为 Pandaboard 交叉编译 Qt

本文介绍了为 Pandaboard 交叉编译 Qt的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！

问题描述

我花了数周时间尝试为我的 Panda 板交叉编译 Qt，但没办法，我无法通过 ./configure.如果有人能给我帮助，我将不胜感激.

I spend weeks trying to cross compile Qt for my Panda board and no way, I can't pass the ./configure. If someone could give me a help I'll appreciate.

我的主机系统是 Ubuntu-13.04 ×86_64bit(在 Virtualbox 上运行)

My host system is Ubuntu-13.04 ×86_64bit(running un Virtualbox)

我的目标系统是 Pandaboard ES Ubuntu-12.04.

My target system is Pandaboard ES Ubuntu-12.04.

主机箱中的所有步骤:

sudo apt-get install arm-linux-gnueabihf

sudo mkdir /opt/qt-485-armhf

cd /usr/src

sudo wget http://download.qt-project.org/official_releases/qt/4.8/4.8.5/qt-everywhere-opensource-src-4.8.5.tar.gz

sudo tar xf qt-everywhere-opensource-src-4.8.5.tar.gz

cd /usr/src/qt-everywhere-opensource-src-4.8.5

sudo cp -r mkspecs/qws/linux-arm-gnueabi-g++ mkspecs/qws/linux-arm-gnueabihf-g++

sudo vim mkspecs/qws/linux-arm-gnueabihf-g++/qmake.conf
-------------------------------
include(../../common/gcc-base-unix.conf)
include(../../common/g++-unix.conf)
include(../../common/linux.conf)
include(../../common/qws.conf)

#Compiler Flags to take advantage of the ARM architecture
#N.B.:I also tried to uncomment the two following instructions with no success
QMAKE_CFLAGS = -march=armv7-a -mtune=cortex-a9 -mfpu=neon -mfloat-abi=hard
QMAKE_CXXFLAGS = -march=armv7-a -mtune=cortex-a9 -mfpu=neon -mfloat-abi=hard

# modifications to g++.conf
QMAKE_CC                = arm-linux-gnueabihf-gcc
QMAKE_CXX               = arm-linux-gnueabihf-g++
QMAKE_LINK              = arm-linux-gnueabihf-g++
QMAKE_LINK_SHLIB        = arm-linux-gnueabihf-g++

# modifications to linux.conf
QMAKE_AR                = arm-linux-gnueabihf-ar cqs
QMAKE_OBJCOPY           = arm-linux-gnueabihf-objcopy
QMAKE_STRIP             = arm-linux-gnueabihf-strip

load(qt_config)
---------------------------------

sudo sed -i -e "/#if/d" -e "/#error/d" -e "/#endif/d" config.tests/unix/libmng/libmng.cpp (This command fixes detection of libmng 2.0.)
export QTDIR=/opt/qt4-485-armhf
And finally:
sudo ./configure -prefix /opt/qt4-485-armhf -sysconfdir /etc/xdg -embedded arm -little-endian -host-big-endian -no-qt3support -nomake examples -nomake demos -opensource -confirm-license -release -openssl-linked -no-phonon -no-phonon-backend -no-nis -platform qws/linux-x86_64-g++ -xplatform qws/linux-arm-gnueabihf-g++ -optimized-qmake

With this result:
Creating qmake. Please wait...
g++ -c -o option.o -pipe -m64 -DQMAKE_OPENSOURCE_EDITION -O2 -g -I. -Igenerators -Igenerators/unix -Igenerators/win32 -Igenerators/mac -Igenerators/symbian -Igenerators/integrity -I/usr/src/qt-everywhere-opensource-src-4.8.5/include -I/usr/src/qt-everywhere-opensource-src-4.8.5/include/QtCore -I/usr/src/qt-everywhere-opensource-src-4.8.5/src/corelib/global -I/usr/src/qt-everywhere-opensource-src-4.8.5/src/corelib/xml -I/usr/src/qt-everywhere-opensource-src-4.8.5/tools/shared -DQT_NO_PCRE -DQT_BUILD_QMAKE -DQT_BOOTSTRAPPED -DQLIBRARYINFO_EPOCROOT -DQT_NO_TEXTCODEC -DQT_NO_UNICODETABLES -DQT_NO_COMPONENT -DQT_NO_STL -DQT_NO_COMPRESS -I/usr/src/qt-everywhere-opensource-src-4.8.5/mkspecs/qws/linux-x86_64-g++ -DHAVE_QCONFIG_CPP -DQT_NO_THREAD -DQT_NO_QOBJECT -DQT_NO_GEOM_VARIANT -DQT_NO_DEPRECATED  option.cpp
g++ -o "/usr/src/qt-everywhere-opensource-src-4.8.5/bin/qmake" project.o property.o main.o makefile.o unixmake2.o unixmake.o mingw_make.o option.o winmakefile.o projectgenerator.o meta.o makefiledeps.o metamakefile.o xmloutput.o pbuilder_pbx.o borland_bmake.o msvc_vcproj.o msvc_vcxproj.o msvc_nmake.o msvc_objectmodel.o msbuild_objectmodel.o symmake.o initprojectdeploy_symbian.o symmake_abld.o symmake_sbsv2.o symbiancommon.o registry.o epocroot.o gbuild.o qtextcodec.o qutfcodec.o qstring.o qtextstream.o qiodevice.o qmalloc.o qglobal.o qbytearray.o qbytearraymatcher.o qdatastream.o qbuffer.o qlist.o qfile.o qfilesystementry.o qfilesystemengine_unix.o qfilesystemengine.o qfilesystemiterator_unix.o qfsfileengine_unix.o qfsfileengine.o qfsfileengine_iterator.o qregexp.o qvector.o qbitarray.o qdir.o qdiriterator.o quuid.o qhash.o qfileinfo.o qdatetime.o qstringlist.o qabstractfileengine.o qtemporaryfile.o qmap.o qmetatype.o qsettings.o qsystemerror.o qlibraryinfo.o qvariant.o qvsnprintf.o qlocale.o qlocale_tools.o qlocale_unix.o qlinkedlist.o qnumeric.o qcryptographichash.o qxmlstream.o qxmlutils.o


You have not explicitly asked to use pkg-config and are cross-compiling.
pkg-config will not be used to automatically query cflag/lib parameters for
dependencies


The system floating point format could not be detected.
This may cause data to be generated in a wrong format
Turn on verbose messaging (-v) to see the final report.
OpenSSL support cannot be enabled due to functionality tests!
 Turn on verbose messaging (-v) to ./configure to see the final report.
 If you believe this message is in error you may use the continue
 switch (-continue) to ./configure to continue.

提前致谢.

DEP

为 Pandaboard 交叉编译 Qt

问题描述

推荐答案