使用 Arduino 模拟 Android 主机卡

问题描述

我正在尝试在我的 Nexus4 HCE 和 Arduino PN532 芯片之间建立通信.在 Arduino 的串行监视器上，我可以看到一些数据事务正在发生.但在安多里德方面，我得到

I am trying to build a communication between my Nexus4 HCE and Arduino PN532 Chip. on The Serial Monitor of Arduino,I could see some data transaction happening. But on ANdorid side, I get

CET4T: Unsupported Class byte (0x60)

CET4T: Unsupported Class byte (0xA0)

BrcmNfcNfa﹕ UICC[0x0] is not activated

下面是我的 apduservice.xml

<host-apdu-service xmlns:android="http://schemas.android.com/apk/res/android"
    android:description="@string/servicedesc"
    android:apduServiceBanner="@drawable/ic_launcher"
    android:requireDeviceUnlock="false" >

    <aid-group
        android:category="other"
        android:description="@string/aiddescription" >
        <aid-filter android:name="F0010203040506" />
        <aid-filter android:name="F0394148148100" />
        <aid-filter android:name="4C656C616E746F73"/>
    </aid-group>

</host-apdu-service>

下面是我的 Arduino Side Code

#include <PN532.h>
#include <SPI.h>

/*Chip select pin can be connected to D10 or D9 which is hareware optional*/
/*if you the version of NFC Shield from SeeedStudio is v2.0.*/
#define PN532_CS 10
PN532 nfc(PN532_CS);

uint8_t written=0;
#define  NFC_DEMO_DEBUG 1

void setup(void) {
#ifdef NFC_DEMO_DEBUG
  Serial.begin(9600);
  Serial.println("Hello!");
#endif
  nfc.begin();

  uint32_t versiondata = nfc.getFirmwareVersion();
  if (! versiondata) {
#ifdef NFC_DEMO_DEBUG
    Serial.print("Didn't find PN53x board");
#endif
    while (1); // halt
  }
#ifdef NFC_DEMO_DEBUG
  // Got ok data, print it out!
  Serial.print("Found chip PN5");
  Serial.println((versiondata>>24) & 0xFF, HEX);
  Serial.print("Firmware ver. ");
  Serial.print((versiondata>>16) & 0xFF, DEC);
  Serial.print('.');
  Serial.println((versiondata>>8) & 0xFF, DEC);
  Serial.print("Supports ");
  Serial.println(versiondata & 0xFF, HEX);
#endif
  // configure board to read RFID tags and cards
  nfc.SAMConfig();
}

void loop(void)
{
  uint32_t id;
  // look for MiFare type cards
  id = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A);

  if (id != 0)
  {
#ifdef NFC_DEMO_DEBUG
    Serial.print("Read card #");
    Serial.println(id);
    Serial.println();
#endif
    uint8_t keys[] = {
    0x00, /* CLA */
    0xA4, /* INS */
    0x04, /* P1  */
    0x00, /* P2  */
    0x08, /* Lc  */
    0x4C, 0x65, 0x6C, 0x61, 0x6E, 0x74, 0x6F, 0x73,
    0x00  /* Le  */ };
    uint8_t writeBuffer[16];
    for(uint8_t i = 0;i < 16;i ++)
    {
      writeBuffer[i]=i; //Fill buffer with 0,1,2....F
    }
    if(nfc.authenticateBlock(1, id ,0x08,KEY_A,keys)) //authenticate block 0x08
    {
      //if authentication successful

      if(written == 0) //Not written
      {
        written = nfc.writeMemoryBlock(1,0x08,writeBuffer); // Write writeBuffer[] to block 0x08
        if(written)
#ifdef NFC_DEMO_DEBUG
          Serial.println("Write Successful");
#endif
      }


      uint8_t block[16];
      //read memory block 0x08
      if(nfc.readMemoryBlock(1,0x08,block))
      {
#ifdef NFC_DEMO_DEBUG
        Serial.println("Read block 0x08:");
        //if read operation is successful
        for(uint8_t i=0;i<16;i++)
        {
          //print memory block
          Serial.print(block[i],HEX);
          Serial.print(" ");
        }
        Serial.println();
#endif
      }
    }
  }

  delay(500);
}

以下是Arduino Serial Monitor的日志

Hello!
Found chip PN532
Firmware ver. 1.6
Supports 7
Found 1 tags
Sens Response: 0x4
Sel Response: 0x60
 0x8 0x1B 0x14 0x83Read card #135992451

Write Successful
Read block 0x08:
6E 0 7C 0 AA AA AA AA AA AA AA AA AA AA AA AA
Found 1 tags
Sens Response: 0x4
Sel Response: 0x60
 0x8 0x26 0x40 0x85Read card #136724613

Read block 0x08:
6E 0 7C 0 AA AA AA AA AA AA AA AA AA AA AA AA

参考:许多 SOF 答案/https://github.com/grundid/host-卡模拟样本

References : Many SOF Answers/ https://github.com/grundid/host-card-emulation-sample

任何灯都会有很大帮助.

Any lights will highly help.

推荐答案

使用 Android HCE，您可以模拟 ISO 14443-4 (ISO-DEP) 非接触式智能卡.该智能卡只能识别 ISO 7816-4 APDU 命令.因此，您的 Android 应用程序注册了某些 AID(智能卡应用程序 DF 名称).为了与您的应用程序通信，您需要通过为这些 AID 之一发出 SELECT [by DF name] APDU 来选择您的应用程序.在此 SELECT 命令之后，所有格式正确的 APDU 命令都将转发到您应用的 HCE 服务，直到使用新的 SELECT [by DF name] 命令选择另一个 AID.

With Android HCE you emulate an ISO 14443-4 (ISO-DEP) contactless smartcard. This smartcard only understands ISO 7816-4 APDU commands. So your Android app registers for certain AIDs (smartcard application DF names). In order to communicate with your app, you need to select your app by issuing a SELECT [by DF name] APDU for one of these AIDs. After this SELECT command, all properly formatted APDU commands will be forwarded to your app's HCE service until another AID is selected with a fresh SELECT [by DF name] command.

然而，您的 Arduino 应用程序会尝试访问 MIFARE Classic 卡(即它发出验证、写入和读取命令).MIFARE Classic 使用不同的协议(既不符合 ISO 14443-4 也不使用 ISO 7816-4 APDU)，因此该协议不能用于与 Android HCE 模拟智能卡交互.

Your Arduino application, however, tries to access a MIFARE Classic card (i.e. it issues authenticate, write and read commands). MIFARE Classic uses a different protocol (neither compliant to ISO 14443-4 nor using ISO 7816-4 APDUs), so this protocol cannot be used to interact with an Android HCE emulated smartcard.

据我所知，用于 NFC Shield 的 Arduino 库目前没有实现 ISO-DEP 通信，因此您需要自己实现 PN532 的协议和操作模式.

As far as I know, the Arduino library for the NFC shield curently does not implement ISO-DEP communication, so you would need to implement that protocol and operation mode of the PN532 on your own.

这篇关于使用 Arduino 模拟 Android 主机卡的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！