问题描述
（我是一个新手，以SSE / ASM，道歉，如果这是显而易见的或冗余）
(I'm a newbie to SSE/asm, apologies if this is obvious or redundant)
有没有更好的办法来调换包含16位值8 SSE寄存器比执行24 unpck [LH] ps和8月16日+洗牌，并使用8额外的寄存器？ （注最多可使用3 SSSE说明，英特尔Merom处理器，又名缺乏的SSE4 BLEND。*）
Is there a better way to transpose 8 SSE registers containing 16-bit values than performing 24 unpck[lh]ps and 8/16+ shuffles and using 8 extra registers? (Note using up to SSSE 3 instructions, Intel Merom, aka lacking BLEND* from SSE4.)
假设你有寄存器v [0-7]，并用T0-T7作为辅助寄存器。在伪内在code：
Say you have registers v[0-7] and use t0-t7 as aux registers. In pseudo intrinsics code:
/* Phase 1: process lower parts of the registers */
/* Level 1: work first part of the vectors */
/* v[0] A0 A1 A2 A3 A4 A5 A6 A7
** v[1] B0 B1 B2 B3 B4 B5 B6 B7
** v[2] C0 C1 C2 C3 C4 C5 C6 C7
** v[3] D0 D1 D2 D3 D4 D5 D6 D7
** v[4] E0 E1 E2 E3 E4 E5 E6 E7
** v[5] F0 F1 F2 F3 F4 F5 F6 F7
** v[6] G0 G1 G2 G3 G4 G5 G6 G7
** v[7] H0 H1 H2 H3 H4 H5 H6 H7 */
t0 = unpcklps (v[0], v[1]); /* Extract first half interleaving */
t1 = unpcklps (v[2], v[3]); /* Extract first half interleaving */
t2 = unpcklps (v[4], v[5]); /* Extract first half interleaving */
t3 = unpcklps (v[6], v[7]); /* Extract first half interleaving */
t0 = pshufhw (t0, 0xD8); /* Flip middle 2 high */
t0 = pshuflw (t0, 0xD8); /* Flip middle 2 low */
t1 = pshufhw (t1, 0xD8); /* Flip middle 2 high */
t1 = pshuflw (t1, 0xD8); /* Flip middle 2 low */
t2 = pshufhw (t2, 0xD8); /* Flip middle 2 high */
t2 = pshuflw (t2, 0xD8); /* Flip middle 2 low */
t3 = pshufhw (t3, 0xD8); /* Flip middle 2 high */
t3 = pshuflw (t3, 0xD8); /* Flip middle 2 low */
/* t0 A0 B0 A1 B1 A2 B2 A3 B3 (A B - 0 1 2 3)
** t1 C0 D0 C1 D1 C2 D2 C3 D3 (C D - 0 1 2 3)
** t2 E0 F0 E1 F1 E2 F2 E3 F3 (E F - 0 1 2 3)
** t3 G0 H0 G1 H1 G2 H2 G3 H3 (G H - 0 1 2 3) */
/* L2 */
t4 = unpcklps (t0, t1);
t5 = unpcklps (t2, t3);
t6 = unpckhps (t0, t1);
t7 = unpckhps (t2, t3);
/* t4 A0 B0 C0 D0 A1 B1 C1 D1 (A B C D - 0 1)
** t5 E0 F0 G0 H0 E1 F1 G1 H1 (E F G H - 0 1)
** t6 A2 B2 C2 D2 A3 B3 C3 D3 (A B C D - 2 3)
** t7 E2 F2 G2 H2 E3 F3 G3 H3 (E F G H - 2 3) */
/* Phase 2: same with higher parts of the registers */
/* A A0 A1 A2 A3 A4 A5 A6 A7
** B B0 B1 B2 B3 B4 B5 B6 B7
** C C0 C1 C2 C3 C4 C5 C6 C7
** D D0 D1 D2 D3 D4 D5 D6 D7
** E E0 E1 E2 E3 E4 E5 E6 E7
** F F0 F1 F2 F3 F4 F5 F6 F7
** G G0 G1 G2 G3 G4 G5 G6 G7
** H H0 H1 H2 H3 H4 H5 H6 H7 */
t0 = unpckhps (v[0], v[1]);
t0 = pshufhw (t0, 0xD8); /* Flip middle 2 high */
