获取更改
> / usr / bin / git config remote.origin.url ssh：//bbpcode.epfl.ch/datamining/nip-commons＃timeout = 10
从ssh获取上游更改：//bbpcode.epfl.ch/datamining / nip-commons
> / usr / bin / git --version＃timeout = 10
> / usr / bin / git fetch --tags --progress ssh：//bbpcode.epfl.ch/datamining/nip-commons refs / changes / 56/15056/2
> / usr / bin / git rev-parse 74e4ff18f54bd6e046f7af016614193f566adfe4 ^ {commit}＃timeout = 10
检出版本74e4ff18f54bd6e046f7af016614193f566adfe4（dev）
> / usr / bin / git config core.sparsecheckout＃timeout = 10
> / usr / bin / git checkout -f 74e4ff18f54bd6e046f7af016614193f566adfe4
> / usr / bin / git rev-parse FETCH_HEAD ^ {commit}＃timeout = 10
> / usr / bin / git rev-list 2649d51369413cef4dfb7ec50939945005514cfa＃timeout = 10
清理工作区
> / usr / bin / git rev-parse --verify HEAD＃timeout = 10
重置工作树
> / usr / bin / git reset --hard＃timeout = 10
> / usr / bin / git clean -fdx＃timeout = 10
触发datamining.nip-commons.gerrit»默认
datamining.nip-commons.gerrit»默认结果为SUCCESS
开始计算构建的磁盘使用情况
已完成计算2秒内构建的磁盘使用情况
开始计算工作空间的磁盘使用情况
完成在0秒内计算工作空间的磁盘使用情况
完成：SUCCESS
I have trouble using Jenkins+Gerrit.
Here is what I got so far:
Gerrit Trigger configuration in Jenkins seems to be ok: When I push a new changeset, Jenkins build is launched.
I used this:Jenkins: settings for Gerrit Trigger problemsto also be able to launch it "manually".
As for my configuration, I havesomething like this: https://stackoverflow.com/a/18347982/2248987. Branch Specifier is $GERRIT_BRANCH and Ref Spec is $GERRIT_REFSPEC
Gerrit and Git are working fines on their own. Access seems OK too.
Here is my issue. When building (gerrit triggered or manually), log output is:
> git rev-parse --is-inside-work-tree # timeout=10
Fetching changes from the remote Git repository
> git config remote.origin.url ssh://user@host:29418/testproject # timeout=10
Fetching upstream changes from ssh://user@host:29418/testproject
> git --version # timeout=10
using GIT_SSH to set credentials
> git -c core.askpass=true fetch --tags --progress ssh://user@host:29418/testproject refs/heads/master
> git rev-parse origin/$GERRIT_BRANCH^{commit} # timeout=10
> git rev-parse $GERRIT_BRANCH^{commit} # timeout=10
ERROR: Couldn't find any revision to build. Verify the repository and branch configuration for this job.
Finished: FAILURE
I am stuck with this message, tried with empty repo, non-empty ones, and also with or without changeset "in review"
I used to have this problem and I think I have now fixed it, I am blaming the Jenkins UI for hiding some essential configuration elements ;)
Here is the output of my Jenkins build prior to the fix:
Triggered by Gerrit: https://bbpcode.epfl.ch/code/15056
[EnvInject] - Loading node environment variables.
Building remotely on rh6.6-02 (amd64-RedHatEnterpriseServer 6.6 RedHatEnterpriseServer amd64-RedHatEnterpriseServer-6.6 rh6.x RedHatEnterpriseServer-6.6 amd64) in workspace /var/tmp/jenkins/workspace/datamining.nip-commons.gerrit
> /usr/bin/git rev-parse --is-inside-work-tree # timeout=10
Fetching changes from the remote Git repository
> /usr/bin/git config remote.origin.url ssh://bbpcode.epfl.ch/datamining/nip-commons # timeout=10
Fetching upstream changes from ssh://bbpcode.epfl.ch/datamining/nip-commons
> /usr/bin/git --version # timeout=10
> /usr/bin/git fetch --tags --progress ssh://bbpcode.epfl.ch/datamining/nip-commons +refs/heads/*:refs/remotes/origin/*
> /usr/bin/git rev-parse 74e4ff18f54bd6e046f7af016614193f566adfe4^{commit} # timeout=10
ERROR: Couldn't find any revision to build. Verify the repository and branch configuration for this job.
Started calculate disk usage of build
Finished Calculation of disk usage of build in 0 seconds
Started calculate disk usage of workspace
Finished Calculation of disk usage of workspace in 0 seconds
Finished: FAILURE
SOLUTION
You will need to open your build configuration and go to the section 'Source Code Management' as shown below:
Now you will notice that there is a button 'Advanced', click it to reveal the extra fields as below:
Now you can type your refspec here: $GERRIT_REFSPEC
Now either retrigger a failed build or abandon reviews and submit a new one and it should be working.
Here is the output of the Jenkins job now that we have the appropriate refspec:
Retriggered by user kerrien for Gerrit: https://bbpcode.epfl.ch/code/15056
[EnvInject] - Loading node environment variables.
Building remotely on rh6.6-02 (amd64-RedHatEnterpriseServer 6.6 RedHatEnterpriseServer amd64-RedHatEnterpriseServer-6.6 rh6.x RedHatEnterpriseServer-6.6 amd64) in workspace /var/tmp/jenkins/workspace/datamining.nip-commons.gerrit
> /usr/bin/git rev-parse --is-inside-work-tree # timeout=10
Fetching changes from the remote Git repository
> /usr/bin/git config remote.origin.url ssh://bbpcode.epfl.ch/datamining/nip-commons # timeout=10
Fetching upstream changes from ssh://bbpcode.epfl.ch/datamining/nip-commons
> /usr/bin/git --version # timeout=10
> /usr/bin/git fetch --tags --progress ssh://bbpcode.epfl.ch/datamining/nip-commons refs/changes/56/15056/2
> /usr/bin/git rev-parse 74e4ff18f54bd6e046f7af016614193f566adfe4^{commit} # timeout=10
Checking out Revision 74e4ff18f54bd6e046f7af016614193f566adfe4 (dev)
> /usr/bin/git config core.sparsecheckout # timeout=10
> /usr/bin/git checkout -f 74e4ff18f54bd6e046f7af016614193f566adfe4
> /usr/bin/git rev-parse FETCH_HEAD^{commit} # timeout=10
> /usr/bin/git rev-list 2649d51369413cef4dfb7ec50939945005514cfa # timeout=10
Cleaning workspace
> /usr/bin/git rev-parse --verify HEAD # timeout=10
Resetting working tree
> /usr/bin/git reset --hard # timeout=10
> /usr/bin/git clean -fdx # timeout=10
Triggering datamining.nip-commons.gerrit » default
datamining.nip-commons.gerrit » default completed with result SUCCESS
Started calculate disk usage of build
Finished Calculation of disk usage of build in 2 second
Started calculate disk usage of workspace
Finished Calculation of disk usage of workspace in 0 seconds
Finished: SUCCESS
这篇关于杰金斯的Gerrit触发器找不到任何修订版本的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！