问题描述
我正在研究一个通过src获取图像数组并将它们合并为单个平铺图像的类，类似于下图;
I'm working on a class that takes an array of images by src and merges them into a single tiled image, similar to the following image;
唯一的问题是提供给班级的图像不是如上图所示的设定尺寸。
The only issue is the images provided to the class aren't of set dimensions like in the image above.
该类的以下状态创建了一个垂直堆叠的图像列表，没有间隙（示例如下所示），并自动计算导出图像所需的高度（以 $ total_height 计算）。
The following state of the class creates a vertically stacked list of the images without gaps (an example shown below), and calculates the required height of the export image automatically (calculated in $total_height).
我想差距是不可避免的在最终输出中，由于图像尺寸的无限变化，但是我不知道从何处开始水平和垂直整合平铺。
I imagine gaps are inevitable in the final output one way or another due to the infinite variation in image dimensions, but I'm not sure where to start in incorporating tiling horizontally as well as vertically.
class BoardCreator {
private $_img_type;
private $_img_urls = array();
public function __construct($img_export_type, array $img_urls) {
$this->_img_type = $img_export_type; // File format for exported image
$this->_img_urls = $img_urls; // Array of image URLs
}
public function GenerateBoard() {
/*
* Arrays to hydrate with loaded image properties & resources
*/
$images = array(); // Image resources
$width = array(); // Image widths
$height = array(); // Image heights
$total_height = 0; // Total height required for the board
/*
* Load in each image, and store its width & height
*/
for ($i=0; $i < count($this->_img_urls); $i++) {
switch (exif_imagetype($this->_img_urls[$i])) {
case IMAGETYPE_JPEG :
$images[$i] = imagecreatefromjpeg($this->_img_urls[$i]);
break;
case IMAGETYPE_PNG :
$images[$i] = imagecreatefrompng($this->_img_urls[$i]);
break;
case IMAGETYPE_GIF :
$images[$i] = imagecreatefromgif($this->_img_urls[$i]);
break;
// default w/ error required
}
// Store the image's dimensions
list($width[$i], $height[$i]) = getimagesize($this->_img_urls[$i]);
// Add this image's height to the required canvas height
$total_height = $total_height + $height[$i];
}
/*
* Create a new "canvas" image with specified dimensions
*/
$canvas_image = imagecreatetruecolor($width[0], $total_height);
/*
* Copy each image into the "canvas" image generated above
*/
$current_x = 0;
$current_y = 0;
for ($i=0; $i < count($images); $i++) {
imagecopy(
$canvas_image, // destination image
$images[$i], // source image
0, // x co-ordinate of destination
$current_y, // y co-ordinate of destination
0, // x co-ordinate of source
0, // y co-ordinate of source
$width[$i], // source img width
$height[$i] // source img height
);
$current_y = $current_y + $height[$i];
}
/*
* Save the resulting image in the format specified at initiation
*/
switch ($this->_img_type) {
case "jpg" :
$images[$i] = imagejpeg($canvas_image, "../board_exports/test.jpg");
break;
case "png" :
$images[$i] = imagepng($canvas_image, "../board_exports/test.png");
break;
case "gif" :
$images[$i] = imagegif($canvas_image, "../board_exports/test.gif");
break;
default :
// Create an error to handle here
die("Error in BoardCreator.php (Method GenerateBoard() )");
break;
}
/*
* Release the created image from memory
*/
imagedestroy($canvas_image);
/*
* Loop through and release each loaded image
*/
for ($i=0; $i < count($this->_img_urls); $i++) {
imagedestroy($images[$i]);
}
}
推荐答案
我制作了这段代码来帮助你。
i made this code to help you.