t0 = pshuflw (t0, 0xD8); /* Flip middle 2 low */
t1 = unpckhps (v[2], v[3]);
t1 = pshufhw (t1, 0xD8); /* Flip middle 2 high */
t1 = pshuflw (t1, 0xD8); /* Flip middle 2 low */
t2 = unpckhps (v[4], v[5]);
t2 = pshufhw (t2, 0xD8); /* Flip middle 2 high */
t2 = pshuflw (t2, 0xD8); /* Flip middle 2 low */
t3 = unpckhps (v[6], v[7]);
t3 = pshufhw (t3, 0xD8); /* Flip middle 2 high */
t3 = pshuflw (t3, 0xD8); /* Flip middle 2 low */
/* t0 A4 B4 A5 B5 A6 B6 A7 B7 (A B - 4 5 6 7)
** t1 C4 D4 C5 D5 C6 D6 C7 D7 (C D - 4 5 6 7)
** t2 E4 F4 E5 F5 E6 F6 E7 F7 (E F - 4 5 6 7)
** t3 G4 H4 G5 H5 G6 H6 G7 H7 (G H - 4 5 6 7) */
/* Back to first part, v[0-3] can be re-written now */
/* L3 */
v[0] = unpcklpd (t4, t5);
v[1] = unpckhpd (t4, t5);
v[2] = unpcklpd (t6, t7);
v[3] = unpckhpd (t6, t7);
/* v[0] = A0 B0 C0 D0 E0 F0 G0 H0
** v[1] = A1 B1 C1 D1 E1 F1 G1 H1
** v[2] = A2 B2 C2 D2 E2 F2 G2 H2
** v[3] = A3 B3 C3 D3 E3 F3 G3 H3 */
/* Back to second part, t[4-7] can be re-written now... */
/* L2 */
t4 = unpcklps (t0, t1);
t5 = unpcklps (t2, t3);
t6 = unpckhps (t0, t1);
t7 = unpckhps (t2, t3);
/* t4 A4 B4 C4 D4 A5 B5 C5 D5 (A B C D - 4 5)
** t5 E4 F4 G4 H4 E5 F5 G5 H5 (E F G H - 4 5)
** t6 A6 B6 C6 D6 A7 B7 C7 D7 (A B C D - 6 7)
** t7 E6 F6 G6 H6 E7 F7 G7 H7 (E F G H - 6 7) */
/* L3 */
v[4] = unpcklpd (t4, t5);
v[5] = unpckhpd (t4, t5);
v[6] = unpcklpd (t6, t7);
v[7] = unpckhpd (t6, t7);
/* v[4] = A4 B4 C4 D4 E4 F4 G4 H4
** v[5] = A5 B5 C5 D5 E5 F5 G5 H5
** v[6] = A6 B6 C6 D6 E6 F6 G6 H6
** v[7] = A7 B7 C7 D7 E7 F7 G7 H7 */
每个unpck *需要3个周期的延迟，或2互惠吞吐量（按瓦格纳的报道。）这是使用（在此code），SSE，因为这个寄存器舞蹈花费将近一杀的性能提升很大一部分每个元素周期。我试图了解86转X264的ASM文件，但未能理解宏。
Each unpck* takes 3 cycles of latency, or 2 for reciprocal throughput (reported by Agner.) This is killing big part of the performance gains from using SSE (on this code) because this register dance takes almost one cycle per element. I tried to understand x264's asm file for x86 transpose but failed understanding the macros.
谢谢！
推荐答案
是的，你可以做到在24个指令总：
Yes, you can do it in 24 instructions total:
8 x _mm_unpacklo_epi16/_mm_unpackhi_epi16 (PUNPCKLWD/PUNPCKHWD)
8 x _mm_unpacklo_epi32/_mm_unpackhi_epi32 (PUNPCKLDQ/PUNPCKHDQ)
8 x _mm_unpacklo_epi64/_mm_unpackhi_epi64 (PUNPCKLQDQ/PUNPCKHQDQ)
让我知道如果你需要更多的细节，但它是相当明显的。
Let me know if you need more details, but it's fairly obvious.
这篇关于转上SSE2 / SSSE3 16位元素的8个寄存器的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！