在主目标中包含pod，而不在WatchKit扩展中

本文介绍了在主目标中包含pod，而不在WatchKit扩展中的处理方法，对大家解决问题具有一定的参考价值，需要的朋友们下面随着小编来一起学习吧！

问题描述

我在当前项目中添加了WatchKit扩展。该项目使用Cocoapods 0.36.1 添加一些框架，但现在我想从WatchKit扩展项目中排除一些pod。

I added a WatchKit extension to my current project. The project uses Cocoapods 0.36.1 to add some frameworks, but now I want to exclude some pods from the WatchKit extension project.

WatchKit扩展项目不需要我在我的正常目标中使用的很多框架，但是在改变我的Podfile后我无法使Cocoapods正常工作。

The WatchKit extension project doesn't need a lot of frameworks I use in my normal target, but I can't get Cocoapods to work correct after altering my Podfile.

我使用 use_frameworks！，但在运行 pod install 后，我收到以下消息：

I use use_frameworks! in my Podfile, but after running pod install I get the following messages:

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `HomeHandler` to `Pods/Target Support Files/Pods-HomeHandler/Pods-HomeHandler.debug.xcconfig` or include the `Pods/Target Support Files/Pods-HomeHandler/Pods-HomeHandler.debug.xcconfig` in your build configuration.
[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `HomeHandler` to `Pods/Target Support Files/Pods-HomeHandler/Pods-HomeHandler.release.xcconfig` or include the `Pods/Target Support Files/Pods-HomeHandler/Pods-HomeHandler.release.xcconfig` in your build configuration.
[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `HomeHandler WatchKit Extension` to `Pods/Target Support Files/Pods-HomeHandler WatchKit Extension/Pods-HomeHandler WatchKit Extension.debug.xcconfig` or include the `Pods/Target Support Files/Pods-HomeHandler WatchKit Extension/Pods-HomeHandler WatchKit Extension.debug.xcconfig` in your build configuration.
[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `HomeHandler WatchKit Extension` to `Pods/Target Support Files/Pods-HomeHandler WatchKit Extension/Pods-HomeHandler WatchKit Extension.release.xcconfig` or include the `Pods/Target Support Files/Pods-HomeHandler WatchKit Extension/Pods-HomeHandler WatchKit Extension.release.xcconfig` in your build configuration.

我没有更改基本配置的任何设置，但我的3个目标中有2个拥有右 Pods.debug 或 Pods.release 设置。没有基本配置的是WatchKit 应用。

I didn't change any settings for my the base configurations, but 2 of my 3 targets have the right Pods.debug or Pods.release set. The one without base configuration is the WatchKit App.

我的原始Podfile

platform :ios, '8.0'
use_frameworks!

source 'https://github.com/artsy/Specs.git'
source 'https://github.com/CocoaPods/Specs.git'

pod 'AFNetworking', :git => 'https://github.com/AFNetworking/AFNetworking.git'
pod 'CocoaLumberjack', '~> 2.0.0'
pod 'MagicalRecord', :git => "https://github.com/magicalpanda/MagicalRecord.git"
pod 'PureLayout'
pod 'UAProgressView'
pod 'UICKeyChainStore'
pod 'XLForm', git: '[email protected]:xmartlabs/XLForm.git'
pod 'Classy', git: '[email protected]:depl0y/Classy.git'
pod 'Reveal-iOS-SDK', :configurations => ['Debug']
pod 'JBChartView', '~> 2.8.9'
pod 'RFQuiltLayout'
pod 'HUMSlider', '~> 1.0'
pod 'SwiftEventBus', :git => 'https://github.com/cesarferreira/SwiftEventBus.git'

post_install do |installer_representation|
    installer_representation.project.targets.each do |target|
        if target.name == "Pods-AFNetworking"
            target.build_configurations.each do |config|
                config.build_settings['GCC_PREPROCESSOR_DEFINITIONS'] = ['$(inherited)', 'AF_APP_EXTENSIONS=1']
            end
        end
        if target.name == "Pods-PureLayout"
            target.build_configurations.each do |config|
                config.build_settings['GCC_PREPROCESSOR_DEFINITIONS'] = ['$(inherited)', 'PURELAYOUT_APP_EXTENSIONS=1']
            end
        end
    end
end