1.-修复图像尺寸的无限变化我使用此功能制作图像的缩略图：
1.- to fix "the infinite variation in image dimensions" i make thumbnails of images with this function:
function generate_image_thumbnail($source_image_path, $thumbnail_image_path,$THUMBNAIL_IMAGE_MAX_WIDTH,$THUMBNAIL_IMAGE_MAX_HEIGHT)
{
$condicion = GetImageSize($source_image_path); // image format?
if($condicion[2] == 1) //gif
$original = imagecreatefromgif("$source_image_path");
if($condicion[2] == 2) //jpg
$original = imagecreatefromjpeg("$source_image_path");
if($condicion[2] == 3) // png
$original = imagecreatefrompng("$source_image_path");
$thumb = imagecreatetruecolor($THUMBNAIL_IMAGE_MAX_WIDTH,$THUMBNAIL_IMAGE_MAX_HEIGHT);
$ancho = imagesx($original);
$alto = imagesy($original);
imagecopyresampled($thumb,$original,0,0,0,0,$THUMBNAIL_IMAGE_MAX_WIDTH,$THUMBNAIL_IMAGE_MAX_HEIGHT,$ancho,$alto);
imagejpeg($thumb,$thumbnail_image_path,90);
return true;
}
2.-创建图像以粘贴缩略图
2.- create an image to paste the thumbnails
$size_image=460;
$img_disp = imagecreatetruecolor($size_image,$size_image);
$backcolor = imagecolorallocate($img_disp,0,0,0);
imagefill($img_disp,0,0,$backcolor);
3.-开始粘贴缩略图
3.- start to paste the thumbnails
//$THUMBNAIL_IMAGE=150;
$images_by_side = round($size_image/$THUMBNAIL_IMAGE); // round(460/150)=3 3 images by side
$separator = $size_image%$THUMBNAIL_IMAGE; //150*3=450... so 10px in total of space
$space_btwen_images=$separator/($images_by_side+1); //10px / 3 of total images + 1 =2,5
$total_image = pow($images_by_side , 2 ); //total images to paste (images by side)^2.. 3^2=9
//some math calculations to make more nice the output image
$dst_x=$space_btwen_images;
$cont_imgs=0;
for($x=0;$x<$total_image;$x++) {
if($cont_imgs == $images_by_side){
$dst_x=$dst_x+$THUMBNAIL_IMAGE+$space_btwen_images;
$cont_imgs=0;
}
$dst_y=$cont_imgs*$THUMBNAIL_IMAGE+($space_btwen_images * ($cont_imgs+1));
$cont_imgs++;
$thumb_image=$img_tmb_dir.$arr_img[$x]; //image to paste
$condicion = GetImageSize($thumb_image); // image format?
if($condicion[2] == 1) // gif
$image_to_copy = imagecreatefromgif("$thumb_image");
if($condicion[2] == 2) // jpg
$image_to_copy = imagecreatefromjpeg("$thumb_image");
if($condicion[2] == 3) // png
$image_to_copy = imagecreatefrompng("$thumb_image");
echo "dst_x=".$dst_x."; dst_y=".$dst_y.";<br>";
//output to check the destinations of the images to paste
/*
dst_x=2.5; dst_y=2.5;
dst_x=2.5; dst_y=155;
dst_x=2.5; dst_y=307.5;
dst_x=155; dst_y=2.5;
dst_x=155; dst_y=155;
dst_x=155; dst_y=307.5;
dst_x=307.5; dst_y=2.5;
dst_x=307.5; dst_y=155;
dst_x=307.5; dst_y=307.5;
*/
imagecopy($img_disp, $image_to_copy, $dst_x, $dst_y, 0, 0, $THUMBNAIL_IMAGE, $THUMBNAIL_IMAGE);
}
imagejpeg($img_disp, "test3.jpg",90);
imageDestroy($img_disp);
echo '<img src="test3.jpg"/>';
4.-
-
我的图像（150 x 150）和$ size_image = 460;将返回
with my images (150 x 150) and $size_image=460; will return
和$ size_image = 610将返回
and $size_image=610 will return
这篇关于PHP GD - 在平铺布局中合并多个图像的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！