使用 PHP 8.0 我得到以下内容:在 0.0005030632019043 秒内完成在 0.00066304206848145 秒内完成在 0.00016379356384277 秒内完成在 0.00056815147399902 秒内完成多次重复此测试,排名结果一致.First of all, I understand in 90% of applications the performance difference is completely irrelevant, but I just need to know which is the faster construct. That and...The information currently available on them on the net is confusing. A lot of people say foreach is bad, but technically it should be faster since it's suppose to simplify writing a array traversal using iterators. Iterators, which are again suppose to be faster, but in PHP are also apparently dead slow (or is this not a PHP thing?). I'm talking about the array functions: next() prev() reset() etc. well, if they are even functions and not one of those PHP language features that look like functions.To narrow this down a little: I'm not interesting in traversing arrays in steps of anything more than 1 (no negative steps either, ie. reverse iteration). I'm also not interested in a traversal to and from arbitrary points, just 0 to length. I also don't see manipulating arrays with more than 1000 keys happening on a regular basis, but I do see a array being traversed multiple times in the logic of a application! Also as for operations, largely only string manipulation and echo'ing.Here are few reference sites:http://www.phpbench.com/http://www.php.lt/benchmark/phpbench.phpWhat I hear everywhere:foreach is slow, and thus for/while is fasterPHPs foreach copies the array it iterates over; to make it faster you need to use referencescode like this: $key = array_keys($aHash); $size = sizeOf($key); for ($i=0; $i < $size; $i++) is faster than a foreachHere's my problem. I wrote this test script: http://pastebin.com/1ZgK07US and no matter how many times I run the script, I get something like this:foreach 1.1438131332397foreach (using reference) 1.2919359207153for 1.4262869358063foreach (hash table) 1.5696921348572for (hash table) 2.4778981208801In short:foreach is faster than foreach with referenceforeach is faster than forforeach is faster than for for a hash tableCan someone explain?Am I doing something wrong?Is PHP foreach reference thing really making a difference? I mean why would it not copy it if you pass by reference?What's the equivalent iterator code for the foreach statement; I've seen a few on the net but each time I test them the timing is way off; I've also tested a few simple iterator constructs but never seem to get even decent results -- are the array iterators in PHP just awful?Are there faster ways/methods/constructs to iterate though a array other than FOR/FOREACH (and WHILE)?PHP Version 5.3.0Edit: AnswerWith help from people here I was able to piece together the answers to all question. I'll summarize them here:"Am I doing something wrong?" The consensus seems to be: yes, I can't use echo in benchmarks. Personally, I still don't see how echo is some function with random time of execution or how any other function is somehow any different -- that and the ability of that script to just generate the exact same results of foreach better than everything is hard to explain though just "you're using echo" (well what should I have been using). However, I concede the test should be done with something better; though a ideal compromise does not come to mind."Is PHP foreach reference thing really making a difference? I mean why would it not copy it if you pass by reference?" ircmaxell shows that yes it is, further testing seems to prove in most cases reference should be faster -- though given my above snippet of code, most definitely doesn't mean all. I accept the issue is probably too non-intuitive to bother with at such a level and would require something extreme such as decompiling to actually determine which is better for each situation."What's the equivalent iterator code for the foreach statement; I've seen a few on the net but each time I test them the timing is way off; I've also tested a few simple iterator constructs but never seem to get even decent results -- are the array iterators in PHP just awful?" ircmaxell provided the answer bellow; though the code might only be valid for PHP version >= 5"Are there faster ways/methods/constructs to iterate though a array other than FOR/FOREACH (and WHILE)?" Thanks go to Gordon for the answer. Using new data types in PHP5 should give either a performance boost or memory boost (either of which might be desirable depending on your situation). While speed wise a lot of the new types of array don't seem to be better than array(), the splpriorityqueue and splobjectstorage do seem to be substantially faster. Link provided by Gordon: http://matthewturland.com/2010/05/20/new-spl-features-in-php-5-3/Thank you everyone who tried to help.I'll likely stick to foreach (the non-reference version) for any simple traversal. 解决方案 My personal opinion is to use what makes sense in the context. Personally I almost never use for for array traversal. I use it for other types of iteration, but foreach is just too easy... The time difference is going to be minimal in most cases.The big thing to watch for is:for ($i = 0; $i < count($array); $i++) {That's an expensive loop, since it calls count on every single iteration. So long as you're not doing that, I don't think it really matters...As for the reference making a difference, PHP uses copy-on-write, so if you don't write to the array, there will be relatively little overhead while looping. However, if you start modifying the array within the array, that's where you'll start seeing differences between them (since one will need to copy the entire array, and the reference can just modify inline)...As for the iterators, foreach is equivalent to:$it->rewind();while ($it->valid()) { $key = $it->key(); // If using the $key => $value syntax $value = $it->current(); // Contents of loop in here $it->next();}As far as there being faster ways to iterate, it really depends on the problem. But I really need to ask, why? I understand wanting to make things more efficient, but I think you're wasting your time for a micro-optimization. Remember, Premature Optimization Is The Root Of All Evil...Edit: Based upon the comment, I decided to do a quick benchmark run...$a = array();for ($i = 0; $i < 10000; $i++) { $a[] = $i;}$start = microtime(true);foreach ($a as $k => $v) { $a[$k] = $v + 1;}echo "Completed in ", microtime(true) - $start, " Seconds\n";$start = microtime(true);foreach ($a as $k => &$v) { $v = $v + 1;}echo "Completed in ", microtime(true) - $start, " Seconds\n";$start = microtime(true);foreach ($a as $k => $v) {}echo "Completed in ", microtime(true) - $start, " Seconds\n";$start = microtime(true);foreach ($a as $k => &$v) {}echo "Completed in ", microtime(true) - $start, " Seconds\n";And the results:Completed in 0.0073502063751221 SecondsCompleted in 0.0019769668579102 SecondsCompleted in 0.0011849403381348 SecondsCompleted in 0.00111985206604 SecondsSo if you're modifying the array in the loop, it's several times faster to use references...And the overhead for just the reference is actually less than copying the array (this is on 5.3.2)... So it appears (on 5.3.2 at least) as if references are significantly faster...EDIT: Using PHP 8.0 I got the following:Completed in 0.0005030632019043 SecondsCompleted in 0.00066304206848145 SecondsCompleted in 0.00016379356384277 SecondsCompleted in 0.00056815147399902 SecondsRepeated this test numerous times and ranking results were consistent. 这篇关于PHP 中 FOR 与 FOREACH 的性能的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持! 上岸,阿里云!
07-23 03:42
查看更多