我改变的Podfile

这是我想从我的WatchKit项目中排除某些pod的地方。

This is where I want to exclude certain pods from my WatchKit project.

platform :ios, '8.0'

use_frameworks!

source 'https://github.com/artsy/Specs.git'
source 'https://github.com/CocoaPods/Specs.git'

link_with "HomeHandler", "HomeHandler WatchKit Extension"

pod 'AFNetworking', :git => 'https://github.com/AFNetworking/AFNetworking.git'
pod 'CocoaLumberjack', '~> 2.0.0'
pod 'MagicalRecord', :git => "https://github.com/magicalpanda/MagicalRecord.git"

pod 'UICKeyChainStore'

target :HomeHandler do
    pod 'XLForm', git: '[email protected]:xmartlabs/XLForm.git'
    pod 'UAProgressView'
    pod 'Classy', git: '[email protected]:depl0y/Classy.git'
    pod 'Reveal-iOS-SDK', :configurations => ['Debug']
    pod 'JBChartView', '~> 2.8.9'
    pod 'RFQuiltLayout'
    pod 'HUMSlider', '~> 1.0'
    pod 'SwiftEventBus', :git => 'https://github.com/depl0y/SwiftEventBus.git'
    pod 'PureLayout'
end

post_install do |installer_representation|
    installer_representation.project.targets.each do |target|
        if target.name == "Pods-AFNetworking"
            target.build_configurations.each do |config|
                config.build_settings['GCC_PREPROCESSOR_DEFINITIONS'] = ['$(inherited)', 'AF_APP_EXTENSIONS=1']
            end
        end
        if target.name == "Pods-PureLayout"
            target.build_configurations.each do |config|
                config.build_settings['GCC_PREPROCESSOR_DEFINITIONS'] = ['$(inherited)', 'PURELAYOUT_APP_EXTENSIONS=1']
            end
        end
    end
end

推荐答案

CocoaPods输出的警告是由于两个CocoaPods目标试图链接到您的应用程序中的单个目标（不受支持）。

The warnings outputted by CocoaPods is due to two CocoaPods targets are trying to be linked to a single target in your application (which isn't supported).

即，您有一个明确的目标 HomeHandler 和您正在使用 link_withHomeHandler，HomeHandler WatchKit Extension将无名目标链接到HomeHandler。

I.e, you have an explicit target HomeHandler and you are linking the nameless target to HomeHandler too with link_with "HomeHandler", "HomeHandler WatchKit Extension".

我的建议是修改你的Podfile，如下所示：

My suggestion would be to revamp your Podfile to look something like the following:

platform :ios, '8.0'
use_frameworks!

source 'https://github.com/artsy/Specs.git'
source 'https://github.com/CocoaPods/Specs.git'

def shared_pods
    pod 'AFNetworking', :git => 'https://github.com/AFNetworking/AFNetworking.git'
    pod 'CocoaLumberjack', '~> 2.0.0'
    pod 'MagicalRecord', :git => "https://github.com/magicalpanda/MagicalRecord.git"
    pod 'UICKeyChainStore'
end

target 'HomeHandler' do
    shared_pods
    pod 'XLForm', git: '[email protected]:xmartlabs/XLForm.git'
    pod 'UAProgressView'
    pod 'Classy', git: '[email protected]:depl0y/Classy.git'
    pod 'Reveal-iOS-SDK', :configurations => ['Debug']
    pod 'JBChartView', '~> 2.8.9'
    pod 'RFQuiltLayout'
    pod 'HUMSlider', '~> 1.0'
    pod 'SwiftEventBus', :git => 'https://github.com/depl0y/SwiftEventBus.git'
    pod 'PureLayout'
end

target 'HomeHandler WatchKit Extension' do
    shared_pods
end

这篇关于在主目标中包含pod，而不在WatchKit扩展中的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！

Watchkit